| Content |
Use's manual [3,48 MB]
Battery disposal information [77,1 KB]
|
|
| | LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set
The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!
Specifications MEI ONE Transmitter:
- Fixed Frequencies:
- LDMEIONE1T: 863.700 MHz
- LDMEIONE2T: 864.100 MHz
- LDMEIONE3T: 864.900 MHz
- RF output power: 10 dBm
- Gain adjustment range: + 40 dB
- Max. audio input level: + 6 dBV
- Front panel controls: Power On / Off, Headphones Level
- Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
- Input: 2 x XLR / 6.3 mm Jack (combo)
- Power requirement: 12 - 18 V DC, 300 mA External Power Supply
- Operating temperature: -10°C to +50°C
- Dimensions (W x H x D): 212 x 38 x 96 mm
|
|
- Supports video resolutions up to Full HD 1080p/60Hz.
- Plug the HDMI receiver into the HDMI input on your display or projector and power via a USB port.
- Plug the HDMI transmitter into the HDMI output or USB-C port on your laptop, MacBook or Chromebook without the use of an additional power cable.
- Turn your PC or laptop into a media center and share content wirelessly on a display mounted on a floor stand or wall mount.
- Connect up to 20 HDMI transmitters to a single HDMI receiver and easily switch between presenters with a press of a button.
- Use your smart phone or tablet (Android or Apple) to stream content wirelessly to the receiver via the built-in AirPlay or Miracast function (screen mirroring).
Video/audio
|
|
| Video resolution |
1080p@60Hz |
| PC resolution |
Max. 1920 x 1080 |
| HDMI standard |
HDMI 1.4 / HDCP 1.3 |
| Audio formats |
PCM stereo |
Technology
|
|
| Operational frequency |
5 GHz |
| Operating range |
Up to 20 metres LOS (line of sight) |
| Latency (delay) |
<120 ms |
| Video compression |
H.264 |
Transmitter
|
|
| AV input |
1 x HDMI |
| USB input |
1 x micro-USB (PC, laptop) |
| Dimensions (h x w x d) |
83 x 32 x 13 mm |
| Weight |
27 grams |
General
|
|
| Ambient temperature |
0 ~ 40 °C |
| Ambient humidity |
20% ~ 90% |
| Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.
The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.
- Available in the following frequency bands:
541.500 - 566.375 MHz (C Band)
655.500 - 680.375 MHz (D Band)
721.500 - 746.375 MHz (G Band) - 25 kHz frequency spacing makes it easier to find a clear, open
- frequency in crowded RF environments
- Dual RF power output selection to optimize battery life
- Digital Tone Lock™ squelch that communicates transmitter data
- to the receiver
- Function menu displayed in a backlit LCD window, controlled by
- internal soft-touch controls
- High efficiency dual companding system for flawless audio
- Four nameable user presets
- Battery fuel gauge on LCD readout
- Recessed microphone input connector
- Power/mute lock provision as well as safety door to cover controls
- Dual-colour power/mute status indictor
- Microphone or line input with DC bias voltage
- 18 dB audio input level adjustment
- Operates on two AA batteries
- Captive locking battery compartment door
- Adjustable squelch
- Rugged metal housing with a reversible clothing clip
- RF Power Output: High: 35 mW; Low: 10 mW, nominal
- Spurious Emissions: According to National Regulations
- Microphone Dynamic Range: >=110 dB, A-weighted
- Instrument Dynamic Range: >=110 dB, A-weighted
- Input Connections: High impedance, low impedance, bias
- Batteries: Two 1.5V AA alkaline (not included)
- Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
- Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
- Net Weight: 125 g
|
The P9R is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. It offers premium features like RF Scan and Automatic Gain Control for unparalleled RF stability and channel availability, all packed in the thinnest form factor available. Patent-pending CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels from one bodypack for quick and easy reference.
Features:
Ultra-thin, low profile bodypack allows discreet placement on the performer
Enhanced digital stereo encoder provides an expansive soundstage for excellent audio clarity and detail
RF Scan: stand where the artist will be on stage and instantly check RF level
Automatic Gain Control greatly prevents signal dropout due to RF overload and allows more channels to be used simultaneously
Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
Separate, easily visible audio and RF status indicator LED's
Audio level and battery life metering
Selectable high-frequency EQ boost (+3/+6 dB @ 10 kHz)
Volume and balance controls
Extruded aluminum construction for rugged dependability
Specifications:
Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency
Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
RF Sensitivity (20 dB SINAD): 2.2 µV
Squelch Threshold (±3 dB SINAD): 22 dB SINAD
Adjacent Channel Rejection: >70 dB
Intermodulation Attenuation: >70 dB
Blocking: >80 dB
Image Rejection: >100 dB
Audio Output Power (1kHz @ |
Specifications:
- Transmit Power: Switchable 10mW, 50mW
- RF bandwidth: up to 40MHz
- Number of compatible frequencies per band: 20
- Audio frequency range: 35Hz to 15kHz
- S / N Ratio (A weighted): 90dB
- Stereo Separation: 60dB |
Battery disposal information [77,1 KB]
Frequenzy List [246,1 KB]
LD Systems MEI100G2
The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 80 Hz - 15 kHz ± 3 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 8,5 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, mono/stereo, AF level (left/right)
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 212 mm
- Height: 38 mm
- Depth: 90 mm
- Accessories (included): Antenna, power supply, headphones
|
Reviews
There are no reviews yet.