RCF MSW8 – 12

Discontinued

638.90 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
12″ SUBWOOFER FOR MONITOR SPEAKERS The MSW 8 is a professional subwoofer that has been expre ssly designed for use with the MONΙTOR 8 or 8W speaker ? The special dual load reflex configuration makes it possible to obtain a high level of efficiency, as well as a considerably extended low range frequency response and […]

 

Read more

12″ SUBWOOFER FOR MONITOR SPEAKERS

The MSW 8 is a professional subwoofer that has been expre ssly designed for use with the MONΙTOR 8 or 8W speaker
? The special dual load reflex configuration makes it possible to obtain a high level of efficiency, as well as a considerably extended low range frequency response and extremely reduced distortion.
? The ample exponential profile of the cone guarantees a linear excursion, and thus harmonic distortion at the low frequencies is reduced.
? The rear part of the 12 basket includes a finned heat sink which prevents the coil from overheating. In order to encourage air circulation
? Designed to reduce both overheating and vibration problems, the coil technology is based on a reinforced kapton support and heavy-duty adhesives (resistant up to 3000C).
? As the subwoofer range is non-directional, the unit can he situated in the most convenient place, even in a semi-hidden position.
? The MSW 8 has been designed for perfect combination with the Monitor 8, as setting this speaker unit on top of the subwoofer creates a system that is aesthetically consistent, also thanks to the uniform width. The MSW8 can also he used with the MR 5S or MR 5SW speaker.

TECHNICAL SPECIFICATIONS

SUB WOOFER

Power :

Sensitivity :

Frequency Response :

Impedance :

Maximum SPL :

Dimensions :

Weight :

LF 12?

300W

94dB 1W @ 1m

38 Hz ? 150 Hz ± 3 dB

8 Ω

120 dB

290 x 800 x 508 mm

36 kg

Weight 36.00 kg

Reviews

There are no reviews yet.

Be the first to review “RCF MSW8 – 12”

Your email address will not be published. Required fields are marked *

Quick Comparison

RCF MSW8 - 12 removeELECTRO VOICE ZX1-SUB Subwoofer 400 W removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω WHITE removeDAS AUDIO Arco 12 Sub Passive 12'' 170W 8ohms removeELECTRO VOICE ELX200-12S Passive Subwoofer 400W RMS/ 8Ω removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω BLACK remove
NameRCF MSW8 - 12 removeELECTRO VOICE ZX1-SUB Subwoofer 400 W removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω WHITE removeDAS AUDIO Arco 12 Sub Passive 12'' 170W 8ohms removeELECTRO VOICE ELX200-12S Passive Subwoofer 400W RMS/ 8Ω removeELECTRO VOICE EVID-S12.1 Passive Subwoofer 12" 200RMS/8Ω BLACK remove
Image
SKUMSW8E004423E011450Arco12SubE011431E011449
Rating
Price 638.90 incl. GR VAT 585.00 incl. GR VAT571.37 incl. GR VAT589.00 incl. GR VAT 679.00 incl. GR VAT571.37 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
12" SUBWOOFER FOR MONITOR SPEAKERS The MSW 8 is a professional subwoofer that has been expre ssly designed for use with the MONΙTOR 8 or 8W speaker ? The special dual load reflex configuration makes it possible to obtain a high level of efficiency, as well as a considerably extended low range frequency response and extremely reduced distortion. ? The ample exponential profile of the cone guarantees a linear excursion, and thus harmonic distortion at the low frequencies is reduced. ? The rear part of the 12 basket includes a finned heat sink which prevents the coil from overheating. In order to encourage air circulation ? Designed to reduce both overheating and vibration problems, the coil technology is based on a reinforced kapton support and heavy-duty adhesives (resistant up to 3000C). ? As the subwoofer range is non-directional, the unit can he situated in the most convenient place, even in a semi-hidden position. ? The MSW 8 has been designed for perfect combination with the Monitor 8, as setting this speaker unit on top of the subwoofer creates a system that is aesthetically consistent, also thanks to the uniform width. The MSW8 can also he used with the MR 5S or MR 5SW speaker.
TECHNICAL SPECIFICATIONS
SUB WOOFER Power : Sensitivity : Frequency Response : Impedance : Maximum SPL : Dimensions : Weight : LF 12? 300W 94dB 1W @ 1m 38 Hz ? 150 Hz ± 3 dB 8 Ω 120 dB 290 x 800 x 508 mm 36 kg

Passive subwoofer 12“, 400W rms, frequency response 42 - 200Hz, max SPL 127dB, 2 x balanced speakon. 19,8kg, black color.

