Dynamic clip microphone for drum miking The Opus 67 dynamic microphone has been designed for closemiking of drums such as Toms and Congas. The new patented microphone clamp allows easy mounting to the instrument.The flexible gooseneck ensures optimal positioning to suit both musician and sound engineer Features:Dynamic microphone for Toms and CongasVery high gain-before-feedbackHigh SPL […]
The Opus 67 dynamic microphone has been designed for closemiking of drums such as Toms and Congas. The new patented microphone clamp allows easy mounting to the instrument. The flexible gooseneck ensures optimal positioning to suit both musician and sound engineer
Features: Dynamic microphone for Toms and Congas Very high gain-before-feedback High SPL capability Unique double-spring clamp system Flexible gooseneck for optimum positioning Small, rugged construction for on-tour applications Supplied with storage bag
Technical Specifications: Transducer type: Dynamic Operating principle: Pressure gradient Polar pattern: Hypercardioid Open circuit voltage at 1 kHz: (0dB = 1V/Pa) 1.5 mV/Pa = -56 dBV Nominal impedance: 200 Ω Load impedance: > 1 kΩ Connector: 3-pin XLR male Length: 72 mm Gooseneck length Weight without cable: 140 g Frequency response: 40 – 12,000 Hz
Weight
0.20 kg
Reviews
There are no reviews yet.
Be the first to review “BEYERDYNAMIC OPUS 67 SUPERCARDIOID DYNAMIC MICROPHONE” Cancel reply
The Opus 67 dynamic microphone has been designed for closemiking of drums such as Toms and Congas. The new patented microphone clamp allows easy mounting to the instrument. The flexible gooseneck ensures optimal positioning to suit both musician and sound engineer
Features: Dynamic microphone for Toms and Congas Very high gain-before-feedback High SPL capability Unique double-spring clamp system Flexible gooseneck for optimum positioning Small, rugged construction for on-tour applications Supplied with storage bag
Technical Specifications: Transducer type: Dynamic Operating principle: Pressure gradient Polar pattern: Hypercardioid Open circuit voltage at 1 kHz: (0dB = 1V/Pa) 1.5 mV/Pa = -56 dBV Nominal impedance: 200 Ω Load impedance: > 1 kΩ Connector: 3-pin XLR male Length: 72 mm Gooseneck length Weight without cable: 140 g Frequency response: 40 - 12,000 Hz
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.
Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g
The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.
Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage
Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.