| Content |
LD Systems Stinger MON121AG2 The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications. The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz. ![ldmon121ag2f2_01]( "ldmon121ag2f2_01") Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting. The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function. The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°. - Type: active
- Woofer size: 12“
- Woofer size: 304 mm
- Woofer type: coaxial speaker
- Woofer magnet: ferrite
- Woofer brand: custom made
- Woofer voice coil: 2
- Woofer voice coil: 50.8 mm
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: custom made
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class A / B
- Dispersion angle (H x V): 75° x 75°
- Power output (RMS): 250 W
- Power output (peak): 500 W
- Frequency response: 80 Hz - 20 kHz
- Crossover frequency: 2200 Hz
- SPL (1 W/1 m): 100 dB
- Max. SPL (continuous): 116 dB
- Max. SPL (peak): 124 dB
- Protection: limiter, short-circuit
- Controls: Volume, On / Off
- Indicators: Power, Signal, Limit
- Number of line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Number of line outputs: 1
- Line output connectors: XLR
- Power supply: transformer
- Operating voltage: 230 V AC / 50-60 Hz
- Cabinet material: 15 mm plywood
- Cabinet type: bass reflex
- Monitor angle: 35°
- Width: 440 mm
- Depth: 360 mm
- Height: 514 mm
- Features: Ergonomic insert handles
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS
Cabinet Specs
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Size/Weight
Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs |
The DVX DM15 is a low-profi le stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that require powerful low-end performance without added subwoofers. It sports a high-performance 15" neodymium woofer and a 1.4" neodymium compression driver, coupled to an aluminum" CD horn. This combinationʼs response across the human voiceʼs full range is impressively assertive.
Paired with high-output digipro digital power amps in a bi-amped confi guration,
theDVX DM15belies its unobtrusive look with performance that is far from understated, delivering plenty of power to cover midsized to large stages.
| The self-powered KD12 is an uncompromising monitor and fullrange speaker - all-in-one. The KD12 delivers advanced sonic clarity and top performance. Whether as stage monitor, fullrange speaker, frontfill for larger stages or as delay speaker: The KD12 is the ideal allround solution for the up-market user.
Features
► High-class performance in ultra-lightweight design (14 kg only)
► 1.000 W Class D bi-amped power module
► Extensive DSP featuring with delay function (up to 100 m)
► IDSE© intelligent digital sound editor (on-board optimization)
► Single-encoder EASY CONTROL DSP interface
► DBL© dual-band limiters for independently stable performance
► User presets (5 user preset memories)
► Graphic backlit screen (with locking function)
► Two combo inputs (XLR/6.3 jack with MIC/LINE switches)
► Two high-resolution microphone pre-amplifiers (in MIC mode)
► Rugged, texture-painted plywood enclosure
► Sophisticated 12" coaxial transducer
► 90° x 90° beam angle (for advanced sound distribution) |
The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations.
Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications.
APPLICATIONS
- • Live Sound
- • Rental
- • Portable PA
- • Stage Monitoring
- • Clubs
General Specs
1200 WATT PEAK, 600 WATT RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
SPL max. 129 dB
Acoustical Specs
Frequency Response -3 dB:50 Hz ÷ 20000 Hz
Max SPL:129 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Compression Driver:1“, 1.7" voice coil
Woofer:10“, 2.5" voice coil
Inputs/Outputs
Input signal:bal/unbal
Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:1700 Hz
Protections:thermal, RMS
Limiter:Fast limiter
Controls:Volume, EQ shape, Mic/line
Amplifier Specifications
Total power:1200 W PEAK
High frequencies:300 W PEAK
Low frequencies:900 W PEAK
Total power:600 W RMS
High frequencies:150 W RMS
Low frequencies:450 W RMS
Connections:VDE AC socket
Cabinet Specs
Cabinet Material:Composite PP
Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
Handles:1 top, 1 side
Pole Mount/Cap:Yes
Grille:Steel
Colour:Black
Size/Weight
Height:527/20.74 mm/inch
Width:303/11.92 mm/inch
Depth:302.5/11.90 mm/inch
Net Weight:13.9/30.64 kg/lbs |
Active 300-Watt 2-Way Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter
High-power 300-Watt 2-way monitor speaker system for live and playback applications
Exceptional sound quality, wide frequency bandwidth and dynamic range
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Adjustable feedback filter and integrated limiter for ultimate system control and speaker protection
Integrated sound processor for ultimate system control and speaker protection
Ultra-low noise Mic/Line input with Volume control and Clip LED
Dedicated 3-band EQ for perfect sound shaping
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
High-resolution 1'' HF driver for exceptional high-frequency reproduction
Proprietary horn design for ultra-wide sound dispersion
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Integrated 35 mm pole socket for stand mounting and use as PA system
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Reviews
There are no reviews yet.