Content |
A ceiling speaker set with switchable Bluetooth connectivity, offering unrivalled simplicity in terms of pairing with and playback from compatible devices. The set includes 2x6.5" ceiling speakers, including an active speaker with Bluetooth receiver and a passive, slave speaker. The active speaker\'s RCA line input and output enable daisy-chaining of multiple sets. Each speaker features low and high frequency drivers and flared baffles for a smooth, full-range response. With understated, low-profile, magnetic grilles, these speakers are suitable for domestic and commercial use, with dog-ear clamps and an in-line 12V DC power supply for ease of installation.
- Supplied as a pair (active + passive)
- Switchable Bluetooth connectivity
- Line input and output
- Frameless magnetic grille
- In-line 12V DC power supply
- Mounting Depth: 100mm (active), 80mm (passive)
- Dimensions: 99x234mmØ (active), 77mx234mmØ (passive)
Contents
1x Active bluetooth speaker, 1x Passive bluetooth speaker, 1x In-line 12V DC power supply
|
Driver Complement
Mid/Woofer 1 - 8" Diameter (20.32cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 1" Diameter (2.54cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 35Hz-20kHz
Lower -3dB Limit 50Hz
Upper -3dB Limit 20Khz
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 90 dB
Dimensions
Overall Diameter 10-5/8“(26.99cm)
Cut-out Diameter 9-3/8“(23.81cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-7/8" (9.84cm)
Overall Depth 4-3/8" (11.11cm)
Shipping/Other
Product Weight 3.5000 lbs. (1.59kgs) each
Total Shipping Weight 5.0000 lbs. (2.27kgs)
Speaker Warranty Lifetime Warranty
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
| Recommended Usage In-Ceiling Front / Surround Speakers
Type 2-way coaxial
Woofers 6 1/2” PP (polypropylene) mica cone
Tweeters 1” fluid-cooled soft dome
Swivel Tweeter and Midrange Driver (Tweeters)
Paintable Grill with Protective Cover Included Yes
Frequency Response 65 Hz – 28 kHz
Sensitivity 90 dB (2.83 V, 1 m)
Input Power (Maximum / Nominal) 110W / 40W
Impedance 8 Ohms
Product Dimensions (W x H x D) 9-1/2“x 4-5/8“
Mounting Depth 4-1/4”
Product Weight (lbs. each) 3.3 |
Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums
|
- Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
- Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
- Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
- Directivity Factor (Q) : 8.7 (1k - 16kHz)
- Directivity Index (DI) : 9.4 dB (1k - 16kHz)
- Long-Term System : 250 W (1000 W peak), 2 hrs
- Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
- Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
- Maximum SPL6 : 118 dB cont ave (124 dB peak)
- Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
- Nominal Impedance : 8 ohms
- Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
- Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
- Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
- Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
- Net Weight : 16.0 lbs. (7.3 kg)
- Shipping Weight : 19.4 lbs. (8.8 kg)
|
Reviews
There are no reviews yet.