| Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
| Code: |
37689 / 37906 White |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
200/50 W RMS |
| Built-in amplifier peak LF/HF: |
400/100 W |
| Frequency response: |
60Hz - 20KHz -6dB |
| Low Frequency woofer: |
8 - 1.7 coil inch |
| High Frequency driver: |
1 -1 coil inch |
| Maximum SPL cont/peak: |
120/124 dB |
| Dispersion: |
90° x 60° HxV |
| Input impedance: |
22 Kohm |
| Crossover Frequency: |
2.5 KHz |
| AC Power requirements: |
160 VA |
| Input connector: |
XLR - jack with loop |
| Power cord: |
5 / 16.4 m/ft |
| Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
| Net Weight: |
8.2 / 18.7 Kg/lb |
| Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
| Transport Weight: |
9.7 / 21.38 Kg/lb |
|
Features
- Powered 2-way, full-range system
- 8″ bass loudspeaker
- Compression driver with titanium diaphragm
- Multiple mounting options
- Stand mountable
The DR-508A is powered full-range system that uses a new 8” low frequency transducer. The M-34 compression driver handles high frequency reproduction.
The 1000 W peak power Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the DR-508A one of the smallest and most powerful portable cabinets on the market.
Technical Data
| Nominal Amplifier Power | 1000 W peak, 500 W continuous
Class D, Biamplified | | Frequency Range (-10 dB) | 60 Hz-20 kHz | | Rated Peak SPL at 1 m | 122 dB | | Dispersion | 90º x 45º | | Enclosure Material | Polypropylene | | Color/Finish | Black | | Connectors | IN: Female XLR
LOOP THRU: Male XLR
AC IN: powerCON | | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | | Current Draw (1/3 power @ 230 V) | 1.2 A | | Dimensions (H x W x D) | 45 x 30 x 30 cm
18 x 12 x 12 in | | Weight | 11.4 kg (25.1 lb) |
| - PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg |
8’’ bi-active two way plastic speaker with Media Player
- Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
- Woofer 8’’ VC 1,5”
- Driver 1’’ VC 1”
- Line output XLR OUT + ¼” JACK OUT
- Line input XLR IN + 2 x RCA
- Mic input XLR IN + ¼” JACK IN
- Rms power AB class 120 + 30 W
- Peak power 300W
- Frequency response 60hz-20khz
- Peak spl 123 dB
- Power supply AC110V/AC230V
| PROEL V-8-PLUS 8“
Specifications :
- System type : 2-way vented enclosure
- High Frequency Device :1” neodimyium compression driver
- Low Frequency Device :8” woofer with 1.5” voice coil
- Angular Coverage : 90° H x 60° V
- Total peak power : 400 W
- HF Amplifier Continuous Power :50 W Class AB
- LF Amplifier Continuous Power : 150 W Class D
- Power Supply :SMPS
- Processing Analog
- Frequency Response : 70 Hz - 20 kHz
- Max SPL :121 dB
- Connectors IN: COMBO, LINK: XLR M
- Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector
- Monitor Taper : 45°
- Flying System : 4 x M8 - top/bottom
- Construction : Polypropylene
- Cabinet Colour : Black
- Handles : 1 x top
- Mounting Pole : 1 x bottom
- Power Supply : 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
More Specs
- 2-way bi-amped loudspeaker system
- 1” NEODYMIUM compression driver
- Constant coverage 90° x 60° horn
- High-excursion 8” woofer with 1.5” VC
- 400 W Class D power amplifier with SMPS
- Integrated active processor with dual LIMITER circuit
- MIC/LINE input with 2-band EQ
- Front LED with ON or SIGNAL/CLIP selection
- SPL MAX: 121 dB
- Frequency response: 70 Hz - 20 kHz
- Ultra-lightweight reinforced polypropylene cabinet
- Top handle for effortless transport
- Slanted shape for the use as a stage monitor
- Four M8 flying points
- 7 kg total weight
- Dimensions (W x H x D) 280 x 422 x 263 mm
|
| Frequency response (-3 dB) 1 |
60 Hz to 20 kHz |
| Frequency range (-10 dB) 2 |
50 Hz to 20 kHz |
| Max. SPL 3 |
121 dB |
| Coverage angle (H x V) |
100° x 100° |
| Amplifier rating |
400 W |
| LF transducer |
8 in. woofer - ferrite magnet |
| HF transducer |
1 in. titanium dome, neodymium magnet, ferro-fluid cooled |
| Crossover frequency |
2.5 kHz |
| Connectors |
2 - XLR/TRS Combo
1 - 3.5mm Stereo
1 - Charge port
1 - TRS footswitch
1 - 12 V DC power output |
| Enclosure |
Polypropylene |
| Grille material |
Powder coated steel |
| USB charging |
1.5 A max., device-dependent |
| Color |
Black & white |
| Dimensions (H x W x D) |
400 mm x 275 mm x 272 mm
15.75 in. x 10.83 in. x 10.71 in. |
| Net weight |
7.6 kg
16.8 lb |
| Shipping weight |
11 kg
24.3 lb |
| Power consumption 4 |
100 - 240 V~, 50 - 60 Hz, 0.8 - 0.6 A |
| Battery capacity |
86.4 Wh |
| Battery run time (at max output) 5 |
6+ hours |
| Battery run time (at moderate output) 6 |
12+ hours |
1 Full space measurement using music DSP preset.
2 Half-space measurement.
3 Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
4 Current rating is 1/8 power.
5 Maximum output before loudspeaker limit indication, with typical program material.
6 Moderate output is approximately 95 dB SPL, with typical program material.
|
Reviews
There are no reviews yet.