Content | • Easy to use
• No programming facilities
• Double preset
• Up to 36 channels
The Easy Fade 36 is a new and easy to use lighting desk. It is specially designed for those applications where users have to operate light which have no knowledge about DMX and programming such as schools, churches etc.
The Easy Fade 36 is a double preset desk which has two banks of 18 channels. The Desk can be used either as a double preset 18 channel desk or as a single preset 36 channel desk.
It is equipped with two Master faders and a grand master.
The Easy Fade 36 has no programming facilities in order to keep it simple to use for any user.
Specifications Power Supply: DC 12V 500mA
Power connector: Adaptor included
Scenes/Chases: 0
Run mode: Manual only
Patch mode: N/A
Output: DMX-512, 36 channels
Output connector: 3 pole XLR
Dimensions: 483 x 270 x 120 mm
Weight: 4 kg | DMX console able to control up to 6 channels. It allows to connect an external
power supply of 9 V DC o to operate with the built-in battery. It disposes of DMX
polarity switch.
Power Supply: 9V DC, 100 mA min
DMX Output: XLR 3 female connector
DMX Polarity: Conmutable +2, -3 o - 2, +3
Battery type: PP3 9V
Dimensions: 173 x 153 x 55 mm
Weight: 0.8 Kg |
Powerful theatre control for generic and moving lights, with a fast, easy to use interface.
For too long the creativity of lighting professionals has been stifled by the limitations and excessive cost of high end lighting control. The Illusion has been designed to challenge this status quo. Using leading edge technology, exceptional graphics and user definable modes of operation, the Illusion performs as a fast, effective lighting tool.
The addition of moving light control software to the Illusion makes it an exceptionally powerful controller with many features previously only found in more expensive consoles. The only limit on the number of moving lights available is the 512 DMX channels available. Three high resolution encoders allow for easy control of the moving light parameters. To facilitate ease of programming the Illusion makes use of palettes or focus groups for each type of LTP parameter. Building memories using palettes will ensure that changes to any palette are tracked through to the associated memories. Separate fade times can be set for parameters and for brightness channels allowing for exceptional flexibility in replaying shows. To further facilitate programming the Illusion has a powerful effects engine that allows for the creation of not only movement effects but also colour and beam effects. The comprehensive library of fixtures available ensures that the user can program any moving light. Fixture libraries are updated on a regular basis or it is possible to create your own unique fixture personalities using a free software tool. Programming moving lights is simple whether using the mouse and screen commands or using command line syntax. With powerful editing tools the desk allows users to track changes to memories forward and backwards or to change a single cue.
With 500 channels as standard, the Illusion features the phenomenally powerful Cueline system, which gives instant and clear graphical representation of the cue list allowing easy visualisation, operation and editing. The graphical user interface and memory stack are fully integrated. Modifications in the memory stack automatically update the Cueline system and vice versa. Using Cueline it is possible to create multipart cues that alter different parameters making the playback of moving lights intuitive and simple.Clear front panel controls can be configured to suit your preferred style of operation, with a choice of command line operation or full GUI. Powerful shortcuts, associations and macros can be set up to aid the programming operation whilst flexible linking and triggering operations make the replay of complex lighting sequences extremely simple. Multi-part cues, linked submasters, follow-ons, audio effects, channel groups and full LTP channel control can all be achieved without the need to search through endless menus or remember confusing key sequences.
