Content | LD Systems STINGER 12 A G2
12" active PA Speaker
Stinger 12 G2 Active Full-Range Speaker
The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations.
The 2-way bass reflex design made of sturdy multiplex is loaded with a 12" woofer and a 1" BMS HF driver that attain a high maximum sound pressure level of 118dB (132dB peak). It is powered by the built-in Hypex Ucd400 Class D power amp with a peak power rating of 1600W / 4 ohms. An integral 2-band EQ is provided for tone control. The inputs are XLR/jack combo connectors. The output is an XLR connector. A Speakon-compatible power amp output permits parallel operation of passive speakers and subwoofers.
The hardware includes a stand support that is vertically adjustable by ±13.5° max. in seven increments for optimum orientation, six mounting holes for flyware, and LD "Evolutive" handles. These innovative carrying handles offer a secure grip from all sides for easier transport. Mounting brackets and a protective cover are available as accessories.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Low/mid driver dimensions (mm)
304.8 mm
Woofer voice coil (mm)
63.5 mm
HF driver dimensions (mm)
25.4 mm
HF driver voice coil (mm)
25.4 mm
Amplifier
Class D, Hypex Ucd400
Dispersion (H x V)
100 x 55 °
Frequency response
58 - 19000 Hz
Crossover frequency
1800 Hz
Max. SPL (continuous)
118 dB
Protection circuits
HF Driver , over voltage , over-current
Input sensitivity
- 5 dBu
Controls
Bass , Line Gain , Mic Gain , Power , Treble , volume
Indicators
limit , Power , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Mic inputs
6.3 mm Jack , XLR
Line output connectors
XLR
Speaker output connections
Speakon compatible
Minimum impedance of connected speakers
8 Ohm(s)
Operating voltage
Switching Power Supply
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Cabinet construction
vented
Features
*Short Term Max. SPL Peak @ 1m with Pink Noise , 6 x M8 flying points , LD Systems "Evolutive" handles , SM707 stand mount 36 mm
|
The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Main PA in small venues
General Specs
- 1400 Watt Peak, 700 Watt RMS digital bi-amplification
- 129 dB max spl
- 60° x 60° constant directivity horn
- 12" High power neodymium woofer, 2.5" voice coil
- 1.7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:50Hz ÷ 20000 Hz
- Max SPL:129dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:1.7 kapton dome, 1" exit, neodymium
- Woofer:12" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:1400W PEAK
- High frequencies:400 W PEAK
- Low frequencies:1000 W PEAK
- Total power:700W RMS
- High frequencies:200 W RMS
- Low frequencies:500 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:550/21.6mm/inch
- Depth:417/16.4mm/inch
- Net Weight:16,5/36.3kg/lbs
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
|
- 1000w RMS, 2000w peak, power delivers clarity, punch and more than enough headroom for any
- performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds
- with precise, full response across the entire frequency range without any artificial colouration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
Specifications:
- Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
- Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
- High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
- Crossover Frequency: 2.0KHz
- Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
- Frequency Response: 53Hz – 20kHz (+3dB)
- Frequency Range: 46Hz – 22kHz (-10dB)
- Horn Coverage 90o horizontal x 60o vertical (nominal)
- Equalisation: Contour switch with low- and high-frequency +3dB boost
Connectors: - (2) XLR/TRS 1/4” (6.35mm) combo inputs - (1) XLR link output - (1) IEC power cable input
- Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
- Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
- Protection: Electronic clip, thermal & transducer overdrive
- Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
- Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
- Consumption: 800W
- Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Dimensions: (width x depth x height) 605 x 354 x 350mm Weight: 16.3kg |
12” active coaxial monitor
350W class D+ 65W class AB
FR: 60Hz-20kHz
Max SPL: 121dB
Input level: LINE -6dBu
12” coaxial woofer with 1” driver
Protection: Thermal/Convection fan/Overload/limiter/compression
The INVoTONE DSX series is a brand new cabinet line in the premium segment. The speakers are characterized by their accurate and balanced sound. Even very high sound pressure levels are reached. The speakers are comparable in every respect with high-priced branded products, just not in the price! In addition to the acoustic and technical qualities, this series is also mechanically equipped with all the professional features that are common in this segment. "- Monitor and Coaxial 12" subwoofers up to 2x15 "2-way floorstanding speaker and a 18" subwoofer Currently, our product range includes compact 12 arrived.
Power
| 350Watt RMS Biamp | Frequency range (-10dB) | 60Hz-20kHz | Maximum SPL @ 1m | 121dB | Radiation (HxV) | 70 ° x 70 ° | Components | 12 "woofer, 1" HT-driver coaxial system | Connectors | INPUT jack combo / OUTPUT XLR male balanced link. | Input Level | Line -6dBu | Control switches | Volume Control, Ground Lift, monitor / FOH preset switchable ON / OFF | Protection circuits | temperature controlled fan, limiter, compressor | Housing | MDF with durable black textured lacquer, metal front grille, rubber feet, wooden handles, Hochständeflansch | Dimensions | (HxWxD) 313mm x 393mm x 513mm | Weight | 14KG |
| The self-powered KD12 is an uncompromising monitor and fullrange speaker - all-in-one. The KD12 delivers advanced sonic clarity and top performance. Whether as stage monitor, fullrange speaker, frontfill for larger stages or as delay speaker: The KD12 is the ideal allround solution for the up-market user.
Features
► High-class performance in ultra-lightweight design (14 kg only)
► 1.000 W Class D bi-amped power module
► Extensive DSP featuring with delay function (up to 100 m)
► IDSE© intelligent digital sound editor (on-board optimization)
► Single-encoder EASY CONTROL DSP interface
► DBL© dual-band limiters for independently stable performance
► User presets (5 user preset memories)
► Graphic backlit screen (with locking function)
► Two combo inputs (XLR/6.3 jack with MIC/LINE switches)
► Two high-resolution microphone pre-amplifiers (in MIC mode)
► Rugged, texture-painted plywood enclosure
► Sophisticated 12" coaxial transducer
► 90° x 90° beam angle (for advanced sound distribution) |
Reviews
There are no reviews yet.