TOA BS-633AT Wall mount speaker

32.53 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The BS-633A/AT are wall-mount 5″ (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap […]

 

Read more

The BS-633A/AT are wall-mount 5″ (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

BS-33AT  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)
Sensitivity: (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5″ (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81″ × 7.68″ × 3.98“) (excluding volume control)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 810g (1.79 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16″ x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16″ x 0.63“)) × 2

 

Weight 0.81 kg

Reviews

There are no reviews yet.

Be the first to review “TOA BS-633AT Wall mount speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA BS-633AT Wall mount speaker removeTOA F-1000BT full range wide dispersion speaker removeJBL CONTROL 25AV - Monitor Speaker 200W 5.25'' 2-way WHITE (price per item) removeTOA F-1000BTWP 100V weather proof line full range speaker removeTOA F-2000WT Speaker 8" 2 Way, 60W/70Volt, White removeTOA F-2000WTWP Wide-dispersion Speaker System 60W/100V remove
NameTOA BS-633AT Wall mount speaker removeTOA F-1000BT full range wide dispersion speaker removeJBL CONTROL 25AV - Monitor Speaker 200W 5.25'' 2-way WHITE (price per item) removeTOA F-1000BTWP 100V weather proof line full range speaker removeTOA F-2000WT Speaker 8" 2 Way, 60W/70Volt, White removeTOA F-2000WTWP Wide-dispersion Speaker System 60W/100V remove
Image
SKUBS-633ATF-1000BTCONTROL 25AV WHITEF-1000BTWPF-2000WTF-2000WTWP
Rating
Price 32.53 incl. GR VAT 118.00 incl. GR VAT 274.99 incl. GR VAT 146.00 incl. GR VAT 269.00 incl. GR VAT 325.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.

BS-33AT  
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W)
Sensitivity: (1W, 1m): 91dB
Frequency Response: 120 – 15,000Hz (–20dB)
Speaker Component: 5" (12cm) cone-type
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16)
Connetion: Push-in connector (bridging terminal)
Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Finish: Case: ABS resin, off-white
Rear bord: Hard board
Dimensions: 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) (excluding volume control)
Wall Mounting Case front mount: 184mm (7.24“)
Dimensions: Fixing hole mount: 120mm (4.72“)
Weight: 810g (1.79 lb)
Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63“)) × 2

 

The latest addition to TOA's acclaimed speaker line, the new F-2000 F-1300and F-1000 Series of compact,
high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.

• Finish in Black or White
• Weather proof version available (F-1000BTWP)
• Low impedance and 100V versions (F-1000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection

Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.

Specification Model F-1000B
Enclosure Type Bass-reflex type
Power Handling Capacity 30W(continous pink noise)90W (continous program)
Impedance 8Ohm
Sensitivity 87dB (1w,1m)
Frequency Responce 85-20,000Hz
Crossover Frequency 5kHz
Directivity Angle Horizontal 90°, vertical 90°
Speaker Componenrs Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter
Input Terminals Push-in terminal
Finish HIPS, black
Dimensions 130(W) × 202(H) × 131(D)mm
Weight 1.8 kg (3.97 lb) (including the supplied brackets)
Accessories Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set
Option Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A

 

PRICE IS PER PIECE AND NOT PER PAIR!

  • 70 Hz to 23 kHz frequency range (-10 dB)
  • 200 watts continuous program power capacity
  • 87 dB sensitivity (1W/1m)
  • 100° x 100° nominal dispersion
  • 60W, 30W, 15W, 7.5W taps at 70V
  • 60W, 30W, 15W taps at 100V
  • 8 ohms bypass
  • 3 kHz crossover frequency
  • High-Impact Polystyrene (HIPS) enclosure
  • Video shielded for use near video monitors
  • Stainless steel grille for harsh environments
  • Zinc-plated screw down input terminal strip
  • Available in black or white (Control 25AV-WH)
  • Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
  • Net Weight:  4.0 kg (9 lb)

F-1000BTWP: 100V weather proof line full range speaker

Weather Proof version of the F-1000BT

IPX4 Water rated

Specification Model F-100BTWP
Enclosure Type Bass-reflex type
Rated Input 15W
Impedance 100V line 670Ω(14W), 2kΩ(5W),33kΩ(3W),10kΩ(1W)
Sensitivity 87dB (1w,1m)
Frequency Responce 85-20,000Hz
Crossover Frequency 5kHz
Directivity Angle Horizontal 90°, vertical 90°
Speaker Componenrs Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter
Input Terminals Push-in terminal
Finish HIPS, black
Dimensions 130(W) × 202(H) × 131(D)mm
Weight 2 kg (3.97 lb) (including the supplied brackets)
Accessories Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set, Terminal covers x 1, Terminal cover mounting screws.

F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 70V.

Features:

  • Compact box speakers for music and voice paging distribution
  • Excellent sound quality
  • Octagonal horn design for smooth coverage
  • Adjustable high frequency dispersion
  • Extruded cabinet design improves low frequency performance
  • Individual protection circuit on each component
  • Screwdriver-adjustable power taps
  • Paintable grille and enclosure
  • Wall/ceiling-mount bracket included
  • Optional board, cluster and pole-mount brackets
  • OmniMount-compatible (Series 20.5CA/WA)
  • Optional subwoofers, model HB-1, FB-100 or FB-120
  • Five year warranty

Specifications:

  • LF Driver: 8” cone woofer
  • HF Driver: 1” hard-dome tweeter
  • Crossover: 2.5kHz
  • Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
  • Sensitivity (1W, 1m): 93dB SPL
  • Dispersion (adjustable):
    110° H x 100 ° V
    80° H x 80° V

The F-2000 Series Speaker are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed in a manner ideal for the location and intended application. The F-2000WTWP features a water-proof design (splash-proof type meeting IPX4 standard), so that it can be permanently installed outdoors.

Specification
Enclosure Bass-reflex type
Rated Input 60 W
Rated Impedance 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W)
Sensitivity 92 dB (1 W, 1 m) at installation in 1/2 free sound field
93 dB (1 W, 1 m) at installation in 1/2 free sound field (with horn adapter)
Frequency Response 65 - 20,000 Hz, -10 dB at installation in 1/2 free sound field
Crossover Frequency 2.5 kHz
Directivity Angle Horizontal: 110゜, Vertical: 100゜ Horizontal: 80゜, Vertical: 80゜ (with horn adapter)
Speaker Component Low frequency: 20 cm (8) cone-type High frequency: 25 mm (1“) dome tweeter“
Input Terminal Push-in terminal
Water Protection IPX4
Operating Temperature -10℃ to +50℃ (14゜F to 122゜F)
Finish Enclosure: HIPS, white
Punched net: Surface-treated steel plate, white, anticorrosive paint
Joint bracket, wall bracket: Stainless steel (SUS304), t2.0
Speaker bracket: Die-cast aluminum, white, paint
Dimensions 244 (W) × 373 (H) × 235 (D) mm (9.61 × 14.69" × 9.25“)“
Weight 7.4 kg (16.31 lb) (including the supplied brackets)
Accessory Speaker bracket …1, Joint bracket …1, Wall bracket …1, Bracket fixing screw … 1 set,
Horn adapter …1, Horn adapter mounting screw …4, Terminal cover …1,
Terminal cover mounting screw …4
Option Speaker mount bracket: SP-131, YS-60B

 

Weight0.81 kg1.80 kg4.00 kg2.00 kg6.50 kg7.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.81 kg
Weight 1.80 kg
Weight 4.00 kg
Weight 2.00 kg
Weight 6.50 kg
Weight 7.40 kg