Stinger 10 G2 Active Full-Range Speaker The Stinger 10 G2 is a compact, active full-range speaker with numerous potential applications. The 2-way system is powered by the built-in B&O ICEpower 50ASX2 Class D power amp with a continuous power rating of 170W / 4 ohms. It is loaded with a 10″ woofer and […]
The Stinger 10 G2 is a compact, active full-range speaker with numerous potential applications.
The 2-way system is powered by the built-in B&O ICEpower 50ASX2 Class D power amp with a continuous power rating of 170W / 4 ohms. It is loaded with a 10″ woofer and a 1″ BMS HF compression river which ensure broad frequency response and attain a maximum sound level pressure of 117dB (130dB peak). There is a 2-band EQ for shaping the sound. The inputs are XLR/jack combo connectors; the output is an XLR connector.
An ergonomically milled, recessed carrying handle in the cabinet makes it easier to transport. The reflex cabinet is built of rugged multiplex and has threaded inserts for wall mounting and attaching flyware. Mounting brackets and a protection bag are available as accessories.
Type: active
Woofer size: 10″
Woofer size: 254 mm
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2″
Woofer voice coil: 50.8 mm
Horn: CD horn
HF driver size: 1″
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: BMS
HF driver voice coil: 1″
HF driver voice coil: 25.4 mm
Amplifier: Class D, ICEpower 50ASX2
Dispersion angle (H x V): 100 x 55°
Power output (RMS): 170 W
Power output (peak): 340 W
Frequency range: 65 – 19,000 Hz
Crossover frequency: 2400 Hz
Max SPL (continuous/peak): 117 / 130 dB
Protection: HF driver, short circuit
Controls: Bass, Line Gain, Mic Gain, Power, Treble, Volume
Indicators: Limit, Power
Line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Line outputs: 1
Line output connectors: XLR
Power supply: switching power supply
Cabinet material: 15 mm plywood
Cabinet surface: textured coating
Cabinet type: bass reflex
Monitor angle: 54°
Width: 320 mm
Height: 500 mm
Depth: 290 mm
Features: Aluminium stand support 36 mm, ergonomically milled handles, M10 thread for SuperClamp
Weight
12.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems LDEB102AG2 STINGER G² Series – 10″ powered PA Speaker 340W PEAK” Cancel reply
The Stinger 10 G2 is a compact, active full-range speaker with numerous potential applications.
The 2-way system is powered by the built-in B&O ICEpower 50ASX2 Class D power amp with a continuous power rating of 170W / 4 ohms. It is loaded with a 10" woofer and a 1" BMS HF compression river which ensure broad frequency response and attain a maximum sound level pressure of 117dB (130dB peak). There is a 2-band EQ for shaping the sound. The inputs are XLR/jack combo connectors; the output is an XLR connector.
An ergonomically milled, recessed carrying handle in the cabinet makes it easier to transport. The reflex cabinet is built of rugged multiplex and has threaded inserts for wall mounting and attaching flyware. Mounting brackets and a protection bag are available as accessories.
Type: active
Woofer size: 10"
Woofer size: 254 mm
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2"
Woofer voice coil: 50.8 mm
Horn: CD horn
HF driver size: 1"
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: BMS
HF driver voice coil: 1"
HF driver voice coil: 25.4 mm
Amplifier: Class D, ICEpower 50ASX2
Dispersion angle (H x V): 100 x 55°
Power output (RMS): 170 W
Power output (peak): 340 W
Frequency range: 65 - 19,000 Hz
Crossover frequency: 2400 Hz
Max SPL (continuous/peak): 117 / 130 dB
Protection: HF driver, short circuit
Controls: Bass, Line Gain, Mic Gain, Power, Treble, Volume
Indicators: Limit, Power
Line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Line outputs: 1
Line output connectors: XLR
Power supply: switching power supply
Cabinet material: 15 mm plywood
Cabinet surface: textured coating
Cabinet type: bass reflex
Monitor angle: 54°
Width: 320 mm
Height: 500 mm
Depth: 290 mm
Features: Aluminium stand support 36 mm, ergonomically milled handles, M10 thread for SuperClamp
The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker
APPLICATIONS
• Main vocal stage monitor
• High-output drum or keyboard monitor
• Main PA in small venues
General Specs
1400 Watt Peak, 700 Watt RMS digital bi-amplification
129 dB max spl
60° x 60° constant directivity horn
12" High power neodymium woofer, 2.5" voice coil
1.7 kapton dome, 1" exit, neodymium high frequency driver
DSP processing, floor - fre field equalization, soft limiter and protection
The NX M10-A is the most compact and lightweight speaker of the NX range.
