Content |
Weatherproof sound projectors with injection-moulded body and coated steel grille. Suitable for indoor or outdoor music and speech applications. Fitted with 350mm four core input cable for different power ratings. The transformer may be bypassed internally to give an 8 Ohms, 25W load.
Adjustable steel mounting bracket
Weatherproof ABS enclosure
Housing material | ABS | Woofer | 165mmØ (6.5“) reinforced cone | Tweeter | Concentric 25mm (1“) mylar dome | IP rating | IPX5 | Frequency response | 100Hz - 17kHz | Power | 25W @ 8 ohms |
|
- 100 Hz to 21 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 5W tap at 70V, 10W tap at 100V
- Nominal maximum output: 89 dB at 70V, 92 dB at 100V
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white. |
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
BS-33AT | | Rated Input: | 6W (100V line), 3W (70V line) | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W) | Sensitivity: | (1W, 1m): 91dB | Frequency Response: | 120 – 15,000Hz (–20dB) | Speaker Component: | 5" (12cm) cone-type | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | Connetion: | Push-in connector (bridging terminal) | Attenation Level: | 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | Finish: | Case: ABS resin, off-white | Rear bord: | Hard board | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control) | Wall Mounting Case front mount: | 184mm (7.24“) | Dimensions: | Fixing hole mount: 120mm (4.72“) | Weight: | 810g (1.79 lb) | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2 |
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white.
BS-634 |
| Speaker Component: | 5" (12cm) Cone-type | Impedance: | 100V LINE: 1.7 kΩ (6W), 3.3 kΩ (3W), | Sensitivity: | (1w 1m) 90dB | Frequency Responce: | 120 -20,000Hz | Input Terminal: | Push-in terminal | Finish: | Cabinet:HIPS resin, off white, paintable. Grille: SECC, off white, paintable | Dimensions: | 320(W)x200(H)x85(D)mm |
|
The latest addition to TOA's acclaimed speaker line, the new F-2000 F-1300and F-1000 Series of compact,
high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.
• Finish in Black or White
• Weather proof version available (F-1000BTWP)
• Low impedance and 100V versions (F-1000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection
Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.
Specification | Model F-1000B | Enclosure Type | Bass-reflex type | Power Handling Capacity | 30W(continous pink noise)90W (continous program) | Impedance | 8Ohm | Sensitivity | 87dB (1w,1m) | Frequency Responce | 85-20,000Hz | Crossover Frequency | 5kHz | Directivity Angle | Horizontal 90°, vertical 90° | Speaker Componenrs | Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 130(W) × 202(H) × 131(D)mm | Weight | 1.8 kg (3.97 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set | Option | Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A |
|
Reviews
There are no reviews yet.