ADASTRA BCS65S Bluetooth Ceiling Speakers 6,5 (Pair)

A ceiling speaker set with switchable Bluetooth connectivity, offering unrivalled simplicity in terms of pairing with and playback from compatible devices. The set includes 2x6.5" ceiling speakers, including an active speaker with Bluetooth receiver and a passive, slave speaker. The active speaker\'s RCA line input and output enable daisy-chaining of multiple sets. Each speaker features low and high frequency drivers and flared baffles for a smooth, full-range response. With understated, low-profile, magnetic grilles, these speakers are suitable for domestic and commercial use, with dog-ear clamps and an in-line 12V DC power supply for ease of installation.

• Supplied as a pair (active + passive)
• Switchable Bluetooth connectivity
• Line input and output
• Frameless magnetic grille
• In-line 12V DC power supply
• Mounting Depth: 100mm (active), 80mm (passive)
• Dimensions: 99x234mmØ (active), 77mx234mmØ (passive)

1x Active bluetooth speaker, 1x Passive bluetooth speaker, 1x In-line 12V DC power supply

Driver Complement
Mid/Woofer     1 - 8" Diameter (20.32cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 1" Diameter (2.54cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     35Hz-20kHz
Lower -3dB Limit     50Hz
Upper -3dB Limit     20Khz
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     90 dB
Dimensions
Overall Diameter     10-5/8“(26.99cm)
Cut-out Diameter     9-3/8“(23.81cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-7/8" (9.84cm)
Overall Depth     4-3/8" (11.11cm)
Shipping/Other      
Product Weight     3.5000 lbs. (1.59kgs) each
Total Shipping Weight     5.0000 lbs. (2.27kgs)
Speaker Warranty     Lifetime Warranty

Features:

Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.

Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums

• Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
• Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
• Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
• Directivity Factor (Q) : 8.7 (1k - 16kHz)
• Directivity Index (DI) : 9.4 dB (1k - 16kHz)
• Long-Term System : 250 W (1000 W peak), 2 hrs
• Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
• Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
• Maximum SPL6 : 118 dB cont ave (124 dB peak)
• Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
• Nominal Impedance : 8 ohms
• Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
• Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
• Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
• Net Weight : 16.0 lbs. (7.3 kg)
• Shipping Weight : 19.4 lbs. (8.8 kg)