It is specifically designed as a versatile tool from stage monitoring to a very accurate near field sound reproduction.
From live sound to playback music the NX M10-A guarantees high performances and is superior to many larger speakers thanks to the high efficiency of its 10” neodymium transducer.
Acoustical Specifications
Frequency Response -3 dB:
50 Hz
÷ 20 kHz
Max SPL:
129 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
70°
Compression Driver:
1" neo, 1.75" v.c.
Woofer:
10" neo, 2.5" v.c
INPUT/OUTPUT SECTION
Input signal:
bal / unbal
Input connectors:
Combo xlr-jack
Output connectors:
xlr
Input sensitivity:
-2 dBu / +4 dBu
PROCESSOR SECTION
Crossover frequencies:
1700 Hz
Protections:
Thermal, rms
Limiter:
Soft peak limiter
Controls:
Volume, side / floor, contour
AMPLIFIER SPECIFICATIONS
Total power:
750 Watts
High frequencies:
250 Watts
Low frequencies:
500 Watts
Cooling:
Convection / forced
Connections:
Powercon in / out
CABINET
Cabinet Material:
Balitc birch
Hardware:
6 x fly tracks
Handles:
2 side
Pole Mount/Cap:
Yes
Colour:
Black
PHYSICAL SPECIFICATIONS
Height:
515 / 20.27 mm/inch
Width:
334 / 13.14 mm/inch
Depth:
337 / 13.26 mm/inch
Net Weight:
15.2 / 33.5 Kg/Lbs
LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
10-inch LF SMX woofer
1.25-inch HF titanium compression driver
2000 W Class-D power amplifier with integrated FIR-Drive DSP
134 dB peak SPL
Frequency Range
65 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass.
Maximum SPL
134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
Power Consumption
100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A Current rating is 1/8 power.
Power Rating
2000 W
Frequency Response
85 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass.
Coverage (Nominal -6 dB) H
90 °
Coverage (Nominal -6 dB) V
60 °
LF Transducer
SMX2100 254 mm (10 in)
HF Transducer
DH3-B 1.25-in titanium compression driver
Crossover Frequency
1700 Hz
Connector Type
(2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material
18-mm, 13-ply birch plywood with EVCoat
Grill
16AWG steel with powdercoat
Suspension
(8) M10 suspension points
Height
526 mm (20.71“)
Width
330 mm (12.99“)
Depth
365 mm (14.37“)
Weight Net
20.3 kg (44.75 lbs)
Shipping Weight
22.9 kg (50.49 lbs)
2 way full range powered loudspeaker for portable PA and installation applications
600 Watt power featuring KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal Processing for total system control
High excursion 10" low frequency driver with low mass voice coil for improved transient response
1" high temperature dome compression driver with extended high frequency reproduction
Converging elliptical waveguide provides wide dispersion and excellent pattern control
Speech/music switch featuring optimised equalisation for voice or music applications
Switchable 100 Hz high pass filter for subwoofer integration
Lightweight composite enclosure with black finish
Rugged powder coated perforated steel mesh grille
Dual angle pole mount for accurate audience coverage
Multiple internal rigging points for installation applications
3-Year Warranty Program*
Designed and engineered in England
Dimensions (H x W x D)
522 x 329 x 294 mm (20.6 x 12.9 x 11.6“)
Net Weight
13.3 kg (29.3 lbs)
Components
1 x 10" (254 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response
55 Hz - 18 kHz ±3 dB
Dispersion
90 °H x 60 °V @ -6 dB points
Calculated Max SPL
126 dB peak
Construction
Injection-moulded polypropylene enclosure. Recessed carrying handle. Integral dual-angle pole mount socket
Grille
Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.