MONKEY BANANA Gibbon 10′ Bi-Amp Sub studio monitor 300W (RED)

465.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Product details Woofer: 10-inch black Glass-Composite Cone Frequency response: 20Hz – 200Hz Crossover frequency: 50Hz – 130Hz adjustable Amplifier Power: 300W S/N Ratio (A weighted): >95dB THD + N @ Rated Power:  0.08% Inputs: 2x XLR, 2x TRS, 2x RCA Connectors Outputs: 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors Input Impedance: 20 […]

 

Read more

Product details

Woofer: 10-inch black Glass-Composite Cone
Frequency response: 20Hz – 200Hz
Crossover frequency: 50Hz – 130Hz adjustable
Amplifier Power: 300W
S/N Ratio (A weighted): >95dB
THD + N @ Rated Power:  0.08%
Inputs: 2x XLR, 2x TRS, 2x RCA Connectors
Outputs: 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors
Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
Phase reverse: 0 / 180° switch
Ground Lift switch: On / Off
Bypass Footswitch: On / Off
Available colors: Red, Black
Net weight: 17.6kg / 38.7lb
Net Dimensions: L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in
Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “MONKEY BANANA Gibbon 10′ Bi-Amp Sub studio monitor 300W (RED)”

Your email address will not be published. Required fields are marked *

Quick Comparison

MONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (RED) removeGENELEC 5040B ACTIVE SUBWOOFER removePRESONUS TEMBLOR T-10 Active subwoofer 250W removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- remove
NameMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (RED) removeGENELEC 5040B ACTIVE SUBWOOFER removePRESONUS TEMBLOR T-10 Active subwoofer 250W removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -YELLOW- remove
Image
SKUGibbon 10R5040BTemblor T-10EV/EM/000010SE7261ATURBO 10S YELLOW
Rating
Price465.00 incl. GR VAT 480.87 incl. GR VAT 388.99 incl. GR VAT 1,205.00 incl. GR VAT 2,225.94 incl. GR VAT711.75 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Product details

Woofer:10-inch black Glass-Composite Cone
Frequency response:20Hz - 200Hz
Crossover frequency:50Hz - 130Hz adjustable
Amplifier Power:300W
S/N Ratio (A weighted):>95dB
THD + N @ Rated Power:  0.08%
Inputs:2x XLR, 2x TRS, 2x RCA Connectors
Outputs:2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors
Input Impedance:20 kOhm balanced, 10 kOhm unbalanced
Phase reverse:0 / 180° switch
Ground Lift switch:On / Off
Bypass Footswitch:On / Off
Available colors:Red, Black
Net weight:17.6kg / 38.7lb
Net Dimensions: L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in

The Genelec 5040B is an extremely compact active subwoofer designed to complement up to five 6010B's with accurate and dynamic bass response reaching down to 35 Hz. Matched perfectly with the 6010B's, the 5040B conveniently features a remote volume control allowing adjustment of the entire sound system as well as versatile acoustic controls for perfect room integration.

Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.

ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.

Designed by Genelec's R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 5040B subwoofer features an unobtrusive, modern appearance.

The 5040B features a magnetically shielded downward firing 6 1/2" bass driver attached to a die-cast aluminium base plate.

The base plate also serves as the chassis for the 40 Watt amplifier and crossover filter circuitry. The 5040B packs a respectable punch of 98 dB maximum sound pressure level

98 dB
Main 35 - 85 Hz (± 3 dB)
LFE 35 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
6.5" Active
40 W
H x D 251 x 305 mm
6.3 Kg (13.9 lb)
5.1 RCA analog in
1 x 3.5 mm stereo jack in
5 x RCA analog out

 

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

  • 10-inch glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

​Controls and filters
  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert and ground-lift switch

Power and safety
  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated, gravity-calibrated rubber feet for stable placement

Inputs and outputs
  • Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼" TRS outputs 
  • XLR subwoofer output for connecting a second T10
Inputs

2- Balanced XLR

2- Balanced ¼" TRS

2- Unbalanced RCA
   
Outputs

2- Balanced XLR (full range with 80 Hz HPF option)

2- Balanced ¼" TRS (full range with 80 Hz HPF option)

1- Balanced XLR (Sub Out)
Performance
Frequency Response 20 Hz - 200 Hz 
Low Pass Filter Frequency 50 - 130 Hz (variable)
Signal-to-Noise Ratio >98 dB
THD 0.019% @ power

12" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Frequency response curve

Product TS112
Description Subwoofer
Dimensions (WxHxD) [mm] 390 x 560 x 508
Dimensions (WxHxD) [“] 15.35 x 22.05 x 20
Free-field frequency range (-3dB) 24Hz - 300Hz
Woofer 300mm/12“
Maximum SPL @ 1m 112dB
Number of amplifiers 1
Total short-term output power 400W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 410VA
Misc.
Weight kg/lb. 25.5 / 56.2

Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.

The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.

The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.

108 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
GLM tone controls
10“
120 W
H x W x D  527 x 462 x 363 mm
27 Kg (59 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

Weight8.00 kg7.00 kg17.90 kg25.50 kg27.00 kg22.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 7.00 kg
Weight 17.90 kg
Weight 25.50 kg
Weight 27.00 kg
Weight 22.40 kg

Recently Viewed Products