Content |
Dynamic clip microphone for drum miking
The Opus 67 dynamic microphone has been designed for closemiking of drums such as Toms and Congas. The new patented microphone clamp allows easy mounting to the instrument. The flexible gooseneck ensures optimal positioning to suit both musician and sound engineer
Features: Dynamic microphone for Toms and Congas Very high gain-before-feedback High SPL capability Unique double-spring clamp system Flexible gooseneck for optimum positioning Small, rugged construction for on-tour applications Supplied with storage bag
Technical Specifications: Transducer type: Dynamic Operating principle: Pressure gradient Polar pattern: Hypercardioid Open circuit voltage at 1 kHz: (0dB = 1V/Pa) 1.5 mV/Pa = -56 dBV Nominal impedance: 200 Ω Load impedance: > 1 kΩ Connector: 3-pin XLR male Length: 72 mm Gooseneck length Weight without cable: 140 g Frequency response: 40 - 12,000 Hz |
The e 902 is a dynamic cardioid instrument microphone, which was designed
for lowest bass signals with very high sound pressure levels.It is suitable for
kick drums, bass guitar-amps, tuba, and other bass instruments.
Features
Frequency response optimized for kick drum
Very fast attack
Exceptionally clean and clear pick-up of the deepest bass signals
Integral stand mount
Hum compensating coil
Shock mounted capsule
Robust metal body
Delivery Includes
e 902 microphone
Pouch
User Manual
Technical Data
Pick-up pattern cardioid
Frequency response 20...18000 Hz
Sensitivity in free field, no load (1kHz) 0,2 mV/Pa; (@ 60 Hz): 0,6 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 128,5 x 60 mm
Weight 440 g
|
The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.
The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.
Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.
A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments. | The Shure KSM141 is an end-addressed condenser microphone with mechanically switching dual polar patterns (cardioid and omnidirectional). Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns. Provides flexibility in a wide variety of recording applications
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM141 are listed below. Microphone use, however, is a matter of personal taste. The KSM141 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording | The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
Frequency Range |
40 Hz to 15 kHz |
Impedance |
150 Ohms |
Load Impedance |
310 Ohms |
Sensitivity |
56 dBV/Pa (Open Circuit Voltage, 1 kHz) |
Color |
Gray |
Mounting |
5/8"-27 Female, Mic Clip (Included) |
Construction Material |
Steel, Steel Wire Grille |
Dimensions |
ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm |
Weight |
10.02 oz / 284 g |
|
The supercardioid e 906 instrument microphone was especially designed for
guitar amplifiers, but it is also an excellent choice for percussion and brass
instruments.
Features
Lively, full sound
Very fast attack
Flat shape of microphone body perfect for guitar amps
Three adjustable sound characteristics (bright, normal, smooth)
Hum compensating coil
Rugged metal body
Delivery Includes
e 906 microphone
MZQ 100 clamp
Pouch
User manual
Technical Data
Pick-up pattern supercardioid
Frequency response 40...18000 Hz
Sensitivity in free field, no load (1kHz) 2,2 mV/Pa
Nominal impedance 350 Ohm
Min. terminating impedance 1000 Ohm
Dimensions 55 x 34 x 134 mm
Weight 140 g
|
Reviews
There are no reviews yet.