| Content |
CD-RW Recorder - Slot loading transport
- Acceptable discs: CD-R, CD-RW, CD-R-DA, CD-RW-DA
- High Speed Recording Media is applicable
- MP3 playback
- 24 bit AD/DA converter
- Digital input volume control
- Sampling rate converter (32kHz/ 44.1kHz / 48kHz)
- Unbalanced analog I/O (RCA)
- COAXIAL and Optical digital I/O (CD)
- Fade in and out
- Auto Track Increment (via SPDIF or Audio Level)
- Erase or Un-finalize of CD-RW discs
- Multiple playback modes
- Pitch control (±12.5%, CD-DA only)
- Key control (±6 half tone, CD-DA only)
Cassette - 10% Pitch Control
- Return to Zero Function
- Dolby B Noise Reduction
- Auto Reverse
General - RIAA Phono Input for recording onto CD-R/RW discs or cassette tape
- Independent Output for CD and Cassette (selectable)
- Continuous Play between Cassette & CD
- Cassette to CD-R/RW dubbing and vice versa
- Headphone Output w/Level Control
- RC-222 Wireless Remote Included
- Dedicated analog input level controls
- Power-on play
Specifications
CD recorder section
Recordable discs CD-R, CD-R-DA, CD-RW, CD-RW-DA (High speed CD-RW is supported)
Quantization bit depth 16 bit linear
Sampling frequency 44.1 kHz
Frequency response 20 Hz – 20 kHz, ±0.8 dB (playback)
20 Hz – 20 kHz, ±1.0 dB (recording)
S/N ratio 92 dB (playback)
88 dB (recording)
Dynamic range 92 dB (playback)
88 dB (recording)
Total harmonic distortion 0.006 % (playback)
0.01% (recording)
Channel separation (1 kHz) 80 dB (playback)
75 dB (recording)
Wow and flutter unmeasurable (
Digital inputs
Sampling rate 32–48 kHz (converter on)
44.1 kHz (converter off)
Coaxial (SPDIF) RCA (IEC60958 Consumer use)
Optical (SPDIF) TOSLINK (IEC60958 Consumer use)
Digital outputs
Coaxial (SPDIF) RCA (IEC60958 Consumer use)
Optical (SPDIF) TOSLINK (IEC60958 Consumer use)
Line input 1 RCA (unbalanced)
Nominal input level –10 dBV (Full Scale -16 dB)
Maximum input level +6 dBV
Nominal input impedance 50 kOhm, ±10 %
Line output 1 RCA (unbalanced)
Nominal output level –10 dBV (–16 dBFS)
Maximum output level +6 dBV, ±2 dB
Nominal output impedance 600 Ohm, ±10 %
Cassette recorder section
Number of channels 4-track, 2-channel stereo
Heads Record/playback x 1 (rotary reverse), erase x 1
Type of tapes Recording and playback: Compact Cassette C-60, C-90 Type I (Normal), Type II (high-position)
Playback only: Type IV (Metal)
Tape speed 4.76 cm/s
Motor DC servo motor x 1
Wow and flutter |
- 6CD CHANGER(MP3/WMA)
- Magazine TYPE Reliable Mechanism
- DOT MATRIX design VFD Display
- CD/CD-R/CD-RW/MP-3/WMA File Readable
- XLR (MONO/STEREO) & RCA Analog output
- Coaxial & Optical Digital Ouput
- AMX & CRESTRON Interface(RS-232C)
- IR Remote Control
- Audio Channel : 2 Channels
- Frequency Response : 20Hz~20KHz ±1dB
- Distortion : Less than 0.05%
- Signal-to-Noise Ratio : Better than 90dB
- Analog Output Level(Variable) :
RCA : Nominal 2V(+9dB/-30dB)
XLR : Nominal 4V(+9dB/-30dB) - Head phone Output Level : 1.5V at max (load impedance 32 Ω)
- Quantization : 24bit
- Sampling Frequency : 44.1kHz
- Power Source : 100~120VAC or 220~240VAC; 50/60Hz, 24VDC
(supplied AC mains transformer depends on country requirements) - Power Consumption : 18W (standby : Less than 1W)
- Weight : 6.2kg
- Dimensions (WxHxD) : 482x88x380mm / 19x3.5x14.9in
|
The MS 1033 is really a dual sound source, built on two independent sections that can be used at the simultaneously.
