AKG MPA V L Phantom Power Adapter

73.82 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: MPA V L Category:
The AKG MPA V L Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. This product replaces the AKG MPA III L Phantom Power Adapter, which did not have a bass roll-off switch.

 

Read more

The AKG MPA V L Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. This product replaces the AKG MPA III L Phantom Power Adapter, which did not have a bass roll-off switch.

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “AKG MPA V L Phantom Power Adapter”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG MPA V L Phantom Power Adapter removeShure MX-1BP Battery Phantom Power Preamplifier removeSENNHEISER K-6P PHANTOM POWER ONLY MODULE removeRADIAL StageBug SB-48 Phantom Power Supply removeMillenium Pocket Phantom Power Supply for Condenser Microphones removeMACKIE M48 PHANTOM POWER SUPPLY 48V remove
NameAKG MPA V L Phantom Power Adapter removeShure MX-1BP Battery Phantom Power Preamplifier removeSENNHEISER K-6P PHANTOM POWER ONLY MODULE removeRADIAL StageBug SB-48 Phantom Power Supply removeMillenium Pocket Phantom Power Supply for Condenser Microphones removeMACKIE M48 PHANTOM POWER SUPPLY 48V remove
ImageMillenium pocket phantom power
SKUMPA V LMX1BPH10SE00026H30RL00006POCKETPHANTOM149.279
Rating
Price 73.82 incl. GR VAT 172.00 incl. GR VAT 185.00 incl. GR VAT 189.00 incl. GR VAT 47.89 incl. GR VAT 59.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The AKG MPA V L Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. This product replaces the AKG MPA III L Phantom Power Adapter, which did not have a bass roll-off switch.

The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector

The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.

Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case

Technical Data
Nominal impedance  200 Ohm, symm. 
Min. terminating impedance  1000 Ohm 
Output voltage  2 V (1 kHz) 
Power supply  Phantom 12 - 48 V 
Current consumption  2,2 mA 
Dimensions  d 22 x 52 mm (netto) 
Gain  0 dB 

The Radial SB-48 is a high performance phantom power generator that employs a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. The stereo design features XLR inputs and outputs with a choice of 48V and 12V operation. The SB-48 is powered by a single 15VDC 400 milliamp supply that is included. The connector may be locked into place using a retention clamp. As with all Radial products, the SB-48 is manufactured in Canada from solid steel and powder coated for years of great looks!

  • 2 channels
  • 2 XLR inputs
  • 2 XLR outputs
  • Switch for +12 V or +48 V
  • Including power supply

48 V Phantom Power Supply

    With XLR input and output
    Transparent, quiet operation
    Powered via power supply unit (included) or optional 9V battery
    Displays power and battery status


Weight0.10 kg0.40 kg0.50 kg7.30 kg0.6 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.40 kg
Weight 0.50 kg
Weight 7.30 kg
Weight 0.6 kg
Weight 1.00 kg

Recently Viewed Products