Content |
System type : active vented enclosure subwoofer
Amplifier Continuous Power : 200 W
Frequency response : 40 Hz - 160 Hz
Low Frequency Device : 15'' woofer
Crossover Frequency : 160 Hz, 12 dB/oct. LP - 6 dB/oct. HP
Power Supply : 230 VAC 50 Hz or 117 VAC 60 Hz
Maximum Power Consumption : 510 VA
Connectors : IN: 2 x jack 1/4''
OUT: 2 x jack 1/4''
Construction : 18 mm MDF
Finishing : anti-scratch finish
Mounting Pole : 1 x top
Weight : 31 kg(68.355lb )
Dimensions (W x H x D) : 46.5 x 55 x 48 cm
Controls : volume, gnd. lift
|
- Powered 2.1 PA with 15" subwoofer and two 8" satellites
- Total power: 2060 W
- Integrated 6-channel mixer with EQ and reverb
- Selectable input for microphone, Hi-Z or Line
- Digital SPDIF TOSLINK stereo input
- Wireless streaming via Bluetooth
- Homogeneous dispersion thanks to newly developed waveguides
- DynX® DSP for distortion-free sound reproduction
- Selectable presets depending on the setup (stereo / cluster mode)
- Durable polyurea coating for subwoofer and satellites
General
Product type
PA Complete Systems
System output (RMS)
1030 W
System output (Peak)
2060 W
Max. SPL (Avarage)
124 dB
Frequency response (-10dB)
33 - 20000 Hz
Crossover frequency
105 Hz
Dispersion (H x V)
90° x 30 °
Subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Multiplex, 18 mm Multiplex
Subwoofer features
3 Reverb presets, 6 channel mixer, Bluetooth, Cluster / Stereo Preset, M20, SPDIF
Mid/Hi System
Midrange dimensions (mm)
203.2 mm
Midrange brand
Custom-made
Midrange voice coil
1.5 "
Midrange voice coil
38.6 mm
Tweeter dimensions
2 x 0.5 "
Tweeter dimensions (mm)
2 x 12.7 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Mid/Hi system speaker connections
1
Mid/Hi system speaker connections
Speakon compatible
Cabinet construction mid/high
Bass Reflex
Carrying Handles Mid / Hi System
1
Mid/Hi system cabinet material
12 mm Multiplex, 15 mm Multiplex
Mid/Hi system cabinet surface
Polyurea
Mid/Hi system width
275 mm
Mid/Hi system height
470 mm
Mid/Hi system depth
260 mm
Mid/Hi system weight
9.7 kg
Mid/Hi system features
Dual - Tilt flange, Midrange Waveguide
Amplifier module (integrated in subwoofer)
Amplifier output subwoofer (RMS)
500 W
Amplifier Output Mid/Hi (RMS)
2 x 265 W
Protection circuits
limiter, overload, short circuit
Operating Temperature
0°C - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
Input type, Input volume, Low / High EQ, Main volume, Power, Reverb, Stereo / Cluster mode, Sub / High level
Indicators
Limit, Power, Protect, Signal
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Multi input
2 x switchable (MIC, LINE, HI-Z)
Multi input connector
Combo XLR
Line input connectors
Combo XLR, RCA
Digital input connectors
SPDIF
Speaker output connections
Speakon compatible
Bluetooth Audio Decoder
SBC
| The Italian Stage S115A 15" Active Subwoofer is ideal for adding powerful yet smooth bass to your live setup. It uses a 15" woofer driven by a 350W RMS class AB amplifier, resulting in 128 peak spl and a 20Hz to 120Hz frequency range. This results in a booming bass sound, that matches precise performance with a punchy sound. The S118A also has a control panel section, with controls for line level, a phase switch, crossover switch - activating a high pass filter for outputs - as well as ground switch.
manufacturer |
ITALIAN STAGE |
Warranty |
2 Years |
Speaker Category |
SubWoofer |
Speaker Type |
Active |
Material of manufacture |
Wood Cabin |
Total Power (Watt) |
350 |
Woofer diameter (inches) |
15 |
dB (max spl) |
128 |
Weight (kg) |
22.5 |
Frequency response (Hz) |
20 to 120 |
Colour |
Black |
|
Description
The all-new DXS15 subwoofer delivers powerful yet focused low end reaching as low as 42Hz. The DXS’s fully optimized band-pass design combines with its powerful Class-D amplifier, long-travel 15” woofer, and formidable DSP to deliver a tight, impressive bass with outstanding depth and high power output.
Features:
- Speaker type: 15" powered subwoofer, Band-pass type
- Frequency range: (-10dB) 45Hz - 160Hz
- Diameter: 15" cone
- Voice Coil: 2.5“
- Output power: Dynamic:950W / Continuous: 600W
- I/O connectors INPUT: XLR-3-31 x2
- I/O connectors THRU: XLR3-32 x 2(Parallel with INPUT)
- Power requirements: 100V - 240V, 50Hz/60Hz
- Power consumption: 120W
- Pole socket: 35mm (Top x1)
- Dimensions (WxHxD): 478mm x 618mm x 624mm
- Net weight: 38.0kg (83.8lbs)
- Others Material: Wood (Paint, Black)
| LD Systems ICOA SUB 15 A Powered 15" Bass Reflex PA Subwoofer
Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 400-watt RMS or 1600-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you're a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
Product type
PA subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
76.5 mm
Frequency response (-10dB)
36Hz Preset depending
Protection circuits
Excursion Limiter, over voltage, over-current, Peak Limiter, RMS Limiter, thermal overload
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line output connectors
XLR
Operating voltage
100 - 240 V
Power consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
|
Are you looking for a deep and punchy bass in a small pack?
The choice is easy: ART 905-AS.
It is an extremely compact and easy to transport high power active subwoofer, just a bit larger than the 902-AS in order to take the newly designed 15” neodymium woofer for a deeper bass punch.
The cabinet is made in Baltic Birch and heavy duty painted.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | Max SPL: | 131 dB | | Woofer: | 15“, 3" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Stereo combo xlr-jak | | Output connectors: | Stereo xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 80 - 120 Hz | | Protections: | Thermal, rms | | Limiter: | Limiter | | Controls: | Volume, phase, xover | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 1000 Watts | | Low frequencies: | 1000 Watts | | Cooling: | Convection / forced | | Connections: | VDE connector in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 445 / 17.51 mm/inch | | Depth: | 600 / 23.62 mm/inch | | Net Weight: | 34 / 74.95 Kg/Lbs |
|
Reviews
There are no reviews yet.