Content |
For users of just about any TASCAM multitrack, the RC-30P is a wonderful timesaver. Punching in on recordings by hand means you're not ready to play right away. The RC-30P lets you play straight through. While automated punch-ins available on some recorders are also helpful, most punches can be done with the simple and efficient precision of the RC-30P, saving you time.
|
Specifications General | Recording media | | CompactFlash (CF) card | File system | | FAT32 | Recording format | | BWF (Monophonic, Polyphonic) | Number of channels | | 8 channels (44.1/48/88.2/96 kHz) 8 channels + stereo mix (44.1/48 kHz) 4 channels (176.4/192 kHz) | Quantization bit rate | | 16/24 bit | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | Reference clock | | Internal, Word In, Video In, Digital In (AES 1-8 IN, AES A-BIN, ADAT 1-8 IN) | Type of timecode frame | | 23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF | Limiter | | Attack time: 3 ms Release time: 300 ms Threshold: –5 dBFS Ratio: 32:1 | Analogue audio inputs and outputs | The error for nominal and maximum levels is ±1dB for all input and output jacks except the PHONES jack. | ANALOG INPUT (1-8) | | D-sub 25-pin | Input impedance | | 10 kOhm | Nominal input level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | ANALOG INPUT (L/A, R/B) | | XLR-3-31 (1: GND, 2: HOT, 3: COLD) | Input impedance | | 10 kOhm | Nominal input level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum input level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | ANALOG OUTPUT (1-8) | | D-sub, 25-pin | Output impedance | | 100 Ohm | Nominal output level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | ANALOG OUTPUT (A/B) | | XLR-3-32 (1: GND, 2: HOT, 3: COLD) | Output impedance | | 100 Ohm | Nominal output level | | When reference level is –9 dB: +6 dBu (1.55 Vrms) When reference level is not –9 dB: +4 dBu (1.23 Vrms) | Maximum output level (selectable) | | +15 dBu (4.36 Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), + 22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms) | PHONES connector | | 6.3-mm standard stereo jack | Maximum output power | | 45 mW + 45 mW or more (THD+N 0.1 % or less, into 32 Ohm) | Digital audio inputs and outputs | DIGITAL IN/OUT (AES/EBU) | | D-sub, 25-pin | Minimum input voltage | | 2 Vpp | Maximum input voltage | | 7 Vpp | Output voltage | | 2–5 Vpp | Format | | AES3-2003/IEC 60958-4 (AES/EBU) | DIGITAL I/O (ADAT) | | ADAT optical | Format | | ADAT | DIGITAL INPUT A-B | | XLR-3-31 | Input voltage | | 2–7 Vpp at 110 Ohm | Format | | AES3-2003 (AES/EBU) | DIGITAL OUTPUT L-R | | XLR-3-32 | Output voltage | | 2–5 Vpp at 110 Ohm | Format | | AES3-2003 (AES/EBU) | Other inputs and outputs | RS-422 | | D-sub, 9-pin | RS-232C | | D-sub, 9-pin | PARALLEL | | D-sub, 25-pin | CASCADE IN | | BNC | Input voltage | | TTL equivalent (5 V) | Input impedance | | 75 Ohm ±10 % Allowable frequency deviation of external synchronization: ± 100 ppm | CASCADE OUT | | BNC | Output voltage | | TTL equivalent (5 V) | Output impedance | | 75 Ohm ±10 % | Sampling frequency | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | TIME CODE IN | | BNC | Input voltage | | 0.5–5 Vpp | Input impedance | | 20 kOhm | TIME CODE OUT | | BNC | Output voltage | | 2–5 Vpp | Output impedance | | 600 Ohm ±10 | WORD/VIDEO IN | | BNC | Input voltage | | TTL equivalent (5 V) | Input impedance | | 75 Ohm ±10 % Allowable frequency deviation of external synchronization: ± 100 ppm | WORD/VIDEO THRU/OUT | | BNC OUT/THRU switch included (OUT is for WORD OUT only) | Output voltage | | TTL equivalent (5 V) | Output impedance | | 75 Ohm ±10 % | Sampling frequency (when using WORD) | | 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz (47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up) | ETHERNET | | RJ45 | Keyboard | | Mini-DIN (PS/2) | USB | | USB A-type, 4-pin | Protocol | | USB2.0 HIGH SPEED (480 Mbit/s) | Audio performance (analogue input to analogue outp | Frequency response | | | 20 Hz - 20 kHz | | ±0,5 dB (all sampling rates) | at 40 kHz | | +0,5 dB/–2 dB (Fs = 88.2/96 kHz) | at 80 kHz | | +0,5 dB/–5 dB (Fs = 176.4/192 kHz) | Distortion | | ≤0.005% (Reference level: –20 dB, input level: +23 dBu, 1 kHz, AES-17LPF) | S/N ratio | | ≥100 dB(A) (22 kHz LPF) | Power requirements and other specifications | Power requirements | | 100–240 V AC, 50–60 Hz | Power consumption | | 26 W | Dimensions (W x H x D) | | 483 mm x 88 mm x 288 mm | Weight | | 4.8 kg | Operating temperature range | | 5–35 °C |
|
The DP-24SD Digital Portastudio is a 24-track workstation, allowing eight tracks of simltaneous recording. The built-in mixer includes everything you need for a professional-sounding mix, from EQ and reverb to amp simulation and multi-band mastering effects. The Digital Portastudio series creates finished productions without the need for a computer, instead using a simple-to-use control surface to keep you creative.
For clear display of your mix, the DP-24SD has a large color LCD displaying tracks, meters, and effects parameters. A set of 12 encoders control EQ, effects sends, and panning. Built-in effects include compression, guitar amp modeling, delay, reverb, with a total of 10 effects processirs available during mixing.
