PRESONUS TEMBLOR T-8 Active subwoofer 100W

Original price was: €364.00.Current price is: €331.07. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4″ TRS and RCA main inputs, and 1/4″ TRS and RCA pass-through outputs to connect your top speakers. The speaker also includes a continuously variable […]

 

Read more

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4″ TRS and RCA main inputs, and 1/4″ TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications

Inputs 2x Balanced 1/4″ TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼” TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz – 200 Hz
Low Pass Filter 50 – 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8″ glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0″ (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     

Weight 19.00 kg

Reviews

There are no reviews yet.

Be the first to review “PRESONUS TEMBLOR T-8 Active subwoofer 100W”

Your email address will not be published. Required fields are marked *

Quick Comparison

PRESONUS TEMBLOR T-8 Active subwoofer 100W removeGENELEC 7070A ACTIVE SUBWOOFER removeDYNAUDIO 9S Active Studio Subwoofer (Piece) removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeFOCAL Sub6 ACTIVE STUDIO SUB MONITOR 300W removeEVE AUDIO TS107 ACTIVE 6.5'' SUBWOOFER 100W RMS remove
NamePRESONUS TEMBLOR T-8 Active subwoofer 100W removeGENELEC 7070A ACTIVE SUBWOOFER removeDYNAUDIO 9S Active Studio Subwoofer (Piece) removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeFOCAL Sub6 ACTIVE STUDIO SUB MONITOR 300W removeEVE AUDIO TS107 ACTIVE 6.5'' SUBWOOFER 100W RMS remove
Image
SKUTemblor T-87070AH00DY00020SE7261ASub6TS107
Rating
Price Original price was: €364.00.Current price is: €331.07. incl. GR VAT Original price was: €2,728.00.Current price is: €2,440.67. incl. GR VAT Original price was: €1,077.00.Current price is: €969.00. incl. GR VAT Original price was: €2,492.40.Current price is: €2,225.94. incl. GR VAT Original price was: €1,612.00.Current price is: €1,295.00. incl. GR VAT Original price was: €518.32.Current price is: €499.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications
Inputs 2x Balanced 1/4" TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz - 200 Hz
Low Pass Filter 50 - 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8" glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0" (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     

Genelec 7070A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.

112 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
12" Active
250 W
H x W x D  625 x 555 x 490 mm
50 Kg (110 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

Dynaudio 9S, Active Subwoofer 24 cm (9.5“) Woofer, 300 Watt Class-D Amp, Frequency Range: 22 Hz - 175 kHz (+/- 3dB), 37 mm front baffle, Master/Slave Function, adjustable Lowpass Filter, Connections: XLR, SAT output with defeat-able highpass filter, Auto On/Off Function.

Dimensions: 266 x 320 x 276 mm, Weight: 10.5 kg

Type: Studio Monitor Subwoofer
Woofer: 9.5" long-throw MSP
Amplifiers Power: 300W Class-D
Input/Output Plugs: XLR Balanced
Frequency Response: 22-250Hz +/- 3dB
Dimensions (W x H x D): 266 x 276 x 320 mm
Weight: 10.5 kg

Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.

The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.

The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.

108 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
GLM tone controls
10“
120 W
H x W x D  527 x 462 x 363 mm
27 Kg (59 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.

 

Specifications
Frequency response : 30Hz - 250Hz
Maximum SPL : 116dB SPL (peak @ 1m)

Input :

Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable

Outputs (towards speakers) : Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug

Amplification :

350W rms, BASH® technology

Signal internal treatment :

Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave

Electric supply :

Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass

warning light : Power on LED, Subwoofer switch (mute), Released high-pass

Electric supply :

Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire

Subwoofer : 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body.

Dimensions (HxWxD) : 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm)
Weight : 50.7lb (23kg)

 

7" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS107 is the smallest model in the range of EVE Audio subwoofers and features a very efficient 100W PWM amplifier that drives a proprietary 6.5" woofer. This guarantees a frequency response of down to 36Hz up to 300 Hz, for a maximum output power of 102 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS107
Description Subwoofer
Dimensions (WxHxD) [mm] 230 x 355 x 300
Dimensions (WxHxD) [“] 9.06 x 13.98 x 11.81
Free-field frequency range (-3dB) 36Hz - 300Hz
Woofer 165mm/6.5“
Maximum SPL @ 1m 102dB
Number of amplifiers 1
Total short-term output power 100W
Protection limiter YES
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch YES
Filter-lock dip switch YES
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 120VA
Misc.
Weight kg/lb. 8.2 / 18.1
Weight19.00 kg50.00 kg10.50 kg27.00 kg23.00 kg8.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.00 kg
Weight 50.00 kg
Weight 10.50 kg
Weight 27.00 kg
Weight 23.00 kg
Weight 8.20 kg

Recently Viewed Products