TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality. Included with the TM-80 are […]
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.
Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 – 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 – 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
Weight
2.50 kg
Reviews
There are no reviews yet.
Be the first to review “TASCAM TM-80 Condenser Microphone” Cancel reply
TASCAMʼs TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminum diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.
Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 - 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
TM-80 SPECIFICATIONS
Microphone capsule assembly features an 18mm pure aluminum diaphragm
Cardioid polar pattern
Frequency response: 20Hz to 20kHz
Sensitivity : -38dB +/-2dB (0dB=1V/Pa at 1kHz)
Phantom power requirement: 9 - 48V DC
Output impedance : 200ohm +/-30% (at 1kHz)
Load impedance : >1k ohm
Max SPL : 136dB (at 1kHz=1% THD)
S/N ratio : 77dB
Housing : Die cast zinc
Dimensions (W×H×D): 48mm×165mm×48mm / 1.9 inch×6.5 inch×1.9 inch
Includes : shockmount, mini desk stand, mic cable (1.8m XLRM – XLRF)
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
* THD of the microphone amplifier at an input voltage which is equivalent to the capsule output voltage at the specified SPL.
A/B, X/Y, and M/S stereo recording
Ambience recording
Grand piano, woodwind and brass instruments
Percussions
Drums
Classical music recording
Studio applications
Rode's new NTK has the quality and warmth demanded from a tube mic.
With the large 1 in. capsule gold-plated membrane and twin triode tubes
(hand graded and selected), Rode is again setting the standard for value.
This is a tube mic designed exclusively for recording professionals who
want what only the best can offer.
Features:
Dynamic range of 47dB
Ultra low noise of only 12dB
Internal capsule shock mounting
Cardioid polar pattern
20Hz - 20kHz frequency response
Includes a power supply, 30 ft. cable, and stand adapter
Technical Description:
Capsule: Externally polarised 1 in. pressure-gradient condenser
Active Electronics: Unity-gain closed-loop impedance converter;
vacuum-tube input with bipolar buffering
Pickup Pattern: Cardioid
Frequency Response: 20Hz - 20kHz (+/-6dB)
Output Impedance: 200 ohms (100 ohms per leg)
Sensitivity: -38dB re 1V/Pa (12mV @ 94dB SPL) +/-1dB
Equivalent Noise: 12dB SPL (A-weighted per IEC268-15) +/-2dB
Maximum Output: > +29dBu (@ 1kHz, 5% THD into 1k (load)
Dynamic Range: > 147dB (A-weighted, per IEC268-15)
Maximum SPL: > 158dB SPL (@ 1kHz, 5% THD into 1k (load)
Signal/Noise Ratio: > 82dB (A-weighted, per IEC268-15)
External power supply: 100-120V/200-240V AC (user selectable)
50Hz/60Hz, 25VA maximum
Packed Weight: 4.53 kg (Mic only 760 gm)
Accessories included:
Power Supply
30 ft (10 m) Multicore Cable
M2 Standmount plus 3/8-5/8 in. Thread Adapter
Optional Extras: SM2 Shockmount
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
13 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent noise level, CCIR1)
23 dB
Equivalent noise level, A-weighted1)
12 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL)
71 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL)
82 dB
Maximum SPL for THD
110 dB
Maximum SPL for THD
129 dB
Maximum output voltage for THD
-1 dBu
Dyn. range of the mic. amplifier /A-weighted, 0.5 %2))
98 dB
Dyn. range of the mic. amplifier /A-weighted, 5 %2))
117 dB
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Current consumption (P48, IEC 61938)
3.2 mA
Matching connector
XLR 3F
Weight
825 g
Diameter
78 mm
Length
165 mm
1) According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.