WHARFEDALE EVP-X15PM Powered Version For EVP-X12P: 300W(RWS)/500W(PEAK)

Discontinued

466.24 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
EVP-X15PM: powered version for EVP-X12P: 300W(RWS)/500W(PEAK) 2 Channel mixer; high/low EQ control; Balanced line output SYSTEM TYPE: 15” 2-way monitor – FREQ RESP +/ – 3 DB: 50Hz – 20kHz – FINISH MATERIAL: Black carpet – TRIPOD STAND BOTTOM: No – TRIPOD STAND TOP: No – INPUTS: INPUT A: Line level input / INPUT B: […]

 

Read more

EVP-X15PM: powered version for EVP-X12P: 300W(RWS)/500W(PEAK)
2 Channel mixer; high/low EQ control; Balanced line output
SYSTEM TYPE: 15” 2-way monitor – FREQ RESP +/ – 3 DB: 50Hz – 20kHz
– FINISH MATERIAL: Black carpet – TRIPOD STAND BOTTOM: No –
TRIPOD STAND TOP: No – INPUTS: INPUT A: Line level input / INPUT
B: NA – SPEAKER LEVEL INPUT: NA – INPUT CONNECTORS: INPUT
A: Combined Jack and XLR / INPUT B: NA – INPUT SENSITIVITY: MIC:
5mV / RCA: 0.5V / LINE: 0.775V – INPUT IMPEDANCE: MIC: 470
OHMS / LINE INPUT A: 47K / LINE OUTPUT TYPE: Balanced Male XLR
connector – LINE OUTPUT HIGH PASS FILTER: MAIN EQ: 5 band
graphic EQ – ACTIVE CROSSOVER: NA – PHASE SWITCH: NA –
POWER SECTION-AMPLIFIER POWER, CONTINUOUS: 400W –
PEAK: 600W – EXTENSION SPEAKER OUTPUT: 1 – PROTECTION
TYPE: Dynamic/AGC – POWER ON INDICATOR: Green LED – SYSTEM
DYNAMIC AGC: Orange LED – ENCLOSURE – DIMENSION MM
(HXWXD): 645X445X473.5 – WEIGHT (NET) KG: 27.4 – WEIGHT
(GROSS) KG: 30.5

Weight 27.40 kg

Reviews

There are no reviews yet.

Be the first to review “WHARFEDALE EVP-X15PM Powered Version For EVP-X12P: 300W(RWS)/500W(PEAK)”

Your email address will not be published. Required fields are marked *

Quick Comparison

WHARFEDALE EVP-X15PM Powered Version For EVP-X12P: 300W(RWS)/500W(PEAK) removeRCF NX M10-A 750W 10" ACTIVE TWO-WAY MONITOR 750W removeRCF NX M12-A 750W 12" ACTIVE TWO-WAY MONITOR 750W removeRCF ST12-SMA ACTIVE STAGE MONITOR removeALESIS STRIKE-AMP-12 Active Speaker E-drum monitor removeInvotone DSX12CMA remove
NameWHARFEDALE EVP-X15PM Powered Version For EVP-X12P: 300W(RWS)/500W(PEAK) removeRCF NX M10-A 750W 10" ACTIVE TWO-WAY MONITOR 750W removeRCF NX M12-A 750W 12" ACTIVE TWO-WAY MONITOR 750W removeRCF ST12-SMA ACTIVE STAGE MONITOR removeALESIS STRIKE-AMP-12 Active Speaker E-drum monitor removeInvotone DSX12CMA remove
Image
SKUEVP-X15PMNXM10ANXM12A13000460G04AE00000INT00010
Rating
Price 466.24 incl. GR VAT 1,209.00 incl. GR VAT 1,395.00 incl. GR VAT1,008.00 incl. GR VAT 409.00 incl. GR VAT 399.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

