Symetrix 425 Dual Compressor-Limiter USED (Made in USA)

PRICE DOES NOT INCLUDE VAT

Symetrix 425 Dual Compressor-Limiter-2nd Hand-

Specifications

Input/Output
Inputs XLR-female, >30-kilohms line-level balanced bridging, >30-kilohms
unbalanced bridging.
TRS-female paralleled with XLR connector.
Outputs 300-ohm source impedance, balanced. XLR-male
TRS-female wired tip hot, ring & sleeve grounded (unbalanced), 150-
ohm source impedance.
Maximum input level +20 dBu, balanced
Maximum output level (onset
of clipping/1% THD)
+25 dBu balanced
+23 dBm balanced (600 ohms)
+20 dBu unbalanced
+18 dBm unbalanced (600 ohms)
Sidechain 100-ohm source impedance, 6800-ohm input impedance.
TRS jack, tip is return.
Compressor
Type RMS responding, soft-knee
Attack time 2ms
Release time 180ms to 2.5s long term
Auto-release time 20ms to 1s (based on 20ms tone burst)
Threshold -40 dBu to +20dBu (bypass)
Ratio 1:1 to 10:1
Limiter
Attack time 200μs
Release time 100ms
Threshold -10dBu to +20dBu
Ratio 20:1
Downward Expander
Attack time 4ms
Release time 250ms to 5s
Threshold 0dBu to -40dBu (bypass)
Ratio 1:1.5
Rev 2.0, 10/29/93 12-1
Performance Data
Frequency Response +0, -3 dB 10_Hz to 60 kHz
Distortion (THD) .04 %, +4 dBu in, +4 dBu out, 10 dB gain reduction, 1 kHz, 30
kHz low-pass filter
.01 %, +4 dBu in, +4 dBu out, 10 dB gain reduction, 20 kHz,
30 kHz low-pass filter
.02 %, +18 dBu output, 0 gain reduction, 20-20 kHz, 30 kHz
low-pass filter
Crosstalk -95 db @ 1k, -95 dB @ 10k, + 4dBu in, remaining channel
terminated in 600 ohms, 20k rolloff in analyzer.
Dynamic Range 115 dB (difference of maximum output and noise floor)
Input CMRR greater than 40 dB @ 1kHz
Output Noise -90 dBu, measured at balanced output, input terminated in
600 ohms, 20 kHz rolloff in analyzer.
Physical
Connectors input: XLR-3F, 1/4" TRS
output: XLR-3M, 1/4" TRS
sidechain: 1/4" TRS (one)
Polarity pin 2 of XLR is hot, tip of TRS jacks is hot.
Size (hwd), in & cm 1.75 x 19 x 7.25 in
4.44 x 48.3 x 18.4 cm
Weight, lbs & kg 8 lbs (3.63kg) net
11 lbs (4.6kg) shipping
Electrical
Approvals Listed by Underwriters Laboratories, Inc. Control number
2T38.
Power requirements 117V AC nominal, 105-125VAC 50-60 Hz, 12.5 Watts
maximum
230V AC nominal, 205-253V AC 50 Hz, 12.5 Watts maximum

PRICE DOES NOT INCLUDE VAT

AKG N63E Phantom Power Supply

PRICE DOES NOT INCLUDE VAT

Peavey EQ-215 Stereo Vintage (Used)

• 15 frequency bands stereo equalizer
• External condition: mediocre (scratches,one fader knob missing)
  
• Works perfectly
• Made in U.S.A.
• Price does not include V.A.T.

DEMO PIECE IN VERY GOOD CONDITION

COMES IN ORIGINAL PACKAGE WILL ALL CABLES/MANUALS STILL SEALED!

The Quantum II is your studio\'s secret to success, delivering a fully professional master every time. You get sample rates up to 96kHz , a true, 48-bit digital signal path, and legendary dbx dynamics processing in a 4-band multiband system. The 4-way crossover splits the signal into 4-bands, and each band may be individually gated, compressed, and limited. The intuitive user interface puts all the mastering processes you need right at your fingertips.

A quick surf through the menu driven system gives you a glimpse of the packed feature set. But what really makes the Quantum II a giant in the field of dynamics processing is the dbx Type IV Conversion System. This lets you capture the character of any analog signal to the digital domain, retaining the original warmth of the sound yet allowing you the precision and accuracy you need in today\'s digital world.

• 96 kHz, 24 bit A/D, D/A, and Digital I/O on AES/EBU or S/PDIF
• 48 bit internal signal path for increased head room and low level resolution
• Patented TYPE IV™ A/D Conversion system with TSE™
• 4 band stereo compressor-gate-limiter
• 5 band EQ - Hi and Lo shelves, 3 band fully parametric and MS EQ
• Normalizer - lets you control overall signal dynamics
• Stereo adjust - control your stereo image
• Sync input/output using dbx\'s ownproprietary clock chips for extremely low jitter sync
• Dither outputs to 16, 20, or 24 bits
• Sample rate conversion - Fill Up/Down
• Software updateable via Internet and MIDI and RS 232
• 4 band crossover with variable slopes
• GUI Control

PRICE WITHOUT VAT 24%

PRICE DOES NOT INCLUDE VAT

Art + Science = Magic

The Engineering Group at TC Electronic were given carte blanche to create the optimal studio
signal processor. Being musicians and studio engineers themselves, they know what is important
and have a feel for what you are looking for. Working on the borderline between art and science,
they created the M2000.
Designed for the artist within you, you will create magic when using the M2000.

Main features  

Magic
The M2000 provides you with a broad palette of high quality effects enabling you to
create magical effects. The true dual engine configuration allows you to run two full-
blown effects simultaneously, i.e. on two individual effects sends. The effects have
been developed for optimal sonic quality with no compromises made. This has only
been possible because our engineers succeeded in combining the latest technology
with TC's powerful DARC? chip.

Ultimate User-Interface
The user-friendly TC feature, the Recall Wizard, instantly finds the preset that suits
your need in any situation. You simply enter your preferences, such as gentle reverb
for vocal, or extra pitch for guitar and the Wizard serves you a short list of presets ready
to compare and use.

Uncompromising Effects
The M2000 gives you access to a stunning array of Reverb, Pitch-shifting, Delays, Chorus,
Dynamics etc. Among the included reverbs you?ll find the unique Co-efficient Optimized
Room Emulator or C.O.R.E. Reverb? based upon TC?s famous reverberation Technology.
Another unique feature in the M2000 is the Dynamic Morphing. This function enables you to
apply e.g. Chorus to a vocal at low volume levels, while the same effect is being morphed into
flanging at high levels giving the signal a totally new dynamic dimension.

The Sensation
The M2000 is fully prepared for the digital age with Digital I/O connectors, S/PDIF and the
professional format AES/EBU. However, specifications never tell the whole story. What really
matters is how your final mix sounds. This is where TC?s long experience and know-how in high-end
studio signal processing becomes important.

More Features

250 factory presets, including Delay, Reverb, Ambience, Pitch, Dynamics, EQ + more.
True stereo Twin Engine processing with six different routings available.
Dynamic Morphing? and Patch Glide with adjustable glide times.
20bit Analog Conversion (105dB Dynamic Range A to D): 10Hz-20Khz bandwidth
AES/EBU (24bit) and SPDIF (24bit) digital I/O. + 16bit dithering tool for DAT output.
Wizard Help menus assist user in preset choices on an easy to read scrolling bit-mapped display.
Tap tempo and MIDI tempo Delay presets. Tap tempo button and footswitch jack.
Both 128 user and 128 Combi-user presets + 4 snapshot memories.
Universal auto-switching power supply (100-240V.)