Each section has a stereo sound output and its own level control. A selector, which is common to both sources, can mix the stereo channels transforming the CD and TUNER output to MONO for applications that do not require a stereo signal. The MS 1033 can be fitted in a rack (1U 19“).
| Features |
|---|
| Double sound source with two indipendent sections and outputs (Tuner - CD/MP3) | | CD player insert to reproduce audio tracks and MP3 files from a compact disc (CD, CD-R, CD-R/W) | | MP3 player from the USB drive or SD-Card drive (“Flash" memory-stick) | | The USB port is available on both the front and back panels to provide maximum flexibility | | LCD display gives information on the CD and MP3 files | | I/R remote control included | | FM radio tuner (87.5 - 108 MHz) with possibility to memorize your 30 favourite radio stations | | LCD display shows the frequency and stations that are in the memory |
| INPUT SECTION |
|---|
| Controls: | Tuner out volume control, Mixed out volume control, CD out volume control | |
| OUTPUT SECTION |
|---|
| Output Level: | + 4 dBu | | | AUX output: | RCA ( L&R TUNER); RCA ( L&R CD-USB/MP3-SD/CARD); RCA ( L&R MIXED) | |
| TUNER SPECIFICATIONS |
|---|
| Frequency range: | 87.5 ÷ 108 MHz | | | Frequency Response: | 100 Hz ÷ 12 kHz | | | Sensitivity (s/n ratio: 30 dB): | | | | Total harmonic distortion: | | | | Stereo separation: | > 40 dB | | | FM Intermediate rejection: | > 75 dB | | | FM Image rejection: | > 25 dB | | | FM signal/noise ratio: | > 50 dB | | | Antenna input: | 75 Ω | |
| CD / MP3 PLAYER SPECIFICATIONS |
|---|
| Frequency Response: | 20 Hz ÷ 20 kHz | | | Signal/noise ratio: | > 80 dB | | | Total harmonic distortion: | | | | Stereo separation: | > 60 dB | |
| POWER REQUIREMENT |
|---|
| Operating voltage: | 220÷240 / 110÷120 ~ 50 / 60 V ~ Hz | | | Power (consumption): | 50 W | | | Fuse model: | T3.15AL - 250 V ;T6.3AL - 250 V | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 44 / 1.73 mm/inch | | | Width: | 482 / 18.97 mm/inch | | | Depth: | 250 / 9.84 mm/inch | | | Net Weight: | 3.60 / 7.93 Kg/Lbs | |
| SHIPPING INFORMATION |
|---|
| Package height: | 120 / 4.72 mm/inch | | | Package width: | 540 / 21.25 mm/inch | | | Package depth: | 380 / 14.96 mm/inch | | | Shipping Weight: | 4.6 / 10.14 Kg/Lbs |
|
The CD-200iL is built with a retractable iPod dock on the front of the player. You can attach iPods or iPhones with the 30-pin dock or Lightning connector. With this new dual connector dock, the CD-200iL is compatible with any iPod or iPhone device making it ideal for users with varying iOS Devices.
| Playback media | CD, CD-ROM, CD-R, CD-RW(12cm/8cm) | | Playback format | | | CD-DA | Stereo, 44.1kHz, 16bit | | WAV | Stereo, 8k / 16k / 32k / 11.025k / 22.05k / 44.1k / 12k / 24k / 48kHz, 8/16bit | | MP2 | Stereo, 32k / 44.1k / 48kHz, 32kbps - 384kbps | | MP3 | Stereo, 32k / 44.1k / 48kHz, 32kbps - 320kbps, VBR | | Analog audio input | | | Connector | 3.5mm (1/8“) stereo mini jack | | Input impedance | 22k ohms | | Nominal input level | -20dBV | | Maximum input level | -4dBV | | Analog audio output | | | UNBALANCED | | | Connector | RCA pin-jack | | Output impedance | 200ohms | | Nominal output level | -10dBV(0.32Vms) | | Maximum output level | +6dBV(2.0Vms) | | デジタル出力 | | | COAXIAL | | | Connector | RCA pin-jack | | Output impedance | 75ohm | | Format | IEC60958-3(S/PDIF) | | OPTICAL | | | Connector | TOS(JEITA RC-5720C) | | Format | IEC60958-3(S/PDIF) | | PHONES | | | Connector | 6.3mm(1/4“) stereo phone jack | | Maximum output level | 20mW + 20mW or more(THD+N 0.1% or less, into 32ohms loaded) | | Power | AC120V, 60Hz (U.S.A./Canada)
AC230V, 50Hz (U.K./Europe)
