| Content |
The JBL JRX125 is a dual 15? speaker system, which has become one of the most popular configurations with DJs and musicians who are looking for more low-frequency performance while maintaining the simplicity of a single-box system. The JRX125 is actually a ?quasi three-way? design. This means that the upper woofer covers lows and mids. The bottom woofer uses a lower crossover frequency and covers only lows, acting as a built-in subwoofer. So you get the extra low-end of a dual 15? rig while maintaining the superior mid-frequency performance of a single driver system. Dimensions: 43.25 x 18.25 x 17“, 94 lbs (42.6 kg).
JBL designed the new JRX100 series for cost-conscious musicians, DJs and other users of live sound reinforcement speakers. All full-range models feature Neutrik? Speakon? and 1/4" input connectors. JRX100 cabinets are constructed of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To minimize distortion, heavy gauge wire is used for inductors and SonicGuard? high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. The JRX115 and JRX112M's innovative, new dual-angle pole socket allows them to be mounted in either a conventional, vertical position, or with a 10 degree down angle. By aiming the speaker down, you get more even audience coverage and reduce the destructive acoustic reflections from walls. JBL constructs the JRX enclosures with advanced adhesives and closely mechanically spaced fasteners, not just glue. They use non-resonant, all metal handles, and an 18-gauge, full metal grille. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.
- System Type: Dual 15" 2-way, sound reinforcement speaker
- Frequency Range (-10 dB):2 35 Hz - 16 kHz
- Frequency Response (±3 dB):2 45 Hz - 12 kHz
- Sensitivity (1w/1m): 100 dB SPL
- Nominal Impedance: 4
- Peak Power Capacity: 2000 watts
- Maximum SPL: 133 dB
- Nominal Dispersion: 90° x 50°
- Crossover Frequency: 2 kHz
- Dimensions (H x W x D): 43 in x 18.3 in x 17 in
- High Frequency Driver: JBL 2412, 1" exit compression driver mounted on Progressive
- Transition™ Waveguide
- Low Frequency Driver: JBL M115-8A x 2
Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel. - Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet.
- Grill: 18-gauge, powder-coated steel.
|
- High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
- Available in black or white finish
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning:
- -Stand mounting with 35-mm pole socket
- -Tilts on its side for use as a floor monitor
- Optional swiveling mounting brackets
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1⁄4'' jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in our wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.
Triumphant transducers
Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.
Big sound, lightweight, low price
Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?
Get on the stick…or get on down
The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.
But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.
Choose white, black, on or off the wall…
You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!
|
Club Series V
Gigging bands, mobile DJs and houses of worship have helped make the first four generations of Yamaha Club Series Speakers incredibly popular. The refinements of generation V continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual Speakon® and ¼" connectors. Once again, with professional features, excellent sonic performance and great value, Club Series loudspeakers deliver premium quality night after night.
Yamaha has a long history of both making and reproducing music. The Club series V loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve.
Built in the United States, these loudspeakers are designed to provide years of service. high power handling and excellent response have made Club Series loudspeakers the perfect choice for more than 16 years. Whether playing in a band, DJing, orupgrading the sound system at your church or school, with an expanded lineup of over twenty models to choose from, you're sure to find the right loudspeaker. Have a look at what goes into their construction -- Cabinets are constructed of high quality particleboard, chosen for its high strength and elasticity, consistent void free makeup and light weight. Another great benefit of this material is its environmental friendliness. Made from southern yellow pine, this material is both abundant and quickly renewable. Accurate CNC routing machines are used to cut every part, assuring consistency with tolerances of one ten thousandth of an inch. Skilled technicians assemble each cabinet by hand, rejecting any defects. Whether covered in durable carpet or the elastomeric spray coating, heavy steel handles and sturdy pole sockets make moving and positioning easy.
The drivers, or speakers in these cabinets, are custom made my Eminence Speaker Corporation® to Yamaha's exacting tolerances. Woofers share design features like high strength curvilinear cones and Dupont KaptonTM voice coil formers. Oxygen-free copper voice coils and oversize strontium ferrite magnets are also used to provide high power handling and long life. The 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex and help dissipate heat. The compression driver that generates the high frequency sound uses a pure titanium diaphragm. This 2" dome is one of the largest in its class, allowing for very high output and low distortion, without the aid of cooling fluids. It's mated to a 90° x 40° custom designed CD (constant directivity) horn with excellent dispersion and response.
Crossover networks that divide the signal going to the woofer and compression driver are constructed with oversized coils, high voltage capacitors, and power resistors designed to provide the best possible sound quality and minimize loss. Overload protection is also included to protect the components.
Connections on these loudspeakers are dual Neutrik Speakon® ¼ jacks for the highest possible strength and current capacity. Two of each connector makes it easy to "daisy chain," or add speakers.
Club V loudspeakers with the C prefix are coated with a heavy-duty elastomeric spray coating. Designed as an installation alternative to the carpeted S versions, they can easily fit any decor. The finish is very tough, and readily paintable to match surroundings. The steel grilles are foam-lined with acoustically transparent material to provide a more subdued appearance.
C215V
Two 15" cast frame woofers
2000-watt peak power handling
90 x 45 degree CD horn
Perfect where high sound pressure levels are required
Features:
- Tough, paintable exterior coating
- Dual cast-frame 15" drivers
- Frequency response: (-10dB) 42Hz - 16kHz
- 1,000W program handling, 2,000W peak
- Sensitivity: 99dB
- 20“W x 46“H x 24“D
- 101 lbs.
| | | Woofer | Tweeter
(diaphragm) | Freq
Resp
(-10dB) | Power
Handling
(noise 1 /
program/peak) | Sen-
sitivity | Max.
SPL 3 | Dims.
(WxHxD) 2 | Wt. 2
(lbs) |
| 15" (2) | 2" titanium | 42Hz-
16kHz | 500/1000/2000 | 99dB | 132dB | 20x46x24 | 101.0 |
|
|
Description:
The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.
Applications:
Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs
Features:
Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction
Weight: 67 kg
|
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18 |
Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.
Product Specifications - Enclosure: Sealed type
- Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
- Rated Impedance: 8 Ω
- Sensitivity: 98 dB (1 W, 1 m)
- Frequency Response: 70 - 20,000 Hz
- Crossover Frequency: 3 kHz
- Directivity Angle: Horizontal: 90゜, Vertical: 40゜
- Speaker Component: Low frequency: 38 cm (15) cone-type
- Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
- Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
- Finish: Enclosure: Polypropylene, White
- Punched net: Surface-treated steel plate, White
- Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
- Weight: 12 kg (26.46 lb)
|
Reviews
There are no reviews yet.