| Content | Type Back Electret Condenser
Frequency Response 80~18,000Hz
Polar Pattern Supercardioid
Output Level(at 1,000Hz) -60±3 dB* (1mV)*0dB=1V /μbar
Impedance 220Ω
Max. SPL For 1% T.H.D. 125dB
Current Consumption ≤5.8mA
Output Connector XLR-M type(power module)
Power Supply 12-48 VDC Phantom power
Switch Push ON/OFF
Gooseneck Length 368mm
Base Dimension 96mm(W)*46mm(H)*113mm(D)
Net Weight 541 grams |
The 98H/C is wireless version of Shure\'s Beta 98 clip-on instrument mic, and is designed to work with the Shure beltpack transmitters. With the ability to handle high SPL, the Beta 98H/C is ready for the demands of brass, woodwind, and percussion, and features a flexible integrated gooseneck with clip-on clamp for secure fit and precise positioning. No external mounting hardware required.
Tech Specs
- Compatibility: All Shure w/TA4F (Tiny QG)
- Microphone Type: Condenser
- Polar Pattern: Cardioid
- Frequency Response: 20Hz-20kHz
- Max SPL: 143.5dB SPL
- Signal to Noise Ratio: 63dB
- Self Noise: 31dB (A weighted)
- Connector: TA4F (For Shure)
- Color: Black
- Cable Length: 10 ft.
- Weight: .1 lb.
- Manufacturer Part Number: WB98H/C
|
Features:
- Miniature cardioid condenser clamp-on microphone with shock mounted capsule
- Ideal for miking drums and percussions
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Integrated gooseneck
- Continuously adjustable vise type clamp
Recommended For:
- Drums
- Brass
- Recording
- Percussions
Standard Accessories:
- A400 adapter
- H518 Drum bracket
- Microphone bag
- W44 Windscreen
Specs:
- Polar pattern cardioid
- Frequency range 60 Hz to 20 kHz
- Sensitivity 5 mV/Pa (-46 dBV)
- Max. SPL 130/132 dB SPL (for 1%/3% THD)
- Equivalent noise level 31 dB(A)
- Signal/noise ratio (A-weighted) 63 dB
- Impedance = 2000 ohms
- Current consumption
|
AKG GN 30 OC., 12 inch gooseneck for D.A.M.-microphone capsules, 3/8“-connector, programmable indicator LED, incl. 10ft. cable to open-end, black, for installations |
- Cardioid polar pattern
- 10 m (33 ft.) cable
- 125° pickup angle
- Especially suited for choir recordings
- Integrated spring steel clamp for optimum alignment
The new CHM 99 Condenser Hanging Microphone provides both ease of use and a high level of functionality. There is hardly any more affordable and simpler solution for recording choirs at worship centers. Suspended from the ceiling or a beam, the hanging microphone is aligned and then fixed in the correct position. Now use the spring steel clamp to adjust the correct angle, and off you go!
The CHM 99 is available in white or black.
XY stereo recording
Using two CHM 99 hanging microphones in an XY configuration (coincident pair) is a good way to make stereo recordings, particularly of choirs. However, sound source locations are defined only by intensity differences. Adjusting the angle between the microphones determines the width and depth of the stereo image.
ORTF stereo recording
Developed by the French Broadcasting Authority, this technique differs from the XY technique by recording not only intensity differences, but also delay differences. The capsules are aligned at an angle of precisely 110° and 170 mm / 6.7 in. apart.
Polar pattern Cardioid
Frequency range 70 to 18,000 Hz
Sensitivity 18 mV/PA = -35 dBV re 1 V/Pa
Max. SPL 125 dB (for 1% THD)
Equivalent noise level 73 dB
Impedance =2,000 ohms
Supply voltage 9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering |
Recommended For:
- Brass
- Drums
- Percussions
- Woodwinds
Features:
- Miniature condenser clip-on microphone for wind instruments, drums, and percussions
- Miniature gooseneck for accurate microphone alignment
- Including wireless direct adapter for easy use with AKG pocket transmitters
- Detachable microphone cable
- Transducer shock mount for high mechanical-noise rejection
Standard Accessories:
- A400 adapter
- Microphone bag
- W44 Windscreen
Specs:
- Polar pattern cardioid
- Frequency range 60 Hz to 20 kHz
- Sensitivity 5 mV/Pa (-46 dBV)
- Max. SPL 130/132 dB SPL (for 1 %/3 % THD)
- Equivalent noise level 31 dB(A)
- Signal/noise ratio (A-weighted) 63 dB
- Impedance = 2000 ohms
- Current consumption
|
Reviews
There are no reviews yet.