Content |
Very high efficiency and good linearity are distinctive features of this mid-bass woofer.
Kapton forme voice coil, polycotton suspensions and treated cone guarantee the very high power handling of this transducer.
- 4-inch, fiberglass inside/outside copper voice coil
- 1200W continuous program power handling
- 99 dB Sensitivity
- 40 Hz – 2 kHz Frequency range
- M-roll damped surround
- Exponential damped cone
- Copper ring
GENERAL SPECIFICATIONS
- Nominal Diameter:380 / 15mm/inch
- Rated Impedance:8Ω
- Program Power:1200W AES
- Power handling capacity:600W AES
- Sensitivity:99dB
- Frequency Range:40Hz ÷ 2000 Hz
- Effective Piston Diameter:325 / 12.8mm/inch
- Max Excursion Before Damage (peak to peak):44 / 1.73mm/inch
- Minimum Impedance:9Ω
- Voice Coil Diameter:100 / 4mm/inch
- Voice Coil Material:Copper
- Voice Coil Winding Depth:16 / 0.6mm/inch
- Number of layers:2
- Kind of layer:inside / outside
- Top Plate Thickness:9 / 0.35mm/inch
- Cone Material:No pressed pulp
- Cone Design:Curved
- Surround Material:Polycotton
- Surround Design:M - roll
THIELE/SMALL PARAMETERS
- Resonance frequency:35Hz
- DC resistance:6Ω
- Mechanical factor:6
- Electrical factor:25
- Total factor:24
- BL Factor:23T · m
- Effective Moving Mass:91g
- Equivalent Cas air load:227liters
- Effettive piston area:083m²
- linear excursion (mathematical):5.8mm
- Voice - coil inductance @ 1kHz:7mH
- Half-space efficiency:75%
MOUNTING INFORMATION
- Overall Diameter:387 / 15.2mm/inch
- Bolt Circle Diameter:371 / 14.6mm/inch
- Bolt Hole Diameter:5 / 0.3mm/inch
- Front Mount Baffle Cut-out:358 / 14.1mm/inch
- Rear Mount Baffle Cut-out:362 / 14.2mm/inch
- Depth:138 / 5.4mm/inch
- Volume occupied by the driver:8 / 0.13liters/ft³
- Net Weight:3 / 24.9kg/lbs
SHIPPING INFORMATION
- Shipping weight:8 / 26.0kg/lbs
|
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
|
15" Speaker 300 W 8 Ohms
Recommended for professional audio as a woofer in sealed and vented enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
1.5 "
Voice Coil
38.1 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Section Diameter
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
148 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
maximum rated load
400 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6.35 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
35 Hz
Re (DC resistance)
6.32 Ohm(s)
Qms (mechanical quality)
8.1
Le (inductance of the voice coil)
1.1 mH
Qes (electrical quality)
0.63
Qts (overall quality)
0.58
Vas (equivalent volume)
334.6
Mms (moving mass)
60 g
BL (power factor)
11.5 T/m
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.35 mm/N
Sd (membrane area)
823.7 cm²
Weight
4,9 kg
| |
1200 W continuous program power capacity |
|
76 mm (3 in) copper voice coil |
|
40 – 2000 Hz response |
|
100.5 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Neodymium ring magnet allows a very high force factor and linear excursion |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
|
1400 W continuous program power capacity |
| 100 mm (4 in) copper voice coil |
| 40 – 2000 Hz response |
| 97 dB sensitivity |
| Double silicone spider with optimized compliance |
|
Reviews
There are no reviews yet.