Content |
Technical drawing - 85600 [209,5 KB]
Technical Inspection Agency report [655,3 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
The latest development in the Defender cable crossover series. This cable crossover
was developed in collaboration with suppliers for major events. The key feature of this
heavy-duty crossover is the two oversized cable/hose ducts for lines up to 120 mm,
and for fragile connections and connector housings not exceeding 100 mm.
Weight: approx. 25 kg to 27 kg
This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized cable / hose ducts for lines up to 120 mm, and for fragile connections and connector housings not exceeding 100 mm.
By usage in public traffic, please consider your country-specific road traffic regulations. - Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Lenght: 70 cm
- Width: 78.3 cm
- Height: 13.9 cm
- Channels: 2 + 2
- Material: PU (Polyurethane)
- Degree of Hardness: 88 Shore ± 4 A
- Flame Class: B2
- Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- Operating Range: -30°C up to +60°C
- DEKRA certified - Certified product safety
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
|
Defender XXL heavy duty cable and hose crossover Length: 75,00 cm Width: 70,00 cm
Height: 90 mm Channels: 5 Weight: 21,40 kg Material: PU (Polyurethane) Load bearing:
Approx 6 tons per typical tyre imprint (20x20 cm) The Cable-Crossover is oil, acid &
petrol resistant
Technical drawing - 85500 [178,5 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Together with the industry and leading rental companies we have developed our new flagship of the Defender series. 5 huge cable ducts, 3 of them are suitable for C-Tube hose as used by the fire brigade (Ø 62 mm). Power cables also have optimum protection. The load bearing actually surpasses the Defender III at more than 5 tons.
By usage in public traffic, please consider your country-specific road traffic regulations. - Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Length: 70.00 cm (with connectors 75,00)
- Width: 69.60 cm
- Height: 8.7 cm
- Channels: 5
- Width (Channels): 6,1 cm, 6,2 cm, 6,0 cm, 6,2 cm, 6,1 cm
- Height (Channels): 5,9 cm, 6,5 cm, 6,3 cm, 6,5 cm, 5,9 cm
- Material: PU (Polyurethane)
- Degree of Hardness: 88 Shore ± 4 A
- Flame Class: B2)
- Operating Range: -30°C up to +60°C
- Load bearing: Approx 6 tons per typical tyre imprint (20 x 20 cm)
- The Cable-Crossover is oil, acid & petrol resistant
- DEKRA certified - Certified product safety
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
|
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Blue pre-drilled Defender Midi cable crossover.
As it is the case with all crossovers of the DEFENDER series, the blue Defender cable crossover is oil, acid, and petrol resistant.
We recommend the use of our wheelchair ramp set including 3 Lines (6 ramp pieces) with the matching extremity pieces. These pieces must be used together with the blue pre-drilled Defender Midi cable crossover.
The drilling ensures that the ramp doesnʼt slide from the cable crossover. With this configuration the drive across zone is 80 cm wide. It is of course possible to extend the rampʼs width by using more lines.
DEKRA certified - Certified product safety
1 Set is composed of:
- 6 Ramp pieces (3 Lines)
- 4 extremity pieces (2 left extremities / 2 right extremities)
- 1 blue pre-drilled Midi cable crossover
Please note:
- The Defender Wheelchair Ramp does not support vehicle traffic.
|
End Ramp for 85160 Cable Duct 4-channel
End ramp for Defender Office
The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.
Product type
Cable Protector Accessories
Type
End Pieces
Material
polyurethane
Colour
Black
Length
90 mm
Weight
0,078 kg
|
Rubber matting cable cover - 10m x 1m roll Fine-grooved rubber mat, black, SBR quality, 3 mm thick, width 100cm, length 10m, non-slip, resilient covering for all high traffic areas, weather proof, lies flat, coarsely patterned underside, ideal for protecting cables of all types, matting can be trimmed to the desired size.32.9 kg/Piece |
Technical drawing - 85200 [219,8 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.
Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.
- Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Length: 100 cm
- Width: 29 cm
- Height: 4.8 cm
- Channels: 3
- Width Channels: 35 mm
- Height Channels: 30 mm, 35 mm, 30 mm
- Material: PU (polyurethane)
- Shore A hardness: 88 ± 4
- Flammability class: B2
- Operating temperature: -30°C to +60°C
- Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
- DEKRA certified - Certified product safety
- Weight 4,65 Kg
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
Reviews
There are no reviews yet.