EVP-X15PM: powered version for EVP-X12P: 300W(RWS)/500W(PEAK)
2 Channel mixer; high/low EQ control; Balanced line output
SYSTEM TYPE: 15” 2-way monitor - FREQ RESP +/ - 3 DB: 50Hz - 20kHz
- FINISH MATERIAL: Black carpet - TRIPOD STAND BOTTOM: No -
TRIPOD STAND TOP: No - INPUTS: INPUT A: Line level input / INPUT
B: NA - SPEAKER LEVEL INPUT: NA - INPUT CONNECTORS: INPUT
A: Combined Jack and XLR / INPUT B: NA - INPUT SENSITIVITY: MIC:
5mV / RCA: 0.5V / LINE: 0.775V - INPUT IMPEDANCE: MIC: 470
OHMS / LINE INPUT A: 47K / LINE OUTPUT TYPE: Balanced Male XLR
connector - LINE OUTPUT HIGH PASS FILTER: MAIN EQ: 5 band
graphic EQ - ACTIVE CROSSOVER: NA - PHASE SWITCH: NA -
POWER SECTION-AMPLIFIER POWER, CONTINUOUS: 400W -
PEAK: 600W - EXTENSION SPEAKER OUTPUT: 1 - PROTECTION
TYPE: Dynamic/AGC - POWER ON INDICATOR: Green LED - SYSTEM
DYNAMIC AGC: Orange LED - ENCLOSURE - DIMENSION MM
(HXWXD): 645X445X473.5 - WEIGHT (NET) KG: 27.4 - WEIGHT
(GROSS) KG: 30.5

The NX M10-A is the most compact and lightweight speaker of the NX range.

It is specifically designed as a versatile tool from stage monitoring to a very accurate near field sound reproduction.
From live sound to playback music the NX M10-A guarantees high performances and is superior to many larger speakers thanks to the high efficiency of its 10” neodymium transducer.

Acoustical Specifications
Frequency Response -3 dB:50 Hz÷ 20 kHz
Max SPL:129 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:70° 
Compression Driver:1" neo, 1.75" v.c. 
Woofer:10" neo, 2.5" v.c 
INPUT/OUTPUT SECTION
Input signal:bal / unbal 
Input connectors:Combo xlr-jack 
Output connectors:xlr 
Input sensitivity:-2 dBu / +4 dBu 
PROCESSOR SECTION
Crossover frequencies:1700 Hz 
Protections:Thermal, rms 
Limiter:Soft peak limiter 
Controls:Volume, side / floor, contour 
AMPLIFIER SPECIFICATIONS
Total power:750 Watts 
High frequencies:250 Watts 
Low frequencies:500 Watts 
Cooling:Convection / forced 
Connections:Powercon in / out 
CABINET
Cabinet Material:Balitc birch 
Hardware:6 x fly tracks 
Handles:2 side 
Pole Mount/Cap:Yes 
Colour:Black 
PHYSICAL SPECIFICATIONS
Height:515 / 20.27 mm/inch 
Width:334 / 13.14 mm/inch 
Depth:337 / 13.26 mm/inch 
Net Weight:15.2 / 33.5 Kg/Lbs

 

The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.

It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.

Features
750 Watt Digipro digital amplifier
130 dB max spl
90 x 40, Wide dispersion constant directivity angle, rotatable horn
12" woofer, high power neodymium 3" voice coil
1" HF driver, titanium dome, neodymium 1.75" voice coil
PFC power factor correction

 

Acoustical Specifications
Frequency Response -3 dB:50 Hz÷ 20 kHz
Max SPL:130 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:40° 
Compression Driver:1" neo, 1.75" v.c. 
Woofer:12" neo, 3" v.c. 
INPUT/OUTPUT SECTION
Input signal:ba l/ unbal 
Input connectors:Combo xlr-jack 
Output connectors:xlr 
Input sensitivity:-2 dBu / +4 dBu 
PROCESSOR SECTION
Crossover frequencies:1700 Hz 
Protections:Thermal, rms 
Limiter:Soft peak limiter 
Controls:Volume, side / floor, contour 
AMPLIFIER SPECIFICATIONS
Total power:750 Watts 
High frequencies:250 Watts 
Low frequencies:500 Watts 
Cooling:Convection / forced 
Connections:Powercon in / out 
CABINET
Cabinet Material:Balitc birch 
Hardware:6 x fly tracks 
Handles:2 side 
Pole Mount/Cap:Yes 
Colour:Black 
PHYSICAL SPECIFICATIONS
Height:646 / 25.43 mm/inch 
Width:385 / 15.15 mm/inch 
Depth:375 / 14.76 mm/inch 
Net Weight:21.2 / 46.73 Kg/Lbs

 

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.

