Content | The HCM23 is a ?exible miniature microphone with a simple, fast and comfortable headset system The double vent protection system of the HCM23 makes it ideal for use in theatre and spoken word applications The very small size and the super lightweight provides a comfortable and secure ?t when a discreet, minimum visibility microphone is required Available with 3 different connectors for use with most professional wireless systems currently available
Features
5 mm permanently polarized condenser capsule
Omni-directional polar pattern
Fixed bi-aural headband
Anti-pop screen
Available Connectors: 3.5mm plug (HCM23SE) 3-pin mini XLR (HCM23AK) 4-pin mini XLR (HCM23)
TECHNICAL SHEET
Transducer type: Back electret condenser
Polar pattern: Omni-directional
Frequency response: 20Hz- 20KHz
Sensitivity: -45dB± 3dB
S/N Ratio: >70dB
Nominal Impedance: 1500?± 30%
Power Supply: 1.5V-10V
Colour: Skin
Dimension: Ø5mm
Accessories: Windscreen | Headset Mikrofon for WS 100 Series, WS 1000 Series, WS 1616 Series and WS ECO Series
- Uni-directional Electret Condenser Headset Microphone
- Impedance
- Frequency range : 20Hz - 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Headsets
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
Foam windscreen
Weight
0,06 kg |
Shure WBH53T Tan Headworn Condenser Microphone
Features of the Shure WBH53 Headworn Microphone:
? Comfortable, latex-free Dynaflex? earforms that hide behind the ears
? Thin, non-reflective wireframe that is easily hidden underneath hair
? Ultra-thin detachable microphone boom mount for right or left positioning
? Interchangeable frequency response caps (mild or high, two pieces each)
? Two foam windscreens included
? Clothing clip for securing cable
? Corrosion resistant
? Easy to clean
? Durable carrying case for protective storage
? Available in either black or tan
? Available with either TA4F connectors or tinned leads (no connector) for full wireless system compatibility
|
High-quality permanently polarized condenser headmic with omni-directional pick-up pattern
Τype: | Headset | Series Compatibility: | 3000/5000 Series |
| Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
Type |
Pre-polarized condenser microphone |
Polar pattern |
cardioid |
Frequency range |
20 Hz to 20,000 Hz |
Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
Equivalent noise level (IEC 60268-4) |
22 dB-A |
Impedance |
200 ohms, electronically balanced |
Recommended load impedance |
>2000 ohms |
Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
Powering |
approx. 2 mA |
Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
Cable |
1.5 m (5 ft.) |
Finish |
matte black |
Dimensions |
130 mm (5.2 in.) in dia. |
Net weight |
30 g (1.1 oz.) exc. of connector |
Shipping weight |
200 g / 7.1 oz. |
|
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g)
|
Reviews
There are no reviews yet.