Content |
Features at a glance - Supports Sennheiser wireless system mics and transmitters (DR-10CS)
- Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
- Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration - 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between DR-10C units using the infrared transmission function
- Firmware can be updated using a microSD card
- Belt clip included
- Silicon band that can be used to attach the unit to a transmitter included
- Custom case for storing the unit and accessories included
- RoHS-compliant product
| SPECIFICATIONS
[Recorder]
●Physical Tracks : 24 ●Simultaneous Recording Tracks : 8 ●Simultaneous Playback Tracks : 24 ●Recording Data Format : 44.1/48kHz, 16/24bit WAV ●Maximum Recordable Time : 200 minutes / GB (44.1kHz 16-bit, mono tracks) ●Projects : 1,000 ●Markers : 100 / Project ●Locator : Hours / Min. / Sec. / msec or Bars / Beats / Ticks ●File Editing : Divide, Trim ●Other Functions : Punch-In / Out (Manual, Automatic), Bounce, A-B Repeat, Undo / Redo, Metronome
[Audio interface]
●Input Channels : 8 ●Output Channels : 2 ●Quantization : 24bit ●Sampling Frequency : 44.1, 48, 88.2, 96kHz
[Mixer]
●Faders : 9 ●Level Meters : 4-Segment LED ●Track Parameters : 3-Band Equalizer, Pan (Balance), Effect Send x 2, Invert ●Stereo Links Track pairs : 1/2 to 23/24 selectable
[Effects]
●Algorithms : 9 (CLEAN, DISTORTION, ACO / BASS SIM, BASS, MIC, DUAL MIC, STEREO, 8 x COMP EQ, MASTERING) ●Types : 150 ●Modules : 7 for Insert, 2 for Send / Return ●Patches : 330 for Insert, 60 for Send / Return ●Tuner : Chromatic, Guitar, Bass, Open A/D/E/G, D modal
[Sampler]
●Playback Data Format: 44.1/48kHz, 16/24bit WAV ●Voices: 24 ●Editing Functions: Trim, Time-stretch
[Rhythm]
●Voices: 8 ●Sound Format: 16-bit Linear PCM ●Drum Kits : 10 ●Pads : 8 (velocity-sensitive) ●Precision : 48 PPQN ●Rhythm Patterns : 511/project ●Patterns : 511 (472 factory, 39 blank) / Project ●Beat : 1/4 - 8/4 ●Tempo : 40.0 - 250.0 BPM
[Hardware]
●Recording Media : SD Card (16MB-2GB), SDHC Card (4-32GB) ●A/D Conversion : 96kHz 24bit delta-sigma ADC ●D/A Conversion : 96kHz 24bit delta-sigma DAC ●Display : 128 x 64 pixel LCD (with backlight) ●Inputs : 8 x XLR-1/4''Phone Combo Jack / Input Impedance: (Balanced input) 1kΩ balanced, 2nd hot, (Unbalanced input) 50kΩ unbalanced, (Hi-Z Input) 470kΩ / Input Level: -50dBm to +4dBm continuously variable ●Built-in microphones : Omnidirectional condenser microphones Gain: -50dBm to +4dBm continuously variable ●Phantom Power Supply : 48V / 24V ●Master Output : 1/4“TRS Phone (balanced) / Output Impedance: 1kΩ / Rated Output Level: +4dBm ●Headphones Output : 1/4''Stereo Phone Jack, 20mW x 2 (at 32Ω load) ●USB : [B type (USB2.0 High-Speed compatible)] Audio Interface / Control Surface or Mass Storage Class operation [A type (USB2.0 High-Speed compatible)] USB Host capability ●Power Requirements : AC adaptor (DC5V/1A/center positive) or AA size (LR6) battery x6 ●Battery Life : 4.5 hours (with backlight on and phantom power off) ●Dimensions : 376(W) x 237.1(D) x 52.2(H) mm ●Weight : 1.3kg (without batteries)
*0dBm=0.775Vrms
R24 USB Audio Interface System Requirments
Windows® Windows® XP SP2 or later / Vista SP1 or later / 7
Intel® Pentium® 4 1.8GHz or better
1GB RAM or more
USB 2.0 compatible port
Intel® Mac OS X 10.4.11 or later / 10.5 / 10.6 / 10.7
Intel® Core Duo processor 1.83GHz or better
1GB RAM or more
USB 2.0 compatible port.
* USB hub is not supported.
* Intel® Chipset is recommended. |
The TASCAM SS-200 Solid State Recorder - designed for the Broadcast and Contractor markets - record in WAV & MP3 to Compact Flash, SD/SHC, and USB memory. The SS-R200 features parallel and RS-232C serial control balanced & unbalanced I/O, and coaxial digital I/O. It supports the RC-20 direct play remote for up to 20 tracks of flash start.