Eight XLR mic/line inputs each provide phantom power for condenser microphones, switchable in banks of four. One input includes an instrument-level impedence switch for direct input recording of guitar or bass. Balanced monitor outputs and effects sends are also provided on the rear panel. A USB output allows tracks and mixes recorded to your SD card to be transferred to a computer for CD burning or sharing online.
For a complete music production on a desktop, there's no simpler choice than the DP-24SD.
DP-24SD SPECIFICATIONS Recording Media | SD (512MB – 2GB) / SDHC card (4GB – 32GB) | File System | SD card:FAT16 / SDHC card:FAT32 | INPUT A-H
| | XLR
| | Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), Balanced | Input impedance | 2.4k ohms | Nominal input level | -14dBu | Maximum input level | +2dBu | TRS
| | Connector | 6.3mm(1/4“)TRS phone jack, Balanced | Input impedance | 22k ohms or more
/ 1M ohms(when INPUT H, GUITAR selected) | Nominal input level | +4dBu | Maximum input level | +20dBu | STEREO OUT
| | Connector | RCA pin-jack, Unbalanced | Output impedance | 200 ohms | Nominal output level | -10dBV | Maximum output level | +6dBV | EFFECT SENDS | | Connector | 6.3mm(1/4“)TS phone jack, Unbalanced | Output impedance | 200 ohms | Nominal output level | -10dBV | Maximum output level | +6dBV | MONITOR OUT | | Connector | 6.3mm(1/4“)TRS phone jack, Balanced | Output impedance | 200 ohms | Nominal output level | -2dBu | Maximum output level | +14dBu | PHONES
| | Connector | 6.3mm(1/4“)stereo phone jack | Maximum output level | 70mW + 70mW (THD+N 0.1% or less, 32 ohms loaded) | USB | | Connector
| USB Mini-B type 4-pin | Format | USB2.0 High-Speed mass-storage class | REMOTE
| | Connector
| 2.5mm TRS jack | Power | Dedicated AC adapter (TASCAM GPE248-120200-Z, included) | Power consumption | 12W (when phantom power supplying) | Dimensions | 514(W)×100.4(H)×336.9(D)mm / 20.2“(W)×4.1“(H)×13.4""(D) | Weight | 6.2kg / 13.67 lb | Accessories | AC adapter, 4GB SD card, warranty card, owner's manual |
Audio performance | Frequency response | 20Hz to 20kHz (+/-1dB, INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) | S/N Ratio | 90dB or greater (INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) | THD | 0.01% or less (INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) |
Operating system requirements | Windows | | OS | Windows XP, Windows Vista, Windows 7, Windows 8 | CPU | Pentium 300MHz or more | Memory | 128MB or more | USB | USB2.0 | Macintosh | | OS | Mac OS X Snow Leopard(V10.6), OS X Lion(V10.7), OS X Mountain Lion(V10.8), OS X Mavericks(V10.9) | CPU | Power PC, iMAC, G3, G4 266MHz or more | Memory | 64MB or more | USB | USB2.0 |
|
Designed for Windows based Pro Tools systems, the affordable Digidesign Pro Tools Custom Keyboard WIN let users work faster in their Pro Tools environment by providing direct access to primary transport and editing functions.
The Digidesign Pro Tools Custom Keyboard use the same symbols and color coding system built into the keyboards on the ICON D-Control worksurface and the other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards. The Digidesign Pro Tools Custom Keyboard provides plug-and-play USB connectivity and offers a fresh new look at a lower price than ever before. The keyboard also supports a PS-2 connection for maximum compatibility.
Digidesign Pro Tools Custom Keyboard WIN Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Windows - PS-2 connection cord and USB adapter for easy connection with either method
|
The DNRP-WRC provides two button record control and visual status indication of a connected Denon® DN-F450R/F650R recorder.
The mouse sized unit, once connecte to the recorder using its integral 5 metre lead, can be placed in a convenient location on a board/ meeting room table to allow the recording of conferences and discussions. Visual indication of recorder status is provided by high brightness red and green indicators located around the RECORD button, which show STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE. The two button control allows the recorder to be placed into record mode, create a new record mark and stop the recording process.
The DNRP-WRC is primarily for the simple control of audio recording in areas where conversations, discussions or conferences are taking place. The unit allows the DNF450R/F650R recorder to be placed out of sight to prevent media tampering or access to all the recorder controls.
- Simple unobtrusive controller for the recording of audio in board/meeting rooms
- Easy connection to Denon DN-F450R/F650R recorder serial (RS232) port
- Provides bright visual indication of STOP, PLAY, PLAY PAUSE, PLAY F.FWD, PLAY F.REV, CARD ERROR, RECORD and RECORD PAUSE
- RECORD and STOP buttons allow simple control without the need to access the recorder
- Ergonomic visually pleasing design with internal weight to prevent table slip
- Ultra low power consumption, no need for additional power adaptor
- Fully sealed label provides protection against drink spills
|
Work faster in your Pro Tools® environment with direct access to primary transport and editing functions. This affordable Digidesign® Pro Tools Custom Keyboard uses the same symbols and color coding system built into the ICON D-Control™ worksurface and other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards.
With functionality specific to Mac systems, the keyboard features plug-and-play USB connectivity.
Features
- Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
- Based on Apple Mac G5 Pro Keyboard
- Two USB ports and USB connection cord
System Requirements
- Digidesign-qualified Mac-based Pro Tools|HD®, Pro Tools LE™, or Pro Tools M-Powered™ system. (Note that some key commands are available only with Pro Tools HD software or with the DV Toolkit™ 2 option for Pro Tools LE.)
|
Reviews
There are no reviews yet.