CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

Driver Complement
Mid/Woofer     1 - 8" Diameter (20.32cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 1" Diameter (2.54cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     35Hz-20kHz
Lower -3dB Limit     50Hz
Upper -3dB Limit     20Khz
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     90 dB
Dimensions
Overall Diameter     10-5/8“(26.99cm)
Cut-out Diameter     9-3/8“(23.81cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-7/8" (9.84cm)
Overall Depth     4-3/8" (11.11cm)
Shipping/Other      
Product Weight     3.5000 lbs. (1.59kgs) each
Total Shipping Weight     5.0000 lbs. (2.27kgs)
Speaker Warranty     Lifetime Warranty

The JBL Professional Control 227C is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227C incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 227C features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. An 8 ohm driver is utilized on the Control 227C and offers 150 Watts of continuous power handling capability.

The Control 227C is easy to install and features a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.

The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

To ensure long life and reliability, Control 227C passes JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.

Features

• Consistent 120° broadband pattern control forexceptional coverage
• Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
• Extraordinary clarity for speech and vocals withextended frequency response for music
• 150 Watts Power Handling
• Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
• Integrated back can with clean, contemporary grille (sold separately)

Specifications

• Frequency Range (-10dB): 43Hz - 19kHz
• Frequency Response (-3dB): 75Hz - 17kHz
• Nominal Sensitivity: 90dB measured half-space; 95dBcomputed for competitive comparison
• Nominal Coverage Angle: 120 degrees conical,broadband
• Nominal Impedance: 8 ohms
• Low Frequency: 6.5" Kevlar reinforced cone
• High Frequency: 1" exit compression driver
• Dimensions (H x Dia.): 12" round baffle x depth fromback of baffle of 5.8“

Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.

Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums