Electro voice PL84 Cardioid Condenser Microphone Self Biased

Discontinued

109.89 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Audio Frequency Response    50 Hz – 20,000 Hz Case Material    Die cast zinc Connector Type    3-pin XLR Dynamic Range    115 dB Element    Condenser (self-biased) Finish    Textured Satin Black Impedance, Low-Z balanced    200 Ω Maximum SPL (1% THD)    141 dB Mic Type    Handheld Open Circuit Voltage    3.5 mV/Pascal Polar Pattern    Cardioid Power Requirement    11 to 52 […]

 

Read more

Audio Frequency Response    50 Hz – 20,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Dynamic Range    115 dB
Element    Condenser (self-biased)
Finish    Textured Satin Black
Impedance, Low-Z balanced    200 Ω
Maximum SPL (1% THD)    141 dB
Mic Type    Handheld
Open Circuit Voltage    3.5 mV/Pascal
Polar Pattern    Cardioid
Power Requirement    11 to 52 VDC, 1.9 mV
Wired/Wireless    Wired
Weight Net    9.21 oz (261 g)

Weight 0.61 kg

Reviews

There are no reviews yet.

Be the first to review “Electro voice PL84 Cardioid Condenser Microphone Self Biased”

Your email address will not be published. Required fields are marked *

Quick Comparison

Electro voice PL84 Cardioid Condenser Microphone Self Biased removeAKG CK 33 - Cardioid Condenser Microphone removeSENNHEISER ME-65 Electret Microphone removeAKG SE300B - Preamp unit removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW removeRODE NT-5-MP Matched Pair Condenser Microphones remove
NameElectro voice PL84 Cardioid Condenser Microphone Self Biased removeAKG CK 33 - Cardioid Condenser Microphone removeSENNHEISER ME-65 Electret Microphone removeAKG SE300B - Preamp unit removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW removeRODE NT-5-MP Matched Pair Condenser Microphones remove
Image
SKUPL84CK 33H10SE00038SE 300BH10SE00009H11RD00005
Rating
Price109.89 incl. GR VAT 164.00 incl. GR VAT 119.00 incl. GR VAT 178.00 incl. GR VAT 150.00 incl. GR VAT 329.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 2 left in stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 2 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Audio Frequency Response    50 Hz - 20,000 Hz
Case Material    Die cast zinc
Connector Type    3-pin XLR
Dynamic Range    115 dB
Element    Condenser (self-biased)
Finish    Textured Satin Black
Impedance, Low-Z balanced    200 Ω
Maximum SPL (1% THD)    141 dB
Mic Type    Handheld
Open Circuit Voltage    3.5 mV/Pascal
Polar Pattern    Cardioid
Power Requirement    11 to 52 VDC, 1.9 mV
Wired/Wireless    Wired
Weight Net    9.21 oz (261 g)

Technical specifications

Polar pattern

hypercardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Connector

Discreet Acoustics Modular standard

Finish

matte dark gray

Dimensions

13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)

Net weight

5 g (0.17 oz.)

Shipping weight

88 g (3.1 oz.)

Accessories (included)

W 30

The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.

 

  • Pick-up pattern : super-cardioid
  • Sensitivity in free field, no load (1kHz) : 10 mV/Pa +- 2,5 dB
  • Nominal impedance : 200 Ohm (K6)
  • Min. terminating impedance : 1000 Ohm (K6)
  • Equivalent noise level : 20 dB
  • Dimensions : d 44 x 131 mm
  • Weight :

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.

Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62

Technical Data
Pick-up pattern  omni 
Sensitivity in free field, no load (1kHz)  31 mV/Pa +- 2,5 dB 
Nominal impedance  200 Ohm (K6) 
Min. terminating impedance  1000 Ohm (K6) 
Equivalent noise level  15 dB 
Equivalent noise level weighted as per CCIR 468-3  27 dB 
Dimensions  d 22,5 x 94 mm 
Weight  30 g 

The NT5 matched pairs are a masterpiece of small-diaphragm cardioid- condenser microphone design.Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a .5? capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. SPECIFICATIONS: Acoustic principle: Externally polarised single diaphragm Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100? Signal noise ratio din iec 651:  78dB Equvalent noise:  Maximum spl: 143 dB @ 1% THD into 1k_ Sensitivity: -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL Power supply voltage:  P48 Supply (38V?52V), P24 Supply (20V-26V) Current consumption: 4 mA, 2 mA, Weight: 100g
Weight0.61 kg0.30 kg0.80 kg0.50 kg0.30 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.61 kg
Weight 0.30 kg
Weight 0.80 kg
Weight 0.50 kg
Weight 0.30 kg
Weight 2.00 kg

Recently Viewed Products