Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
| The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: white
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
| MASTER AUDIO SB200B 2-way Active Speaker2-way 8\'\'+1\'\' 150Wrms
- 2-way BI-AMPLIFIED speaker box
- Power output 150 W RMS
- ABS box
- Woofer 8“, paper cone
- Compression driver, 1" titanium diaphragm
- Frequency response : 30Hz-20KHz
- SPL(1W/1m) : 108±2 dB
- Dimensions (H x W x D) : 365 x 245 x 200 mm
- 9 kg
|
Features
- Powered 2-way, full-range system
- 8″ bass loudspeaker
- Compression driver with titanium diaphragm
- Multiple mounting options
- Stand mountable
The DR-508A is powered full-range system that uses a new 8” low frequency transducer. The M-34 compression driver handles high frequency reproduction.
The 1000 W peak power Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the DR-508A one of the smallest and most powerful portable cabinets on the market.
Technical Data
Nominal Amplifier Power | 1000 W peak, 500 W continuous
Class D, Biamplified | Frequency Range (-10 dB) | 60 Hz-20 kHz | Rated Peak SPL at 1 m | 122 dB | Dispersion | 90º x 45º | Enclosure Material | Polypropylene | Color/Finish | Black | Connectors | IN: Female XLR
LOOP THRU: Male XLR
AC IN: powerCON | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | Current Draw (1/3 power @ 230 V) | 1.2 A | Dimensions (H x W x D) | 45 x 30 x 30 cm
18 x 12 x 12 in | Weight | 11.4 kg (25.1 lb) |
|
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
|
All-in-one portable PA system with full Bluetooth connectivity. Incredibly simple to set-up and use - no technical background required. 40 Watts of powerful, high-quality sound for audiences of up to 250 people. Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc. . Connect your iPod, iPhone, iPad or any other MP3 player via Bluetooth. High-quality dynamic microphone with cable included. "Wireless ready" for high-quality BEHRINGER digital wireless microphone system (not included). AC & battery operated with up to 12 hours continuous use per battery charge. 2 microphone inputs with individual volume control. Additional Aux input to connect to your CD player. Effective and extremely musical 2-band EQ for perfect sound tuning. Powerful 8" woofer and high-resolution tweeter driven by a Class-D amplifier. Retractable luggage-style handle & sturdy wheels provide effortless transport. Integrated stand mounting with 35 mm pole socket. Weight 9 kgr |
Reviews
There are no reviews yet.