PRESONUS TEMBLOR T-8 Active subwoofer 100W

331.07 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4″ TRS and RCA main inputs, and 1/4″ TRS and RCA pass-through outputs to connect your top speakers. The speaker also includes a continuously variable […]

 

Read more

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4″ TRS and RCA main inputs, and 1/4″ TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications

Inputs 2x Balanced 1/4″ TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼” TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz – 200 Hz
Low Pass Filter 50 – 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8″ glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0″ (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     

Weight 19.00 kg

Reviews

There are no reviews yet.

Be the first to review “PRESONUS TEMBLOR T-8 Active subwoofer 100W”

Your email address will not be published. Required fields are marked *

Quick Comparison

PRESONUS TEMBLOR T-8 Active subwoofer 100W removeYAMAHA HS-8-S Powered 8'' Studio Subwoofer removeEVE AUDIO TS108 ACTIVE 8'' SUBWOOFER 150W RMS removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -BLACK- removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (RED) removeJBL LSR 310S Bi-Amplified Powered Studio Monitor Sub remove
NamePRESONUS TEMBLOR T-8 Active subwoofer 100W removeYAMAHA HS-8-S Powered 8'' Studio Subwoofer removeEVE AUDIO TS108 ACTIVE 8'' SUBWOOFER 150W RMS removeMONKEY BANANA TURBO 10s ACTIVE STUDIO SUB 300W -BLACK- removeMONKEY BANANA Gibbon 10' Bi-Amp Sub studio monitor 300W (RED) removeJBL LSR 310S Bi-Amplified Powered Studio Monitor Sub remove
Image
SKUTemblor T-8H000.00134TS108TURBO 10S BLACKGibbon 10RLSR 310S
Rating
Price 331.07 incl. GR VAT 555.00 incl. GR VAT 699.00 incl. GR VAT711.75 incl. GR VAT465.00 incl. GR VAT 522.99 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications
Inputs 2x Balanced 1/4" TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz - 200 Hz
Low Pass Filter 50 - 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8" glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0" (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     
  • 8' bass-reflex powered subwoofer delivers low frequencies down to 22Hz
  • 22Hz - 150Hz frequency response
  • High-power 150W amplifier exclusively designed for low frequencies
  • LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
  • PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
  • XLR and TRS phone for outputs and XLR for L and R and EXT SUB
Type Studio monitor subwoofer
Woofer 8''
Midrange -
Tweeter -
Amplifiers Power 150W
Input/Output Plugs XLR3-31 type (balanced) x2, PHONE (balanced) x2 / Out: XLR3-32 type (balanced) x2 (L&R)
Frequency Response 22Hz - 160Hz
Εqualizer Yes (Low cut switch)
Dimensions (W x H x D) 300mmx350mmx389mm
Weight 12.5kg

8" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS108 model features a very efficient 150W PWM amplifier that drives a proprietary 8" woofer. This guarantees a frequency response of down to 33Hz (on the lower end), up to 300Hz, for a maximum output power of 105 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS108
Description Subwoofer
Dimensions (WxHxD) [mm] 280 x 415 x 365
Dimensions (WxHxD) [“] 11.02 x 16.34 x 14.37
Free-field frequency range (-3dB) 33Hz - 300Hz
Woofer 195mm/8“
Maximum SPL @ 1m 105dB
Number of amplifiers 1
Total short-term output power 150W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 170VA
Misc.
Weight kg/lb. 11.5 / 25.3

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

Product details

Woofer:10-inch black Glass-Composite Cone
Frequency response:20Hz - 200Hz
Crossover frequency:50Hz - 130Hz adjustable
Amplifier Power:300W
S/N Ratio (A weighted):>95dB
THD + N @ Rated Power:  0.08%
Inputs:2x XLR, 2x TRS, 2x RCA Connectors
Outputs:2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors
Input Impedance:20 kOhm balanced, 10 kOhm unbalanced
Phase reverse:0 / 180° switch
Ground Lift switch:On / Off
Bypass Footswitch:On / Off
Available colors:Red, Black
Net weight:17.6kg / 38.7lb
Net Dimensions: L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in

Beef up your studio's low-end response

The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113dB.

A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.

JBL LSR 310S Features:
  • 200W Class-D Amplifier
  • 113dB Peak Output
  • 10" Speaker
  • Slip Stream Bass Port
  • Balanced XLR Input
  • Extended Low Frequency Effects
  • 3 Selectable Crossover Settings

 

Weight19.00 kg12.50 kg11.50 kg22.40 kg8.00 kg15.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.00 kg
Weight 12.50 kg
Weight 11.50 kg
Weight 22.40 kg
Weight 8.00 kg
Weight 15.60 kg