AC240V, 50Hz (Australia) | | Power consumption | 15W | | Dimensions | 481(W) x 94.5(H) x 298(D)mm | | Weight | 5.2kg (11.5 lb) | | Operating temperature | 5˚C - 35˚C | | Inclination of installation | 5˚ or less | | Backup Memory Items | Elapse time / Title display setting (CD), Playback mode (CD), Program (when loaded), Current folder (when CD loaded), Current source, Repeat playback function setting (ON/OFF), Pitch control (ON/OFF, CD) Pitch control value (CD) | | Standard accessories | Wireless remote controller（RC-CD200iL）, AA battery x2, Rack mounting screw, Warranty card, Owner's manual |
| Audio performance | | Frequency response | 20Hz-20kHz, +/-1dB(playback, JEITA) | | Distortion | 0.01% or less (during playback, JEITA) | | S/N ratio | 90dB or more(playback, JEITA) | | Dynamic range | 90dB or more(playback, JEITA) | | Channel separation | 90dB or more(playback, JEITA) |
| The 2 RU American Audio UCD-100 MKIII is a single CD/MP3 media player designed for a variety of applications including restaurants, bowling centers, roller rinks, gyms, retail outlets, houses of worship, and mobile entertainers. The UCD-100 MKIII provides two USB ports for playing digital music files from hard drives, MP3 players, and thumb drives. Additional features include anti-shock playback, pitch control, key lock, and seamless loop, as well as RCA and balanced XLR outputs. The American Audio UCD-100 MKIII includes a wireless remote control and ships with a power cord.
General Features
- 19" rackmount single CD/MP3 player with easy-to-use digital record function
- Plays MP3, CD, CD-R and CD-RW discs
- Bright LCD display shows track name when a MP3 disc is played
- Includes infrared remote control with volume control and other features
- 2 USB music inputs (1 on front, 1 on rear) for external music sources (hard drive, MP3 players, thumb drives)
- XLR balanced outputs on rear (send audio signal directly to powered speakers)
- RCA outputs
- USB record to MP3 format (128 kbps)
- Seamless loop
- Auto and manual BPM counter
- +10 track advance button
- Mechanical anti-skip protection
- Quick MP3/CD recognition
- Pitch (CD Source): Hyper Pitch (+/-4%, +/-8%, +/-16%, +/-100%)
- Pitch (MP3 Source): (+/-4%, +/-8%, +/-16%)
- Tempo lock
- Single/Continue mode and Time Remaining/Time Gone-By viewing
- Frame search
- Jog wheel controller
- Record to MP3
- Includes American Audio Database Builder Program (PC only)
Remote Control Features
- Volume control
- Folder search
- Track search
- Mute
- Key lock
- Play, Pause, Stop buttons
- Seamless loop control
- Source selection
- Eject button
- Record button
| Compatibility |
MP3, CD, CD-R and CD-RW discs |
| Outputs |
Balanced: 2 x XLR
Unbalanced: 2 x RCA |
| Power |
Multi-Voltage Power Supply: 100 to 240 VAC, 50/60 Hz
Power Consumption: 13 W |
| Dimensions (L x W x H) |
19.0 x 10.8 x 3.5" / 482.6 x 273.1 x 88.9 mm |
| Weight |
10.0 lb / 4.5 kg |
|
The CMP30 is a All-in-one audio source device which accommodates three different kinds of audio sources into one single device. it combines a CD-Player, MP3 player and AM/FM tuner into one single rack space 19・E housing. On the front a CD slot, a USB slot and a SD/MMC memory card slot are provided. This makes it possible to play regular audio CDs as well as MP3 files from either CDs, USB memory sticks or SD/MMC memory cards. There are two separate stereo outputs provided on the rear side, one for the CD & MP3 player while the other one is used for the AM/FM tuner. Because of these two separate stereo outputs, these two devices can operate simultaneously. This feature can be useful for Multi-Zone systems where multiple audio input devices are required. An rs232 control port makes the operation possible from external control devices such as home automation systems from AMX and crestron. ![]()
- Model name: AUCMP30
- Control: RS232
- Mounting: 19"
- Unit Height: 1U
- Power Supply: 240 V AC / 50 - 60 Hz
- Dimensions (W x H x D): 483 x 44 x 380 mm
|
Reviews
There are no reviews yet.