ACOUSTIC ENERGY AEGO P5 MKII 5.1 HIFI SYSTEM

System power: 5 x 125 watts for satellite speakers
Decoding: Dolby Digital, DTS and Dolby Pro-Logic II built in
Magnetically shielded
WxHxD (mm) / Weight: Satellites: 68 x 103 x 90
Subwoofer: 268 x 190 x 350
System controller: 228 x 145 x 59
Overall weight: 14.5 kg
Connections: 3 sets of line-level stereo inputs, 1 x coaxial digital input, 1 x optical digital input, 5 x speaker outputs, line-level subwoofer output
Controls: Volume/power level, input
Accessories: Supplied with wall-brackets for all satellite speakers, rubber feet for subwoofer, 2 x 5 metre, 2 x 10 meter and 1 x 3 metre cable runs, remote control batteries, connecting leads and power supplies
Remote control: handset and batteries supplied
Colour: Silver

Dimensions | (Metric) :25" W x 8-5/16" H x 16" D | 63.5 x 21.1 x 40.6 cm
Driver Complement :One cast basket 10" sub; Two cast basket 6-1/2" upper-bass/midrange drivers; One 1" pure aluminum dome tweeter
Frequency Response :19 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :150 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts (International)
Inputs :Three sets of five way binding posts: Triwireable; One full range low level RCA
Fuse :
Available Finishes :Piano-Gloss Black
Accessories :Feet (3)
Packaging :One to a carton
Weight | (Metric) :62 lbs | 28.1 kg
Warranty :5 Years; 3 Years for Amplifiers

The SR-8040HD is built to the same high performance standards as Definitiveʼs main left and right front speakers and includes features like high-definition second generation patented BDSS bass/midrange drivers with butyl rubber surrounds, wide-dispersion pure aluminum dome tweeters, complex crossover networks and rock-solid cabinet construction. It can be mounted to a wall with the integrated keyhole plate or it can be placed atop a shelf or after-market stand. However you use the SR-8040BP youʼll enjoy superior surround sound realism.

The Bipolar Advantage
Definitiveʼs SR-8040HD is a bipolar system containing two complete full-range speaker systems, one on each side of the cabinet. Bipolar radiation spreads the surround signals evenly throughout your room for a more enveloping sense of you-are-there realism than could be achieved with conventional forward-firing speakers.

The SR-8040HD is a full-range, extremely linear, low-distortion system which is timbre-matched to blend perfectly with all Definitive BP series speakers as well as other high-quality speaker systems. The SR-8040HD wide dynamic range, high-definition sound quality and its bipolar radiation pattern results in total immersion in the musical event or movie soundstage.

Bipolar Surrounds are Easy to Use
Definitive's bipolar surrounds are designed for easy and unobtrusive placement in your room. Easy-to-use mounting plates are included for wall mounting. Definitive's BP surround speakers may be located on the sides or rear of the room (or both as in 6.1 and 7.1 channel installations) with excellent results.

Patented Technology Delivers High Definition and Wide Dispersion
Dispersing the surround channel sound evenly over a broad area of the room is vital for creating the enveloping youʼre-in-the-action experience movie directors intend for you to experience. Weʼve engineered the SR models with our latest generation ultra-high definition midrange drivers that set new standards for wide dispersion and clean, accurate reproduction.

The drivers used in the SR-8040BP are 3-1/2" second generation BDSS drivers. BDSS is Definitiveʼs patented Balanced Double Surround System technology that supports the speaker cone at both the inner and outer edges allowing longer, more linear excursion for greater clarity and finely textured inner detail. A new patent pending Linear Response Waveguide™ smoothes off-axis frequency response and disperses sound over a wider area for crystal clear intelligibility and life-like envelopment for every listener in the room. The tweeters are pure aluminum domes, which has been heat-treated to relax the crystal structure and then coated with a ceramic to produce extended highs that reveal nuance and shimmer without a trace of edginess.

The Proof is in the Listening
Now that youʼre thoroughly impressed with the technology and passion weʼve poured into the SR-8040BP it is time to find a stocking dealer near you to audition this remarkable achievement of art and science.

Dimensions :9-1/2" H x 7-13/16" W x 5-3/8" D | 24cm H x 19.8cm W x 13.5cm D
Driver complement :2 each 3-1/2" BDSS drivers, 2 each 1" aluminum dome tweeters
Frequency response :50Hz - 30kHz
Sensitivity :92dB
Nominal impedance :8 Ohms
Recommended amplifier power :20 - 150 WPC
Inputs :One pair of 5 way binding posts
Weight :8 lbs. | 3.6kg
 

For the full cinema-like experience, the ultimate T Series system has the best of everything: T301s all round, supported by the same discreet high performance subwoofer. However big your living area, it envelopes you in an expansive, richly textured sound picture that brings a movie to life as youʼve never experienced before.

    T301 / T301c
Design     Two and a half-way closed box
Drive units     2 x 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 150 W
Sensitivity (2.83V/1m)     91dB (wall mount)
88dB (floor stand mount)
Maximum output (SPL)     110dB
Impedance     8Ω
Internal volume     1.4 Litres
Weight     1.5kg (3.3lbs)
Dimensions
(H x W x D)     600* x 140 x 35 mm
(23.6 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 600 x 35 mm
(5.5 x 23.6 x 1.4 in.)
Finish     Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.


      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Weight     13kg (28.6lbs)
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.

Frequency Response: C: 55 Hz - 35 KHz
L/R: 85Hz - 35KHz
Sensitivity (1W@1m): C: 90 dB
L/R: 87dB
Nominal Impedance: C: 8 Ohms
L/R: 8 Ohms
Power Handling Single (RMS): C: 100 W
L/R: 60 W
System Power Handling (RMS): C: 150 W
L/R: 100 W
Recommended Amplifier Requirements: C: 20 - 150 W
L/R: 10 - 100 W
Maximum SPL (dBA): 108
Bass Alignment: C: Bass reflex - front ported
L/R: Bass reflex - ported to the underside
Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver.
3 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 125 x 985 x 105 mm
(4 15/16 x 38 5/8 x 4 1/8)
Weight (each):
Kg (lbs) 8 (17 5/8)

User's Manual

      T101 / T101c
Design     Two-way closed box
Drive units     115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 100 W
Sensitivity (2.83V/1m)     90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL)     107dB
Impedance     8Ω
Internal volume     0.7 Litres
Weight     1kg (2.2lbs)
Dimensions
(H x W x D)     330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish     Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.


      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Weight     13kg (28.6lbs)
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.