DEFINITIVE TECHNOLOGY Studio Monitor 55 (PAIR)

One 1" pure aluminum dome tweeter.
One 6-1/2" BDSS cast basket driver pressure coupled
to one 6“x10" low bass radiator.
Freq. Response: 32 Hz - 30 kHz.
Impedance: 8 Ohms.
Sensitivity: 90 dB.
Rec. Ampl. Power: 20 - 225 watts.
Inputs: Bi-amp/bi-wire 5 way binding post terminals.
Finish: Wood grain matte black enclosure with high
gloss black baffle and trim.
Dimensions: 32.9 x 20 x 31 cm.
Weight: 7 kg each.

The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.

The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.

Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.

The S8018 II high-efficiency subwoofer is the ideal low-frequency extension to complement RCF installed systems.

The low-frequency transducer is a hypervented vented, high excursion RCF Precision 18” woofer with a 4” inside/outside voice coil to minimize power compression and extend the life of the product.
Using bass-reflex loading the subwoofer design ensures an efficient acoustic response down to 30 Hz. The Baltic birch plywood enclosure is painted with black, heavy duty, textured epoxy. The front is protected by a strong powder coated metal grille. The cabinet features two Neutrik Speakon™ connectors in a recessed input plate. A M20 pole mount adaptor is provided on the top of the cabinet, integrated hand carry points on the cabinet sides.

• 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
• 137 dB maximum sound pressure level
• Response down to 30 Hz
• Rectangular box enclosure with protective metal grille
• 35 mm standard pole mount in top section of cabinet
• Baltic Birch cabinet painted with black, heavy duty, textured epoxy
• Integrated hand carry points

• Frequency Response -10 dB: 30 Hz ÷ 200 Hz
• Max SPL @ 1m: 137 dB
• System Sensitivity: 100 dB
• Nominal Impedance: 8 Ω
• Power Handling: 1500 W
• Peak Power Handling: 6000 W
• Recommended Amplifier: 3000 W

• Woofer: 18" woofer, 4" voice coil
• Nominal Impedance: 8 Ω
• Input Power Rating: 1500 W AES
• Sensitivity: 100 dB

• Input connector: Speakon NL4

• Cabinet Material: 15 mm birch plywood construction
• Handles: 2 on side
• Grille: Custom perforated steel grille
• Colour: Black, scratch resistant paint

• Height: 630 / 24.80 mm/inch
• Width: 530 / 20.87 mm/inch
• Depth: 770 / 30.31 mm/inch
• Net Weight: 43 / 94.60 kg/lbs

• Compact, high-performance passive direct box
• Jack input 1/4" TS in and parallel out
• Gold-plated XLR output / impedance balanced
• Super-flat frequency output for uncolored sound
• Switchable filter that optimizes the DI for guitars
• Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
• Instruments or amplifier outputs with up to 3,000 watts can be connected directly
• Offers impedance and signal matching of instruments to mixers
• Perfect for stage and studio use
• Ground lift switch eliminates typical ground loop problems
• Rugged metal case can take the rigors of the road

• Type: Passive DI Box
• Channels: 1
• Ground Lift: Yes
• Inputs: 1 x 1/4"
• Outputs: 1 x 1/4“, 1 x XLR
• Height: 1.4"
• Width: 3.75"
• Depth: 5"
• Weight: 0.66 lbs.
• Manufacturer Part Number: DI600P

The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.

The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
 

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel