Content |
The TXD-12M is a compact passive two-way wedge monitor enclosure designed for use in a wide variety of live sound, fixed installation and mobile DJ applications that require professional sound quality in an easily transportable format.
It consists of a 12" reflex-loaded low frequency driver and a 1" high frequency compression driver on a 40°H x 70°V dispersion HF horn in an optimally tuned enclosure. These high grade components are matched with an internal third order passive crossover network to ensure a seamless transition between the HF and LF drivers.
The crossover network incorporates a twostage thermal overload protection system which prevents damage to the high frequency driver, reacting instantly to large transient peaks while still allowing wide dynamic range to be maintained. Although the protection system is transparent at normal operating levels, as the level increases the signal is gradually and imperceptibly reduced once the critical threshold has been reached.
The cabinet is constructed from 15mm (5/8“) birch plywood, screwed and glued together for maximum rigidity. Its symmetrical shape allows the monitor to be inverted and used as left/right mirror image pairs.
In addition to its primary function as a floor monitor, the TXD-12M is also suitable for front-of-house applications and can be used with the integral pole mount socket on top of optional 35mm poles and loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying, and eight rubber feet are fitted. A grey powdercoated perforated steel mesh grille protects the drive units from damage.
A Neutrik Speakon NL4MP speaker connector is located at each end of the cabinet on recessed panels, providing input and parallel connections to additional TXD series monitors.
Full specifications
Net Weight 18kg (39.6lbs)
Dimensions 435mm x 553mm x 288mm (17.1" x 21.8" x 11.3“)
Components 1 x 12" (305mm) LF driver, 1 x 1" (25mm) HF compression driver
Frequency Response 65Hz - 20kHz ±4dB
Dispersion 40°H x 70°V @ -6dB points
Power Handling 300 watts r.m.s., 600 watts program
Recommended amplifier power 600 watts @ 8 ohms
Sensitivity 97dB, 1 watt @ 1 metre
Maximum SPL 122dB continuous, 128dB peak
Impedance 8 ohms
Crossover Internal passive network at 1.8kHz; 12dB/octave high-pass, 12dB/octave low-pass
Construction 15mm (5/8“) birch plywood enclosure. Finished in black semi-matt textured paint. Two recessed carrying handles. Integral pole mount socket
Grille Heavy duty powder coated perforated steel mesh
Connectors (2) Neutrik Speakon NL4MP, wired pin1+: positive, pin 1-: negative, pins 2+ and 2- N/C
Spares & Accessories LS-1219 12" (305mm) LF loudspeaker
RC-1219 Recone kit for LS-1219
CD-111 1" (25mm) HF compression driver
RD-111 Replacement diaphragm for CD-111
MG-121/X Metal grille
PX-121/X Passive crossover network
|
Features : Compact and low-profile for minimal obstruction of audience sight-lines. 70°x 70° nominal coverage. Bi-amplified or full-range passive operation. Pole socket for applications requiring pole or tripod mounting. High power handling, low distortion Vented Gap Cooling™ LF driver. 3 in. (diaphragm) neodymium magnet compression driver. Rugged DuraFlex™ coated enclosures sized to be truck pack friendly. 14-Gauge steel grille lined with acoustically transparent cloth. Specifications : Frequency Range ( –10 dB) : 50 Hz-20 kHz Frequency Response (± 3 dB) : 75 Hz-20 kHz Coverage Pattern : 70˚ × 70˚ nominal Sensitivity (1W/1m) : 95 dB Power Rating (Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W (Continuous/Program/Peak) Rated Maximum SPL : 130 dB SPL Peak Nominal Impedance : 8Ω Input Connectors : Two NL4 Operational Modes : Full Range/Bi-Amp Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm (22.5" x 13.4" x 10.4“) Net Weight : 19 kg ( 42 lbs) User's Manual
|
Description:
Following in the tradition of the original 12MX, the 10MX offers most of the same features but in a more compact enclosure. Due to its unique cabinet geometry, the 10MX is at home either on the stage as an extremely low profile stage monitor, or as a main, medium duty, front of house speaker. Adamson's Acoustic Waveguide is employed in the 10MX and its integral pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. The 10MX carries on the tradition of multi-purpose versatility.
Applications:
Extremely Low Profile Stage Monitor Arrayable Front of House Enclosure Theater Houses of worship Corporate
Features:
Unique Cabinet Geometry Adamson AX10 Low Frequency Driver 1" High Frequency Compression Driver Passive Operation Adamson Acoustic Waveguide Durable Dual Component Finish Roadworthy Construction
Weight: 22 |
Description
The MON 15 A G3 is part of an entirely newly developed family of powered stage monitors for high performance. The MON G3 Series incorporates the advanced technology and premium materials found in high-end monitors typically rented by professionals, making this quality available to everyone. These include, for example, advanced coaxial loudspeakers with integrated 50° x 90° CD horn, which ensure the acoustic ideal of a true point source and thus outstanding audio characteristics even at short listening distances. Besides this, the series offers a high-level of robustness, a comprehensive set of features and the elegant LD Systems design.
A maximum sound pressure level of 129 dB and superior bass reproduction make the MON 15 A G3 the best choice for loud band stages, as a drum fill or for stand-alone use as a compact front PA without an additional subwoofer. For a 15" stage monitor, it is unusually compact and elegant, so despite its impressive performance data, it blends harmoniously into the stage set.
Both the signal (XLR/jack combo) and the power connection (PowerCON compatible) can be looped through. This allows for elegant, tidy cabling in multi-monitor set-ups or for distributed sound reinforcement.
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 129 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 15" woofer with 3" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front griller
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
122 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
129 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
58 - 18000 HZ
Frequency response (-10 dB)
48 - 20000 Hz
Crossover frequency
1300 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
75 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Chassis Size 304.8 mm (12“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Frequency Response (-3 dB) 65 - 16000 Hz Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 98 dB Max. SPL/1m (calc) 129 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer DL12ST Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 8.2/10.5 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 584 mm (22.99“) Width 449 mm (17.68“) Depth 313 mm (12.32“) Weight Net 21.9 kg (48.28 lbs) |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Reviews
There are no reviews yet.