The HM 1000 is a microphone hanging module that accommodates capsules from the AKG Discreet Acoustic Modular series and provides for hanging them with a thin 33 ft. (10 meter) cable. The end of the cable is terminated with a mini-XLR connector which will pass through an 11-mm diameter opening and is subsequently plugged into the Discreet Power adapter (DPA). Using microphones flown from the ceiling to record music or speech in places of worship, conference rooms, or on theater stages is becoming more and more popular.
The HM 1000 operates over the range of 9 to 52 volts DC. A red LED power indicating ring at the capsule end of the cable tells the operating engineer that the system is receiving power. The LED is normally powered from phantom power, but can be operated by an alternative DC power source such as the AKG B18. The LED maybe extinguished by removing a jumper located inside the DPA. The DPA also contains a jumper-actuated low frequency roll-off below 250 Hz.
The HM 1000 is ideal in multiples for overhead choral pickup and is virtually invisible at typical distances. The capsule assembly may be set to any direction or angle by means of a flexible but stable wire as shown in the photograph. The cable is black, and the capsule assembly is matte gray.
Features:
- Hanging module with rugged thread connection and self-cleaning, gold plated contacts
- Compatible with 5 different AKG capsule modules CK 31, CK 32, CK 33, CK 47 and CK 80
- Integrated switchable LED indication
- Integrated bass roll-off
- Rugged design
- Non-reflective ray colour
- Included Accessories: Phantom power adapter, hanging clip
Specifications:
- Bass filter: 250 Hz, -10 dB at 50 Hz
- Impedance: =2,000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN/IEC
- Current consumption:
, completely mounted, without pushbutton or switch.
</p>
<ul><li>Diameter: 130 mm</li><li>Height: 35 mm</li></ul></td></tr></tbody></table></td><td>Bass filter 250 Hz, -10 dB at 50 Hz
Impedance =2,000 ohms
Supply voltage 9 to 52 V phantom power to DIN/IEC
Powering</td><td>
<ul><li>Programmable mute switch</li><li>High RFI (Radio Frequency Interference) immunity</li><li>Rugged construction</li><li>Compatible with all Modular Series capsules</li><li>Highly reliable contacts for capsule modules</li><li>Integrated LED ring status indicator</li><li>Integrated, switchable bass cut</li><li>Integrated, gold-plated XLR connector</li></ul>
<p>
The new GN ESP Series features a programmable mute switch to cover a wide range of applications. A bank of jumpers makes it easy to select the desired switch function for any application:
</p>
<ul><li>on/off</li><li>push-to-talk</li><li>push-to-mute</li></ul>
<p>
The mode selection jumpers are hidden inside the housing so they cannot be realigned unintentionally. An LED ring provides a clearly visible MIC ON/OFF indication. The bank of jumpers also allows the LED ring and the integrated bass rolloff filter to be enabled or disabled. In addition, the new electronic circuit design provides high immunity to radio-frequency interference.
</p>
<table><tbody><tr><td>Bass filter</td><td>250 Hz, -10 dB bei 50 Hz</td></tr> <tr><td>Impedance</td><td>=2,000 ohms</td></tr> <tr><td>Supply voltage</td><td>9 to 52 V phantom power to DIN/IEC</td></tr> <tr><td>Powering</td><td></td></tr></tbody></table></td></tr><tr class= "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.