Content |
HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.
MF unit
180mm mid range driver with 32mm coil, polymer chassis, high power, long-throw magnet system and lightweight alloy cone. Magnetically shielded.
LF unit
180mm bass driver with 32mm coil, polymer chassis, high-power, long-throw magnet system and lightweight alloy cone. Magnetically shielded.
Power Handling 200W max
Frequency response +/-6db 37Hz to 23kHz
Sensitivity 90.5 db/W
Impedance 8 ohms
Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. Full circumferential brace. High power, low turbulence bass reflex ports.
Terminals Gold-plated 2-way binding posts.
Weight
(excl. packaging) 18kg
Dimensions
Width 210 mm
Height 920 mm
Depth 395 mm |
Dimensions | Metric :46" H x 8-1/2" D x 5-1/2“W | 116.8 x 21.6 x 14.0 cm
Height with Base | Metric :47.5" | 120.7 cm
Base Dimensions | Metric :10-1/2" W x 14" D | 26.7 x 35.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" BDSS midrange drivers; One 5" x 10" long-throw racetrack subwoofer pressure coupled to two 5" x 10" long-throw racetrack radiators.
Frequency Response :16 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :93 dB
Recommended Associated Amplifier Power :20 – 250 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Internal Amplifier Power :300 watt
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
Inputs :One pair of 5 way binding posts; One LFE input (optional)
Fuse :3.2 amp 250 volt Slo Blo (US) | 2 amp 250 volt Slo Blo (International)
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Granite
Accessories :Plastic foot tippers; Isolation spikes
Packaging :One to a carton
Weight | Metric :54 lbs | 24.5 kg
Warranty :5 Years; 3 Years for Amplifiers
|
System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
The CM8 is an elegantly proportioned, slimmed down version of the award-winning CM9. A true three-way loudspeaker that will appeal to discerning customers who demand the very best sound quality, but have limited space in which to achieve it.
Like all the models in the CM Series, the CM8 uses crossovers of remarkable simplicity and quality, so what you hear is that much closer to the sound of the original recording. In its functional perfection and understated elegance, itʼs nothing less than a masterpiece. Pure and simple.
All CM Series speakers come with chrome driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, the highly polished gloss black or the new stylish white.
30-200watt 8 Ohm
Dimensions: 990x200x300
ALSO AVAILABLE IN ROSENUT AND WENGE COLOR
|
Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years
|
Reviews
There are no reviews yet.