  • 15-mm plywood enclosure, internally braced, with textured paint
  • EVS-12S 12" woofer for powerful, engaging bass response
  • Pole mount for full-range systems

 

Input Connections NL4 style (2)
Nominal Impedance 8 Ω
Frequency Response (-3 dB) 53 - 125 Hz
Frequency Response (-10 dB) 42 - 200 Hz
Sensitivity 1 W/1 m 94 dB
Max. SPL/1m (calc) 127 dB
System Power Handling (Continuous/Program/Peak) 400 / 800 / 1600 Watts
LF Transducer EVS-12S, 305 mm( 12“) Woofer
Enclosure Material 9-ply 15 mm plywood, internally braced with textured paint
Grill 16 GA steel with black powder coat
Height 400 mm (15.75“)
Width 444.5 mm (17.5“)
Depth 457.2 mm (18“)
Shipping Weight 25.4 kg (56 lbs)

 

The white Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.

Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.

12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
LF Driver 1 x 12" / 305 mm
Input Spring-loaded speaker terminals
Output Spring-loaded speaker terminals
Frequency Response 40 to 140 Hz (-10 dB)
Sensitivity 104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W)
Maximum SPL 127 dB calculated, 133 dB peak
Power Handling 800 W peak (200 W with continuous pink noise for 100 hours)
Low Impedance Yes
Nominal Impedance 8 Ohms
Dimensions (H x W x D) 16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm
Weight 39.2 lb / 17.8 kg
Features - Compact subwoofer system for installations – 12″ double coil loudspeaker – Right/Left inputs – Filtered right/left outputs – Wall mount accessory The Arco 12 Sub incorporates the new 122S dual coil 12” loudspeaker for bass reproduction which provides low frequency output to 30 Hz. The dual voice coil configuration of the loudspeaker allows the cabinet to reproduce both the left and right channel subwoofer frequencies. The Arco 12 Sub cabinet uses a band-pass configuration. The enclosure is manufactured in MDF and is available in a black paint finish. An optional mounting accessory permits wall mounting. The connector panel provides stereo inputs and high-pass filtered satellite outputs for either Arco 4 or Arco 24 systems. The Arco 12 Sub is ideal for foreground music and music/paging systems requiring bass reinforcement. Possible applications include restaurants, retail outlets, bars, music cafes, fitness centers, or any other indoor application. Technical Data
Power Handling 170 W Cont. Program/Coil
Frequency Range (-10 dB) 30 Hz-180 Hz
Nominal Impedance 8 + 8 ohms
Sensitivity 1 W/1 m 106 dB SPL
Rated Peak SPL at 1 m 134 dB
Internal Crossover In: 12dB/oct low pass 180 Hz Out: 6 dB/oct high-pass
Connectors Sping-Loaded Terminals
Enclosure Material MDF
Color/Finish Black Paint
Dimensions (H x W x D) 36 x 59.2 x 28.5 cm 14.2 x 23.3 x 11.2 in
Weight 14 kg (30.8 lb)
  • 1600 W (peak), 129 dB peak SPL utilizing high sensitivity transducer designed and engineered by EV for maximum punch.
  • High-output EVS-12L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.
  • System reliability verified with over 500 hours of abuse testing and endurance testing.
  • Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish.
  • Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.

The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category.

Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint, and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present.

EV\'s industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established as the new benchmark for toughness - both acoustically and physically; maximum efficiency with maximum toughness.

Weight Net 20.2kg (44.53 lbs)

The black Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.

Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.

12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner

LF Driver 1 x 12" / 305 mm
Input Spring-loaded speaker terminals
Output Spring-loaded speaker terminals
Frequency Response 40 to 140 Hz (-10 dB)
Sensitivity 104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W)
Maximum SPL 127 dB calculated, 133 dB peak
Power Handling 800 W peak (200 W with continuous pink noise for 100 hours)
Low Impedance Yes
Nominal Impedance 8 Ohms
Dimensions (H x W x D) 16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm
Weight 39.2 lb / 17.8 kg
Weight36.00 kg25.40 kg17.80 kg14.00 kg22.00 kg17.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 36.00 kg
Weight 25.40 kg
Weight 17.80 kg
Weight 14.00 kg
Weight 22.00 kg
Weight 17.80 kg

Recently Viewed Products