APPLICATIONS
  • • Main vocal stage monitor
  • • High-output drum or keyboard monitor
  • • Sidefill monitor for small- to medium-scale applications
  • • Rental companies
  • • Professional musicians

General Specs

800 Watt Peak, 400 Wat RMS
129 dB max SPL
45 Hz - 20 kHz frequency response
12" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil

Acoustical Specs

Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 12“, 2.5" voice coil

Inputs/Outputs

Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female

Processor Section

Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter

Amplifier Specifications

Total power: 800 W PEAK
High frequencies:200 W PEAK
Low frequencies: 600 W PEAK
Total power: 400W RMS
High frequencies:100 W RMS
Low frequencies: 300 W RMS

Cabinet Specs

Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black

Size/Weight

Height: 318/12.51 mm/inch
Width: 594/23.38 mm/inch
Depth: 400/15.74 mm/inch
Net Weight: 18/39.68 kg/lbs

- 1000w RMS, 2000w peak,  power delivers clarity, punch and more than enough headroom for any - performance or practice space - Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds - with precise, full response across the entire frequency range without any artificial colouration - (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator - XLR output to link another Strike Amp 12 or send your performance to another input device - Lightweight and flexible tilt-back cabinet design that can also be pole-mounted - Contour EQ switch to control your sound - Ground-Lift switch eliminates unwanted noise


Specifications:

  • Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
  • Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
  • High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
  • Crossover Frequency: 2.0KHz
  • Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
  • Frequency Response: 53Hz – 20kHz (+3dB)
  • Frequency Range: 46Hz – 22kHz (-10dB)
  • Horn Coverage 90o horizontal x 60o vertical (nominal)
  • Equalisation: Contour switch with low- and high-frequency +3dB boost


Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input

  • Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
  • Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
  • Protection: Electronic clip, thermal & transducer overdrive
  • Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
  • Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
  • Consumption: 800W
  • Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille

Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg

12” active coaxial monitor
350W class D+ 65W class AB
FR: 60Hz-20kHz
Max SPL: 121dB
Input level: LINE -6dBu
12” coaxial woofer with 1” driver
Protection: Thermal/Convection fan/Overload/limiter/compression

 

The INVoTONE DSX series is a brand new cabinet line in the premium segment. The speakers are characterized by their accurate and balanced sound. Even very high sound pressure levels are reached. The speakers are comparable in every respect with high-priced branded products, just not in the price! In addition to the acoustic and technical qualities, this series is also mechanically equipped with all the professional features that are common in this segment. "- Monitor and Coaxial 12" subwoofers up to 2x15 "2-way floorstanding speaker and a 18" subwoofer Currently, our product range includes compact 12 arrived.

 

Power


350Watt RMS Biamp
Frequency range (-10dB)60Hz-20kHz
Maximum SPL @ 1m121dB
Radiation (HxV)70 ° x 70 °
Components12 "woofer, 1" HT-driver coaxial system
ConnectorsINPUT jack combo / OUTPUT XLR male balanced link.
Input LevelLine -6dBu
Control switchesVolume Control, Ground Lift, monitor / FOH preset switchable ON / OFF
Protection circuitstemperature controlled fan, limiter, compressor
HousingMDF with durable black textured lacquer, metal front grille, rubber feet, wooden handles, Hochständeflansch
Dimensions(HxWxD) 313mm x 393mm x 513mm
Weight14KG

 

 

 

Weight27.40 kg17.00 kg25.00 kg18.00 kg17.00 kg15.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 27.40 kg
Weight 17.00 kg
Weight 25.00 kg
Weight 18.00 kg
Weight 17.00 kg
Weight 15.00 kg