| Content | The body of the largest floorstanding speaker in the series has been manufactured from solid MDF panels and is extremely resistant to any kind of intrinsic resonance. As is the case for all other models, the baffle of the Monitor Supreme 2002 has been visually offset from the rest of the housing and is a feature that defines the design of this Magnat speaker.
The speaker, which is available in two high quality wood finishes, is equipped with two 200 mm bass drivers and one 170 mm midrange driver, which offer a particularly high level of dynamics in the bass segment and good precision over the entire frequency range. The coated 25 mm fabric dome with its newly developed tweeter flange also ensures significantly enhanced dispersion properties.
Description
Value
Principle
3 way bass reflex
Equipment
2 x 8” woofer
170 mm midrange
25 mm tweeter
Power Handling (RMS / Max.)
225 / 450 Watts
Sensitivity (2.8V/1m)
93 dB
Impedance
4 – 8 Ohms
Frequency Response
18 - 40000 Hz
Crossover Frequencies
350 Hz, 3.500 Hz
Recommended Amplifier Output
30 - 450 Watts
Dimensions (WxHxD)
267 x 1080 x 335 mm
Weight
23 kg
Cabinet surface
Ash decor black |
System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
![colors_01]( "colors_01")
|
Single Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 6.5” long-throw RDT® bass drivers
1 x 4” RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available
Frequency Response: 35 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Rear Ported HiVe®II technology
Sealed Mid-range TLE®
Mid / H.F Crossover Frequency: 3600 Hz
Bass Low Pass Crossover Frequency: 600 Hz
Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm
(39 5/16 x 14 3/16 x 14 3/4 inches)
Weight (each) Including Plinth: 33Kg (72.7 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors]( "colors")
|
Three way, bass-reflex
Sub-woofer 200 mm.
coated paper
Mid-woofer 130 mm. paper
Tweeter 28 mm. soft dome
coated silky fabric
Impedance: 6 Ohm (min. 4)
RMS Power: 120 W
MAX Power: 200 W
Efficiency: 90 dB/W/1 m
Dimensions: 325x385x1130 mm.
Net weight: 26 Kg.
Finish:
cherrywood, metallized mat grey
|
Driver Complements
Subwoofer 2 - 6" Diameter (15.24cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Ehanced Ring Radiator tweeter
Electrical
Overall Frequency Response 20Hz-40kHz 22Hz-40kHz
Lower -3dB Limit 38Hz dB 42Hz dB
Upper -3dB Limit 30kHz dB 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-300 w/channel 20-250 w/channel
Efficiency 88 dB 88 dB
Crossover Orth Crossover Orth Crossover
Crossover
(mid-high array) 3000Hz 2800Hz
Crossover
(subwoofer) 100HZ 100Hz
Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D
(129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D
(119.38cm H x 21.11cm W x 36.51cm D)
Footprint Size 10 1/2" W x 20 5/16" D
(26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D
(23.50cm W x 41.27cm D)
Mounting Options floor floor
Enclosure Type Sealed Sealed
Enclosure Type
(subwoofer) Dual PowerPort Dual PowerPort bass venting
Shipping/Other
Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs)
Shipping unit: each each
Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs)
Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser)
ALSO AVAILABLE IN "EBONY" COLOR
![]()
|
Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years |
Reviews
There are no reviews yet.