| Content |
Designed for paging calls and general announcements, the PM-660D desk-top microphone comes with a large talk switch and a lock lever for easy and convenient operation. Its robust anti-vibration construction and balanced output render the microphone resistive to noise. In addition, the PM-660U microphone is equipped with a remote control switch (interlocked with the talk switch) for amplifier power on/off operation or chime activation.
| Type | Moving coil microphone | | Polar Pattern | Unidirectional | | Rated Impedance | 600 Ω, Balanced | | Rated Sensitivity | -58 dB (1 kHz, 0 dB=1 V/Pa) | | Frequency Response | 100 - 10,000 Hz | | Output | φ5.0 (φ0.2) | | Talk Switch | 1-push-to-talk switch, 1-locking lever, Short-off type | | Remote Control | 500 mA or less at 30 V DC | | Finish | Microphone head: Zinc plated steel wire, gray baked paint
Main unit: ABS resin, gray | | Dimensions | 100 (W) × 215 (H) × 150 (D) mm (3.94 × 8.46" × 5.91“)“ | | Weight | 440 g (0.97 lb) (cord excluded) | ※ Do not keep the lock lever placed in the locked state (ON position) for a long period of time.Doing so may cause poor conductivity in the lever switch due to deterioration with age, resulting in unit malfunction.
| Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence.
The Beta 57A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. A completely new grille design lets you take better advantage of proximity effect. The Beta 57A is an exceptionally versatile microphone. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
- Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
Suggested Applications
Guitar Amp
Bass Amp
Acoustic Guitar
Brass/Saxophone
Snare Drums
Rack/Floor Toms
Congas
Woodwinds
Lead Vocals |
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
| Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Features
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
| Type |
Dynamic (moving coil) |
| Frequency Response |
20 to 10,000 Hz |
| Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis |
| Output Level |
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL |
| The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
| Frequency Range |
40 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Load Impedance |
310 Ohms |
| Sensitivity |
56 dBV/Pa (Open Circuit Voltage, 1 kHz) |
| Color |
Gray |
| Mounting |
5/8"-27 Female, Mic Clip (Included) |
| Construction Material |
Steel, Steel Wire Grille |
| Dimensions |
ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm |
| Weight |
10.02 oz / 284 g |
|
- Unidirectional Dynamic Microphone
- Remote Chime Switch
- Mic ON/OFF Switch
- 2 Push Buttons for Easy Operation
| | | |
|
RM-01
| | Input Sensitivity / Impedance |
75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm
| | Frequency Response |
100Hz~18kHz
| | Type |
Moving Coil Dynamic
| | Directional Characteristic |
Unidirectional
| | Weight |
3lbs.
1.4kg
| | Dimensions |
3.5(W) X 1.8(H) X 5.2(D) inches
90(W) x 45(H) x 133(D) mm
| |
*Specifications and design subject to change without notice for improvements.
| |
|
Reviews
There are no reviews yet.