BoxTel is a very small analog telephone hybrid, which can be easily connected to the most popular of mixing consoles in the market. BoxTel features a high-tech ( heart ). In addition to automatic line compensation, it provides transformer balanced audio connections and both local and remote control capabilities. BoxTel does not require AC Main […]
BoxTel is a very small analog telephone hybrid, which can be easily connected to the most popular of mixing consoles in the market. BoxTel features a high-tech ( heart ). In addition to automatic line compensation, it provides transformer balanced audio connections and both local and remote control capabilities. BoxTel does not require AC Main voltage: power comes directly from the telephone line. This interesting feature together with its compact dimensions make BoxTel a highly recommended equipment for live broadcasts in addition to studio applications.
Main features:
– Balanced audio input (jack 6.3 mm) with level control
– Balanced audio output (jack 6.3 mm) with level control.
– 2 wire interface with parallel connection to an external telephone set
– Remote and direct control of line hooking and incoming call signalling functions
– Automatic line compensation
– Internal buzzer on/off
– Powered by telephone line
AUDIO PROGRAM IN / OUT
Connectors Jack stereo 6.3 mm,.
Input impedance 4 KOhm (transformer bal)
Output level * -inf to + 7 dBm
Output impedance 2 KOhm (transformer bal)
Noise on Receive output less than – 80 dBm (DIN noise)
Send / Receive separation less than 20 dB**
LINE INTERFACE
Connector RJ11
Nominal input level – 6 dBm
Nominal output level – 6 dBm
Compensation mode electronic
Impedance 600 Ohm
GENERAL DATA REMOTE INTERFACE
Power Supply Powered by telephone line Ext signaling for incoming call optocoupled
Dimension 44 x 106 x 114mm Remote line hooking relay closure, ext. powered
Weight 430 g
* nominal line level : – 6 dBm
** it can vary depending on characteristics of telephone line
All measurements are intended at 1 kHz.
Weight
0.50 kg
Reviews
There are no reviews yet.
Be the first to review “Axel Technology Boxtel- Basic Telephone Hybrid” Cancel reply
Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
New gate timing algorithms ensure the smoothest release characteristics
Program-adaptive expander/gates
Great sounding dynamics control for any type of program material
Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
Stereo or dual-mono operation
Balanced inputs and outputs on 1/4" TRS and XLR connectors
Side Chain insert
Classic dbx® "Auto" mode
Content
BoxTel is a very small analog telephone hybrid, which can be easily connected to the most popular of mixing consoles in the market. BoxTel features a high-tech ( heart ). In addition to automatic line compensation, it provides transformer balanced audio connections and both local and remote control capabilities. BoxTel does not require AC Main voltage: power comes directly from the telephone line. This interesting feature together with its compact dimensions make BoxTel a highly recommended equipment for live broadcasts in addition to studio applications.
Main features:
- Balanced audio input (jack 6.3 mm) with level control
- Balanced audio output (jack 6.3 mm) with level control.
- 2 wire interface with parallel connection to an external telephone set
- Remote and direct control of line hooking and incoming call signalling functions
- Automatic line compensation
- Internal buzzer on/off
- Powered by telephone line
AUDIO PROGRAM IN / OUT
Connectors Jack stereo 6.3 mm,.
Input impedance 4 KOhm (transformer bal)
Output level * -inf to + 7 dBm
Output impedance 2 KOhm (transformer bal)
Noise on Receive output less than - 80 dBm (DIN noise)
Send / Receive separation less than 20 dB**
LINE INTERFACE
Connector RJ11
Nominal input level - 6 dBm
Nominal output level - 6 dBm
Compensation mode electronic
Impedance 600 Ohm
GENERAL DATA REMOTE INTERFACE
Power Supply Powered by telephone line Ext signaling for incoming call optocoupled
Dimension 44 x 106 x 114mm Remote line hooking relay closure, ext. powered
Weight 430 g
* nominal line level : - 6 dBm
** it can vary depending on characteristics of telephone line
All measurements are intended at 1 kHz.
GENERAL DATA
Power Supply 220 / 110V 25 VA
Dimension 434x351x44mm (1 rack unit)
Weight » 4 Kg
MEETING INTERFACE IN / OUT
Connector DB 9 female
Nominal in / out audio level 0 dBm
Input impedance 600 W / 10 KW (selectable)
Output impedance 100 W
* nominal line level: - 6 dBm
** it can vary depending on characteristics of telephone line
All measurements are intended at 1 kHz.
