Content |
Product Description
The FBT PSR 212m floor monitor features 13 ply Baltic Birch plywood construction cabinetry in a low profile design, internally braced to
prevent undesirable cabinet vibrations. A rugged touring grade scratch resistant black paint finish protects the cabinetsʼ exterior.
A heavy duty perforated steel grille provides protection for the coaxial speaker. An integrated carrying handle is built into the cabinet
providing easy transportability.
The FBT PSR 212 is of two-way bass reflex design incorporating a Italian manufactured 12” B&C Custom coaxial woofer with a 3” voice coil
with aluminum windings and a concentric 2.6” B&C titanium compression driver with a 1.4” exit. The PSR 212m floor monitors dispersion
factor is 80° x 80°. The internal crossover is constructed with a military grade dual flooded fiberglass circuit board utilizing military spec
components including metallized polyester condensers, and large diameter choke coils. All crossover components are embedded in a
special resin to ensure total imperviousness to vibrations in operation and shock transmitted by mechanical impacts when transporting. The
internal crossover allows either full range or bi amplified operation by means of a jumper located internally on the crossover unit on the
underside of the rear control panel input plate. This type of selectable crossover frequency design provides against accidental crossover
settings when either full range or bi amplified operation is desired. When used in full range operation, the internal crossover frequency is
preset at 1.6khz (24dB oct). Recommended amplifier power output when used in full range operation is 600w RMS total and 600 w RMS LF,
160 w RMS HF when operated in bi amp mode. A sensitivity factor of 99 dB applies in full range mode and 99 dB LF, 108 dB HF in bi amp
mode. Frequency response is an ample 60Hz – 18kHz.
The rear facing input panel provides 2 Neutrik® Speakon NL-4 female connectors. FBTʼs S.T.E.P.® (soft trip electronic protection) circuitry
ensures correct speaker operation even in overdriven conditions.
Specifications
System Type: 2 way Floor Monitor
Dispersion: 80° H x 80° V
Components: 12” B&C Coaxial woofer with concentric HF driver
Protection: FBT S.T.E.P.® Protection circuitry
Frequency Response: 60Hz - 18kHz
Inputs/Outputs: 2- Neutrik® Speakon
Nominal Impedance: 8 ohms
Cabinet Design: Asymmetrical
Power Handling: 600w RMS, 1200w Program (full range)
Enclosure Material: 13 ply Baltic Birch plywood
Sensitivity: 99 dB @ 1 watt, 1 meter (full range)
Dimensions: 21”w x 14.60” h x 20.80” d
Maximum SPL: 129dB (full range)
Net Weight: 55 lbs.
Internal Crossover Frequency: 1.6 kHz
Shipping Weight: 62 lbs.
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 12 M
Description For a band, monitors play an important role too. The classic
Description monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description 12 M monitor is designed without compromise exactly for this
Description application to provide the highest possible level of on-stage
Description performance.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 70 Hz ? 19 kHz
Frequency response @ -10dB 63 Hz ? 19 kHz
Speaker 1x 12?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Dimensions (WxHxD) 39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD) 15 1/4? x 21 3/4? x 15?
Weight 16 kg
Weight 35.2 lbs |
Features : Compact and low-profile for minimal obstruction of audience sight-lines. 70°x 70° nominal coverage. Bi-amplified or full-range passive operation. Pole socket for applications requiring pole or tripod mounting. High power handling, low distortion Vented Gap Cooling™ LF driver. 3 in. (diaphragm) neodymium magnet compression driver. Rugged DuraFlex™ coated enclosures sized to be truck pack friendly. 14-Gauge steel grille lined with acoustically transparent cloth. Specifications : Frequency Range ( –10 dB) : 50 Hz-20 kHz Frequency Response (± 3 dB) : 75 Hz-20 kHz Coverage Pattern : 70˚ × 70˚ nominal Sensitivity (1W/1m) : 95 dB Power Rating (Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W (Continuous/Program/Peak) Rated Maximum SPL : 130 dB SPL Peak Nominal Impedance : 8Ω Input Connectors : Two NL4 Operational Modes : Full Range/Bi-Amp Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm (22.5" x 13.4" x 10.4“) Net Weight : 19 kg ( 42 lbs) User's Manual
|
Chassis Size 381 mm (15“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Speaker Type Fullrange Frequency Response (-3 dB) 55 - 18000 Hz Frequency Response (-10 dB) 46 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 133 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer EVX155 Low Frequency Power Handling (Continuous/Program/Peak) 600 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 7.2/14.3 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 644 mm (25.35“) Width 457 mm (17.99“) Depth 340 mm (13.39“) Weight Net 28.4 kg (62.61 lbs) |
Chassis Size 304.8 mm (12“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Frequency Response (-3 dB) 65 - 16000 Hz Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 98 dB Max. SPL/1m (calc) 129 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer DL12ST Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 8.2/10.5 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 584 mm (22.99“) Width 449 mm (17.68“) Depth 313 mm (12.32“) Weight Net 21.9 kg (48.28 lbs) |
Reviews
There are no reviews yet.