- Solid state recoding to any available Media (CF, SD/SDHC, USB Memory)
- One-rack-space compact design
- Up to 20 tracks of flash start with RC-20 and RC-SS20 remote control devices
- PS/2 or USB keyboard connection for file name edit, transport control, edit and flash start
- RS-232C and Parallel Control I/O
- Multiple playback modes for situations requiring continuous, single, programmed and random playback
- Playback speed control without pitch change
- XLR balanced I/O, RCA unbalanced I/O, coaxial S/PDIF, or AES/EBU digital I/O
- Dimensions (W x H x D): 19 x 1.8 x 11.9 (in) 482.6 x 44.5 x 301 (mm)
- Weight: 7.50 (lbs) 3.4(kg)
| Recording Media SD/SDHC card (up to 32GB)
Built-in Mic MS stereo & 90-degree XY stereo
Maximum Sound Pressure Level 120dB SPL
Recording Format 《STEREO MODE》
PCM (Quantization : 16/24bit, Sampling Frequency : 44.1/48/96kHz),
MP3 (Bit Rate : 48 to 320kbps, Sampling Frequency : 44.1kHz)
《4CH MODE》
PCM (Quantization: 16/24bit, Sampling Frequency: 44.1/48kHz)
A/D Conversion 24bit, 128times oversampling
D/A Conversion 24bit, 128times oversampling
Signal Processing 32bit
Functions Lo-cut Filter, Compressor/Limiter, Auto Gain, Pre-Rec, Auto-Rec, Tuner,Metronome, Variable Speed Playback, Key Control, A-B Repeat,File Dividing, Normalize, MP3 Post-Encode, Marker, Surround Mixer
Display 128 x 64 pixel, backlit LCD
Input Gain 0 to +39dB
Mic / Line Input 1/8" stereo phone jack (Plug-in power supported)
Input impedance 2kΩ (Input level: 0 to -39dBm)
Phones / Line Output 1/8" stereo phone jack
Rated Output Level -10dBm
Output Load Impedance 10kΩ or more
Phones Output Level 20mW + 20mW into 32Ω load
Built-in Speaker 400mW 8Ω
USB Mini-B type, Mass Storage Class operation (USB2.0 High Speed compatible),
Audio Interface operation (16bit, 44.1kHz/48kHz)
Power Requirements AA/LR6 battery x 2, or AC adapter AD-17 (DC5V/1A/center positive)
Battery Life 20 hours (16bit/44.1kHz WAV recording)
Dimensions 67.6 (W) x 113.8 (D) x 42.7 (H) mm
Weight 130g (without batteries) |
Connect
Multiple units can be daisy-chained over the FireWire bus, or kept in sync using the DIN connectors when recording on multiple USB devices, making iCE-16 the perfect companion for both small and large analogue consoles such as our acclaimed ZED, MixWizard and GL mixers. Plug into your desk Direct Outs or use a mix of Groups and Aux sends to save on channels.
Record
The USB DRIVE is automatically detected and checked by the system. Starting the recording is as simple as pushing a button. Remove and plug the key into a computer to access or transfer the WAV files to any DAW.
Interface
Removing the USB stick or powering up the unit without one enables the USB / FireWire interface. Signals present at the inputs will be sent to the Mac or PC on channels 1-16. WDM/ASIO drivers and USB2.0 class compliance ensure full compatibility with most DAWs, including Logic, Sonar, Cubase and Pro Tools.
Play
Fancy a ʽvirtual soundcheckʼ or just need to play cues during a live gig? Tracks can be played back directly from the USB drive and full multichannel audio can be sent from the computer to the ICE-16 analogue Outputs.
|
Why are 4-channels of audio better than 2-channels?
-
Capture more ambient sound at any shoot for an overall more convincing soundscape.
-
Place mics on each participant in conferences, panels, reporters, etc.
-
Redundancy or backup in case of camera mic noise or drop out.
-
Simplify wedding shoots with a mic on the bride, groom, officiator and a mic for ambient sound.
-
Video editing environments now support multi-channel audio as standard.
-
Main Features
The R-4 brings you a new generation of portable recording. Enjoy superb sound quality. Use the 40GB hard disk drive for extended recording. Record up to four channels at once. Edit waveforms on the recorder itself. All this plus a compact size and light weight that assure outstanding mobility in the field. The Edirol R-4. Gear up for the new generation of portable recording.
Extended Recording with 40GB Hard Disk Drive
Equipped with a 40GB hard disk drive, the R-4 can record up to 17 hours at maximum sound quality or up to 58 hours at CD quality.
Superior 24-bit/96-kHz Linear Recording
Totally uncompressed recording assures outstanding sound quality. Choose 16-bit or 24-bit quantization and a sampling rate of 44.1 kHz, 48 kHz, or 96 kHz. Save data as WAV files.
Simultaneous 4-Channel Recording
The 4 XLR/Phone combo jacks come with switchable phantom power and give you a choice of MONO, STEREO, STEREO X2, or 4CH recording. Digital input/output is also provided.
Four-channel recording gives you exceptional flexibility. For example, you can use mics to capture the ambience of a performance hall while using line input to record the performance itself. Or you can record at several different level settings simultaneously.
-
Five High-Quality Effects
The R-4 lets you tailor the sound during both recording and playback.
-
L Terminal for Linking a Digital Video Camera
The R-4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.
Waveform Editing Using Only the R-4
The R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.
Index Any Point Instantly
Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.
Easy Playback with the Jog Dial
Use the jog dial to fast-forward or rewind at any of seven speed levels.
Built-In Stereo Speakers
The R-4's built-in speakers make it easy to monitor recorded sound without headphones.
-
L Terminal for Linking a Digital Video Camera
The R-4's L terminal lets you connect a similarly equipped digital video camera to synchronize the camera start/stop while R-4 is recording. Counting the camera's two channels, this configuration gives you a total of six audio channels — a wealth of audio data to get creative with.
Waveform Editing Using Only the R-4
The R-4 is all you need to edit waveforms. Just watch the waveform on the LCD as you edit. Scrubbing playback with the shuttle dial lets you set the edit points precisely by sound.
Index Any Point Instantly
Press the mark button anytime during recording or playback to mark that point for easy, instant indexing later. With the A-B repeat function you can set two points and repeatedly play back the material between them.
Easy Playback with the Jog Dial
Use the jog dial to fast-forward or rewind at any of seven speed levels.
Built-In Stereo Speakers
The R-4's built-in speakers make it easy to monitor recorded sound without headphones.
|
Reviews
There are no reviews yet.