Content | Aftermarket Replacement Diaphragm B40606 for NEXO PS10R1 B&C MMD45 DE45 8 ohms
To fit B&C DE45 Compression Driver.
- Titanium diaphragm
- Voice Coil : 44 mm
- Out ring diameter : 77.5 mm
- Total Length : 111.7 mm
- Impedence: 8 ohms
MMD045R8 - B40606 |
- JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
- Fits JBL MPRO 400 Series
- 8 Ohm
| JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets. | JBL D8R2408 Diaphragm refurbished
JBL: 2408, JBL 2408H, 361549-001x, 8350, MRX-500, MRX500, MRX 500, MRX-512M, MRX512M, MRX 512M, MRX-515, MRX515, MRX 515, MRX525, PRX-512, PRX512M, PRX 512M, PRX-512MI, PRX512MI, PRX 512, PRX-515, PRX515, PRX 515, PRX-525, PRX525, PRX 525, PRX-535, PRX535, PRX 535, PRX-535S, PRX535S, PRX 535S, VT-4887A, VT4887A, VT 4887A, VT-4887ADP-AV/CN/DA, VT4887ADP-AV/CN/DA, VT 4887ADP-AV/CN/DA, and many more!
Please check the model and size of your speakers before ordering to be sure you receive the correct diaphragm repair kit!
|
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Reviews
There are no reviews yet.