ALESIS ELEVATE-3 Active Monitor Speakers (Pair)

Alesis Elevate 3 studio speakers enable you to listen to mixes, masters and multimedia content with impressive clarity and warm, full sound. Built using technology adopted from Alesis' award-winning Monitor One and M1Active professional studio monitors, Elevate 3 studio speakers are the perfect way to upgrade your computer or mobile device experience.

Elevate 3 speakers bring out every detail of your sound, unencumbered and crystal clear. Their custom wooden cabinets have a dense construction that provides natural bass. You'll also have the ability to increase power and bass extension by connecting an optional powered subwoofer.

Packaged in stereo-matched sets, Elevate 3 studio speakers give you everything you need, all in one box.

Elevate 3 studio speakers contain powerful, three-inch woofers, crisp, one-inch silk-dome tweeters and dedicated power. Alesis engineers carefully selected and tuned these crucial components to work in concert as a single unit within the custom wood cabinet to deliver full lows, clean highs and a detailed compelling stereo image. Magnetic shielding ensures that you'll never have to worry about placement or interference with displays, TVs and other electronic equipment. And unlike passive speakers, Elevate 3 speakers have a volume knob built right in to the front panel for easy control.

Alesis has been creating studio monitors for nearly a quarter century. In that time, we've learned a thing or two about maximizing sound and sonic clarity. Elevate 3 speakers leverage Alesis' experience in designing studio loudspeakers by employing custom-designed wood cabinets that stay natural and neutral, regardless of the frequency content or volume.

A pair of rugged RCA jacks is onboard, perfect for connecting mixers, interfaces, and virtually any other piece of audio gear. A 1/8-inch stereo connection gives you the ability to switch to headphones easily at anytime, and connecting the speakers is just as easy, requiring just one standard 1/8-inch cable (included). If you're frequently on the move, Elevate 3 is the speaker for you: they feature a built-in power supply so they'll work worldwide with no wall-wart power supply to lose!

Elevate 3 studio speakers are designed to produce natural frequency response. But if you need a little more low-end punch, a convenient bass-boost switch does the trick. And if you need even more power and low-end extension, Elevate 3 features a subwoofer output compatible with virtually any powered subwoofer.

Trust your sound to the clarity, precise design and premium performance of Alesis Elevate 3 studio speakers.

Key Features:

• Precise audio amplification for project studios, video playback, gaming and mobile devices
• Separate high- and low-frequency drivers with crossover
• High-fidelity amplification with 60-watt peak power
• Custom wooden cabinets with dense construction for full, warm sound
• Carefully formed baffle radiuses reduce edge diffraction
• Magnetic shielding for desktop use next to computer monitors, displays, TVs and other electronic equipment
• Flexible I/O and worldwide power options
• Dedicated subwoofer output for use with virtually any powered subwoofer

• (2) Elevate 3 Speakers
• Audio Cable
• Interconnection Cable
• Power Cable
• Quickstart Guide
• Safety & Warranty Manual

Specs:

• Audio Inputs: RCA
• Interconnection: 1/8“
• Subwoofer Output: 1/8“
• LF Driver: 3-inch
• HF Driver: 1-inch, silk dome
• Power, peak: 60W
• Power, continuous: 10W x 2
• Front Baffle Thickness: 15mm
• Magnetically Shielded: yes
• Frequency Response: 80-20,000 Hz
• Voltage: Universal input switch mode power supply

Features of the HR824mk2 Studio Reference Monitor:

- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included

PRICE PER UNIT

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)