Content |
Made for permanent sound placement.
The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES
10″ 2-way low-profile installation loudspeaker
10″ high-output ceramic woofer with 2″ voice coil for maximum output
1.4″ titanium compression driver provides smooth, consistent high-frequency response
8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
Rotatable center logo allows for clean presentation in all configurations
Convenient terminal strip connectivity saves time and cost
Dual Neutrik parallel connectors
Lightweight, compact and durable 15mm poplar cabinet construction
SPECIFICATIONS
iP-10 10" 2-Way Passive Loudspeaker
Frequency range (-10 dB): 50 Hz - 20 kHz
Coverage pattern: 90° x 50°
Power handling: 200 watts continuous / 400 watts program
Max SPL: 124 dB
Crossover frequency: 3 kHz
Nominal impedance: 8Ω
Height: 20.5 in / 520 mm
Width (Front): 12 in / 310 mm
Width (Rear): 6.8 in / 172 mm
Depth: 13.4 in / 340 mm
Product weight: 26 lb. / 11.8 kg |
The V10 is a compact, full range, extremely versatile two-way loudspeaker system. It offers substantial power and efficiency for a variety of professional applications that include portable systems, sound reinforcement, permanent installations and supplementary fill for larger systems. The high-frequency section is a constant directivity CMD horn mathematically designed for Coverage Matching Design in relation to the woofer system, loaded on a neodymium compression driver with a 2.5” diaphragm assembly for smooth, controlled dispersion. The low-frequency transducer is a tight, high power 10” mid-bass with a 2.5 ” voice coil
APPLICATIONS
- • Live performance
- • DJ set
- • Rental solutions
- • Permanent installations
General Specs
10" high power, 2.5" voice coil mid bass 1 x 2.5" high power titanium neo compression driver 130 dB max SPL 350 Watt AES High output, response down to 55 Hz Birch plywood cabinet Weather resistant, textured, polyurea finish Epoxy powder coated front grille
TRANSDUCERS
- Compression Driver:0“, 1.7" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:100 W PEAK, 50 WW AES
- Sensitivity:108dB
- Woofer:6“, 1.8" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:300 W PEAK, 150 WW AES
- Sensitivity:94dB
TRANSDUCERS
- Compression Driver:4“, 2.5" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:180 W PEAK 90 WW AES
- Sensitivity:98dB
- Woofer:10“, 2.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:500 W PEAK, 250 WW AES
- Sensitivity:110dB
Acoustical Specs
Frequency Response -10 dB:55 Hz ÷ 20000 Hz Max SPL @ 1m:130 dB Horizontal coverage angle:90° Vertical coverage angle:60° Directivity index; Q:10 System Sensitivity:94 dB Nominal Impedance:8 Ω Power Handling:350 W Peak Power Handling:1400 W Recommended Amplifier:700 W Protections:Dynamic Crossover frequencies:1000 Hz
Cabinet Specs
Cabinet Material:15mm Birch Plywood Hardware:Pole mount, 13 x M10 Pole Mount/Cap:yes Grille:Custom perforated steel grille Colour:black
Size/Weight
Height: 540 / 21.25 mm/inch Width:340 / 13.38 mm/inch Depth:333 / 13.11 mm/inch Net Weight:15 / 33.06 kg/lbs | This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
| Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
|
The C3110 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.The high-frequency section is a constant directivity horn loaded to a 1” Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 10” woofer with a 2” voice coil.
Features |
---|
90° x 70° CMD (Constant Matching Design) constant directivity horn | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network | 4 Suspension points (M10) | 35 mm standard internal pole mount |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 59 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 70 Hz | ÷ 20 kHz | Max SPL @ 1m: | 127 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 70° | | Directivity index; Q: | 9.4 | | System Sensitivity: | 96 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Recommended Amplifier: | 600 | | Protections: | Dynamic | | Crossover frequencies: | 1800 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HF driver, 1.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Woofer: | 10" woofer, 2" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 250 Watts AES | | Sensitivity: | 96 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | Handles: | 1on back | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 300 / 11.81 mm/inch | | Depth: | 287 / 11.30 mm/inch | | Net Weight: | 13 / 28.66 Kg/Lbs |
| The SEM 710 Plus gives you more power for your money. This starter unit features a 10' heavy duty woofer and piezo tweeter, with power handling reaching 300 Watts (Program) or 150 Watts (RMS). The SEM 710 Plus Speakers complement the Powerpods 410 and 620 Plus perfectly to form a cost-effective audio solution for FOH application.
- Double duty: use as a floor monitor or mounted as a raised sound reinforcement speaker
- Power handling: 150 Watts (RMS); 300 Watts (Program)
- Frequency response: 65 Hz ~ 20 KHz
- High sound pressure level, 96 dB SPL @ 1W / 1M
- 10' heavy-duty woofer and piezo tweeter 8 ohm nominal load
- Built-in handle
- 35 mm stand adapter built-in
- Dual 1/4' phone jacks
Cabin Type Wood
Function 2 way multi-use
Monitor Use Yes
Amplifier 150 Watts (RMS); 300 Watts (Program)
LF/MF, Woofer 10''
HF, Horn 1 ''
DSP Processor - Max SPL 96 dB
Dispersion 90x40
Frequency Response 65 Hz ~ 20 KHz
Pole mount -
Rigging -
Connector 2x1/4 jack
Dimensions 351x 491 x 314 (WxHxD)
Weight 11 Kg
Color Black |
Reviews
There are no reviews yet.