| Content | Active speakers for live sound reinforcement and stage monitoring as well as distributed sound systems for clubs, music venues and corporate events. ART 315-A MK4 is the ideal speaker when an exceptional full range, outstanding bass reproduction and accurate high frequency delivery are required.
APPLICATIONS
- • Live sound
- • Playback and monitoring
- • Corporate events
- • AV presentations
- • Fixed installation
General Specs
o 800 Watt Peak, 400 Watt RMS bi-amplification
o 129 dB max spl
o DSP Processing with FiRPHASE
o 15" woofer, high power 2.5" voice coil
o 1" HF driver, mylar dome, 1.5" voice coil
Acoustical Specs
• Frequency Response -3 dB:45 Hz ÷ 20000 Hz
• Max SPL:129 dB
• Horizontal coverage angle:90°
• Vertical coverage angle:60°
• Compression Driver:1“, 1.5" v.c.
• Woofer:15“, 2.5" v.c.
Inputs/Outputs
• Input signal:bal / unbal
• Input connectors:xlr
• Output connectors:xlr
• Input sensitivity:-2 dBu/+4 dBu
• Mic. Input Sensitivity:-32 dBu
Processor Section
• Crossover frequencies:1800Hz
• Protections:Thermal, RMS
• Limiter:Soft Limiter
• Controls:Volume, Boost, Mic/Line
Amplifier Specificatios
• Total power:800 W PEAK
• High frequencies:200 W PEAK
• Low frequencies:600 W PEAK
• Total power:400 W RMS
• High frequencies:100 W RMS
• Low frequencies:300 W RMS
• Cooling:Convection
• Connections:VDE
Cabinet Specs
• Cabinet Material:Composite PP
• Hardware:4xM10 flying p.
• Handles:2 side, 1 top
• Pole Mount/Cap:Yes
• Colour:Black
Size/Weight
• Height:680 / 26.67 mm/inch
• Width:405 / 15.94 mm/inch
• Depth:345 / 13.58 mm/inch
• Net Weight:17.1 / 37.7 kg/lbs |
The DBR15 achieves best-in-class SPL of up to132dB and delivers the lowest frequency in its lineup. The DBR15 delivers outstanding performance for the main front-of-house sound for the live performance or DJ events that require highly prominent low and more power. |
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features :
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for
extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated
die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).
Optional DPCN (CobraNet?) digital audio input
module available.
Specifications:
|
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
|
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
|
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
|
Directivity Factor (Q) |
: |
15.85 |
|
Directivity Index (DI) |
: |
12 dB |
|
Maximum Peak Output1 |
: |
138 dB SPL 1m |
|
Transducer Section |
|
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
|
Bandpass
Nominal Impedance |
: |
4 ohms |
|
Mid/High
Frequency Section |
: |
|
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer |
|
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
|
Waveguide |
: |
JBL PT-K64-MHF |
|
Bandpass
Nominal Impedance |
: |
8 ohms
|
|
System |
|
|
|
DP2 Internal
Amplification Output
(at nominal load) |
: |
2200 Watts Peak,
1100 Watts Continuous |
|
DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance) |
: |
750LF/350HF Watts |
|
DP2 Output Section |
: |
2-Channel, Class I |
|
Audio Input connector: |
: |
XLR with loop-through |
|
Network
Control Connector |
: |
Ethernet, RJ45 |
|
Signal Processing |
: |
DSP Based, resident in
Input Module |
|
System Management
|
: |
DSP based limiters for mechanical
and thermal protection |
|
AC Power
Operating Range |
: |
Auto Select 90-132VAC/
216-264VAC, 50/60Hz
|
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%) |
|
AC Input Connector |
: |
Neutrik PowerCon |
|
AC Loop-Thru |
: |
Neutrik PowerCon |
|
AC Current Requirement |
: |
6A per system at 120V, 3A per
system at 240V |
|
Enclosure |
|
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.
|
|
Suspension System |
: |
6 standard air-cargo 3 in. track
and 12 M10 fittings
|
|
Grille |
: |
14 Gauge Black powder-coated
perforated steel with foam backing
|
|
Dimensions
(H x W x D) |
: |
914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in) |
|
Net Weight |
: |
44 kg (97 lb) | |
Specifications
- LF Amplifier Power (RMS): 1000 watts
- HF Amplifier Power (RMS): 250 watts
- Frequency Response (-3dB): 58-18000 Hz
- Frequency Response (-10dB): 50-20000 Hz
- Max. SPL/1m (calc); half space: 133 dB
- Coverage (nominal -6dB) Horizontal: 90°
- Coverage (nominal -6dB) Vertical: 50°
- LF Transducer: DVX3150
- HF Transducer: ND2
- Crossover Frequency: 1500 Hz
- Enclosure Material: Polypropylene
- Flying: Yes
- Input Connections: XLR
- Chassis Size: 15“
- Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
- Weight (net): 50.49 lbs
- Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
|
Product Features:
High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Reviews
There are no reviews yet.