Features
* 500 Control Channels * Up to 400 Memories * 108 Programmable Submasters * HTP & LTP Control * Go Button Playback * Two Manual Playbacks * Remote Triggering * Full Proportional DMX Patch to 512 Channels * Unique Cueline Interface * Multi-Mode Operation * Audio Effects * Palettes (Focus Groups) * Fixture libraries * Full Tracking * Parameter level programming * SMPTE, MIDI, DMX-IN and ChilliNet functionality available via optional kit |
24/48 channels of control in a tough, colourful package
The ?Frog? range of control desks builds upon the foundations of the Sirius and XL families using the latest technologies to bring new and improved features. As Zero 88 products, the Frog desks naturally retain the same ease of use, reliability and affordability as their predecessors. The Frog can control up to 48 generic channels, which may be manually or automatically patched to any of the 512 DMX channels. It is fitted with a floppy drive for loading and saving show data, a remote ?Go? port and an output for a monitor.Memories can be recorded as scenes or chases, each having its own fade times and modifiers. Memories may be played back with the crossfade master and the ?Go? button for sequential, pre-programmed shows. Extra flexibility is afforded through the 240 submasters allowing for the creation of lighting effects for the more spontaneous shows.
Features * 2 preset operation * DMX output with DMX Patch * 240 Submasters * Theatre style memory stack with up to 400 memories * Chase effects and Audio Effects * On board floppy disk drive * Video output * 48 control channels
|
A powerful controller for the more demanding applications.
Following the phenomenal success of the Frog range over the last three years Zero 88 have developed the Frog 2 - a new console which takes the Frog philosophy of ease of use and value for money to a whole new level.Frog 2 will add a new dimension to the current Frog range of consoles. Designed to be used in the most demanding environments requiring lighting control the Frog 2 will appeal to users looking for ease of programming, comprehensive playback choices, live busking or stand alone control of architectural type events. The Frog 2 can control up to 2048 channels of DMX. DMX connection is either through traditional 5 Pin XLR connectors or via Ethernet. All the facilities needed for future RDM and ACN compatibility are included in the hardware.To allow for effective control the Frog 2 offers multiple cue stack playback, comprehensive palette selections and effects libraries. The use of macros allows for the automatic programming and playback of shows.For busking in live environments there are 2000 user definable buttons and 1000 faders that can be assigned to control anything from a single channel to a group of fixtures to a complete memory. Using macros these controls can be loaded from a memory or from a cue stack as part of the running of a show. Comprehensive feedback is provided via two monitors and an onboard touch screen. It is also possible to display up to nine different sets of information simultaneously. It is possible to define specific user views to allow each user to have an operational environment best suited to their needs. Storing shows is possible on either a USB memory stick or using the built in CD writer. There are 3 USB ports on the Frog 2 making it possible to use a variety of USB accessories including touch screen monitors. The mechanical design of the Frog 2 has ensured that it has the smallest footprint possible while ensuring all the controls are ergonomically accessible. It is also possible to operate the console while it is in its flight-case base without damaging any connectors.
Features
* 2048 Channels * 2 opto isolated 5 Pin XLR?s per universe * 4 universes of DMX * 200 Playback stacks * 1000 User definable faders * 2000 User definable buttons * Colour Touchscreen * 2 x SVGA Monitor ports * 3 x USB ports * CD Writer * Parameter level programming * Comprehensive effects engine * Auto Palettes * Ethernet connectivity * RDM and ACN hardware ready |
- Universal 6-channel DMX controller
- Battery operation possible
- External power supply included
- Rugged metal housing
The Cameo CLCONTROL6 is an especially compact DMX controller with 6 channels that is perfect for controlling small lighting systems. It can be mounted in many ways and of course can also be used as a freestanding unit; it is extremely easy to operate.
The CLCONTROL6 has 6 smoothly shifting faders for the individual DMX channels and a master fader. It can be powered using the included external power adapter or batteries and thus is universally useable for manual control of LED systems. A 3-pole XLR socket is used as the DMX output; a red LED serves as a power indicator. This straightforward lightweight impresses with clear functionality and high user friendliness.
Product type
DMX Mixers
Number of DMX channels
6
DMX output
XLR 3-pin female
Controls
6x channel faders , master fader
Indicators
power LED
Operating voltage
9 V block , External Power Supply
Operating voltage
9 - 12 V DC
Width
167 mm
Height
56 mm
Depth
134 mm
Accessories (included)
9 V block , AC Adapter , Power supply
Weight
1 kg |
Reviews
There are no reviews yet.