AUDIO PROGRAM IN / OUT
Connectors XLR, electr. balanced
Input impedance 600 W / 10K W (selectable)
Output level * - ¥ ¸ + 16 dBm
Output impedance 100 W
Noise on Receive output
2-Wire separation £ 25 dB**
4-Wire separation £ 70 dB
2-WIRE SECTION
Connector RJ11
Nominal input level - 6 dBm
Nominal output level - 6 dBm
Compensation mode Electronic, transf. decoupled
Impedance 600 W
4-WIRE SECTION
Connector Terminal block
Impedance 600 W
Nominal TX level 0 dBm
Nominal RX level 0 dBm
Compressos Expander Gate Kimiter DBX 166XS Stereo
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Specifications
Input Connectors
1/4" TRS, female XLR (pin 2 hot)
Input Impedance
>50kΩ balanced, >25kΩ unbalanced
Max Input
>+24dBu, Balanced or Unbalanced
Input Type
Electronically balanced/unbalanced, RF filtered
Sidechain
1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
Sidechain Impedance
Tip = >10kΩ (Input), Ring = 2kΩ (Output)
Sidechain Max Input Level
>+20dBu (tip/input); >+20dBu (ring/output)
Output Connectors
1/4" TRS, female XLR (pin 2 hot)
Output Impedance
120Ω balanced, >60Ω unbalanced
Max Output
+21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω)
Frequency Response
20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain
Noise
Product Features:
Ultra-high resolution 24-bit/96 kHz mastering processor featuring 32/40-bit floating-point DSP technology Audiophile 24-bit/96 kHz A/D- and D/A converters offering 113 dB dynamic range 4 concurrently selectable EQ modules (31-band graphic EQ, 10-band parametric EQ, Feedback Destroyer plus 3 Dynamic EQs per stereo channel) Ultra-high resolution 61-band real-time FFT analyzer with additional auto EQ function for room and loudspeaker equalization Unique VPQ (Virtual Paragraphic EQ) option allows parametric control of graphic EQs State-of-the-art compressor/expander with peak limiter per stereo channel, additional stereo imager and stereo delay for delay line applications Multi-functional level meters (peak/RMS, VU and SPL meter with dBA/dBC weighting via RTA/Mic input) 64 user memories for complete setups and/or individual module configurations Separate mic/line input with phantom power for RTA and Auto-EQ applications Balanced inputs and servo-balanced outputs with gold-plated XLR connectors, stereo aux output, AES/EBU and S/PDIF inputs and outputs (XLR and optical) Professional Wordclock input and MIDI connections for full remote control, preset dumps and system updates Open architecture allowing future software updates via MIDI "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
The latest addition to the 10 Series product line, the dbx® 1074 QuadGate™, is the perfect companion to the 1066 and 1046. The 1074 offers 4 channels of gating with threshold, depth and release controls on each channel. The 1074, like the rest of the products in dbx 10 Series, is based on the legendary dbx V2 VCA and offers XLR inputs and outputs, and 1/4” side-chain input. In addition to an external key input per channel, the 1074 also has an internal filter that can be independently activated and controlled on a channel-per-channel basis. This filter allows the 1074 to not only clean up tracks, but gives you frequency selective control on each gate, to open exactly when you want it to. These features combined, make the 1074 an absolute must for those who require quad gating on applications including: Gating dry and percussive sounds such as snare drum and kick drum,gating sounds that have longer decay times such as cymbals and Pianos, gating hum or buzz from live instruments or recorded tracks or eliminating Headphone leakage into microphones. Gating instrument microphones to eliminate amplifier bleed.
From the company that has been redefining the standard of signal processing for more than 30 years, dbx® Professional Products comes a bulletproof product that caters to the scrutinizing needs of those who require the precision noise gating capabilities. Once again, the engineering staff at dbx® Professional Products have taken technology that has been over three decades in the making and have created a product that is flexible, versatile and rock solid in construction design. The 1074ʼs independent channel design with key filtering capabilities make it the perfect tool for countless applications.
Four independent channels of gating
Independent key filtering
Independent Threshold and Release controls
Differentially balanced gold-plated XLR and 1/4" inputs and outputs
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.