OMNITRONIC NKB-208 2WAY STAGE MONITOR 180W

• Ηχείο F.O.H / stage monitor 2 δρόμων με ειδικά διαμορφωμένη πλαστική καμπίνα υψηλής αντοχής
• bass reflex
• 90W RMS / 180W Program
• 8Ω, με 8" woofer 
• driver 1" απόκριση συχνότητας 60Hz - 18KHz
• ευαισθησία 95dB/1W/1m (112dB SPL-PEAK)
• υποδοχή τριπόδου
• ∆ιαστάσεις: (400H x 255W x 220D)
• Κατάλληλο για live/ playback, Djʼs
• Bάρος 6kg

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημείων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

50The AC18/26 is a compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive.  The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting.  The high frequency device is a 1" exit compression driver integrated into a 120° x 60° rotatable PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area.  The AC18/26 utilizes a 8" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket.  The AC18/26 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory.  The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.

Features:
1" Exit Compression Driver with 120° x 60° Coverage PT™waveguide.
8" (205 mm) LF transducer
Compact enclosure
500W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:

Frequency Range (-10 dB): 47 Hz -20 kHz
Frequency Response (±3 dB):
f10, 52 Hz - 20 kHz
f3, 63 Hz – 19 kHz
Power Rating:
250W Cont. Pink Noise
500W Program
1000W Peak
Impedance: 8 Ohms
Coverage Pattern: 120° x 60°
Dimensions: 18.5" H x 9.4" W x 10" D (469.9 x 237.5 x 254mm)
Weight: 28.2 lbs. (12.8 kg)

• 37 Hz to 18 kHz frequency range
  (-10 dB)
• 150W pink noise, 300 watts continuous program power capacity
• 110 x 85 degree coverage with rotatable horn
• 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
• 8 Ohm Bypass
• Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
• Available in black or white (Control 29AV-WH)
• Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
• Net Weight: 12.2 kg (26.8 lb)

Key Features:
- Compact enclosure
- 205 mm (8 in) LF transducer
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm
(1 in) exit compression driver
- Dual Neutrik NL4 connectors plus
screw terminals
- Multiple Attachment Points for Ultimate
Flexibility
 
Specifications:
System:
Frequency Range (-10 dB): 52 Hz - 20 kHz
Frequency Response (+/-3 dB): 63 Hz - 19 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 9 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 93 SPL dB/1W/1m
Rated Maximum SPL (1m)2: 117 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 250 W / 500 W / 1000 W
AES Standard Power Rating4: 375 W
Crossover: 2.1 kHz
Transducers:
Low Frequency Driver: 1 x JBL 228H, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5
in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (Field Rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M6 rear for OmniMount® 30.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental
ratings, use WRC or WRX.
Dimensions (H x W x D): 469.9 x 237.5 x 254.0 mm
(18.5 x 9.4 x 10.0 in)
Weight: 12.8 kg (28.2 lb)

The P3108 is a weatherproof full range, wide-dispersion, two way loudspeaker system for offering substantial power and efficiecny for a variety of professional indoor or outdoor applications.

The high frequency section is a constant directivity CMD horn loaded with a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 8” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, full UV protected. The cabinet is equipped 4xM8 brass inserts and stainless steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P 3108 is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).