Content | Universal speaker stand for loudspeakers till 35 kg, black powder coated.
Triangular foot, 35 mm square section tube, utility space 450 x 390 mmTube Ø 40 / 35 mm, adjustable 91,5 cm - 150 cm, T-screw for locking.
Πλευρά τριγώνου 43cm, ύψος τριγώνου 39cm
For heavy speakers you can lock the height on 102 - 114 - 126 - 138 - 150 with the safety pin (included in delivery). Utility space for speakers: 230 x 230 mm, steel material thickness 2 mm, slip resistant surface. Plastic cable clip on upper tube for adequate and discreet cable guiding.
The foot can be equipped with 3 adjustable plastic feet or steel-spikes. Without the plate you can use the speaker stand with a standard speaker stand receptable (Ø35mm).
The product is delivered dismantled, with screws and hexagon socket screw key, 3 plastic feet and 3 steel spikes with lock nut.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height:
915 mm
Max height
1500 mm
Joint material
plastic
Tubing diameter
35 / 40 mm
Max. load
35 kg
Weight
4,4 kg
Additional information
Footprint 230 x 230 mm | A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Interchangeable rings
1 x 20 mm , 1 x 30 mm
Black ring pack included
Yes
| The Gravity studio monitor stand GSP 3202 VARI-TILT® features a heavy, triangular base made of cast iron and a 25x25 cm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 90 to 150 cm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.
Product type
Stands and Tripods
Tubing surface
Powder coated
Height adjustment
Clamp with safety pin
Base edge length
292.5 mm
Tubing diameter
42 mm / 35 mm
Centic load capacity (without spikes)
30 kg
Centic load capacity (with spikes)
10 kg
Interchangeable rings
1 x 15 mm, 1 x 20 mm, 1 x 30 mm
Black ring pack included
Yes
Additional information
Including acoustic isolation spikes
|
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
| Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: S
- Dimensions: 176 x 200 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
| The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt.
Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange.
Package Contents
- 4 x 2.5” stand "posts”
- 4 x 5” stand "posts”
- 4 x middle stabilizers
- 10 rubber feet (10mm)
- 5 rubber feet (18mm)
- 10 screws (for mounting posts)
Features
- Fits all 4” and 5” studio monitors
- Allows for 2 height adjustments: 2.5” and 5”
- Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
- Middle stabilizers: Vinyl-laminated MDF
- Stands: Polypropylene plastic
- Rubber: Highly absorbent, 40 Durometer
- Size (packed): 5.94 x 7.44 x 4.5”
- Max load 10kg per unit
- Weight: 0.9kgs/giftbox
Measures
- Total depth: 185mm
- Distance between front and rear rubber support: 127mm
- Total width: 142mm
- Distance between left and right rubber support: 117mm
|
Reviews
There are no reviews yet.