Audio Technica AEW-T1000a UHF UniPak™ transmitter

Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.

The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.

• Available in the following frequency bands:
  541.500 - 566.375 MHz (C Band)
  655.500 - 680.375 MHz (D Band)
  721.500 - 746.375 MHz (G Band)
• 25 kHz frequency spacing makes it easier to find a clear, open
• frequency in crowded RF environments
• Dual RF power output selection to optimize battery life
• Digital Tone Lock™ squelch that communicates transmitter data
• to the receiver
• Function menu displayed in a backlit LCD window, controlled by
• internal soft-touch controls
• High efficiency dual companding system for flawless audio
• Four nameable user presets
• Battery fuel gauge on LCD readout
• Recessed microphone input connector
• Power/mute lock provision as well as safety door to cover controls
• Dual-colour power/mute status indictor
• Microphone or line input with DC bias voltage
• 18 dB audio input level adjustment
• Operates on two AA batteries
• Captive locking battery compartment door
• Adjustable squelch
• Rugged metal housing with a reversible clothing clip

• RF Power Output: High: 35 mW; Low: 10 mW, nominal
• Spurious Emissions: According to National Regulations
• Microphone Dynamic Range: >=110 dB, A-weighted
• Instrument Dynamic Range: >=110 dB, A-weighted
• Input Connections: High impedance, low impedance, bias
• Batteries: Two 1.5V AA alkaline (not included)
• Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
• Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
• Net Weight: 125 g

The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.

It is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.

True diversity receiver with all-metal case
Available in eight UHF bands 30 MHz wide each, with up to 1,200 selectable frequencies
Using several frequency bands allows up to 70 channels to be operated simultaneously.
Transmitter battery status monitoring and tone code squelch
Auto Setup, Environment Scan, and Rehearsal functions for quick and easy setup
Backlit, programmable color display and jog wheel with selectable warning signal for ease of use
Output for controlling external devices

-Theater, onstage miking
-Conferencing
-Houses of worship
-Live sound
-Sound/AV company

Carrier frequency range 500 to 530, 570 to 600, 650 to 680, 680 to 710, 720 to 750, 760 to 790, 790 to 820, 835 to 863 MHz
Audio bandwidth 35 to 20,000 Hz
THD 120 dB(A) typical
Modulation FM
Audio outputs balanced 3-pin XLR; unbalanced TS 1/4" jack; output level adjustable to -30, 0, +6 dB
Dimensions 200 x 44 x 190 mm (7.8 x 1.7 x 7.4 in.)
Net weight 972 g (2.2 lbs.)

The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.

This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.