RPM500 offers pure and accurate frequency response from 50Hz to 30kHz. The 90-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition Pure and accurate frequency response from […]
RPM500 offers pure and accurate frequency response from 50Hz to 30kHz. The 90-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Pure and accurate frequency response from 50Hz to 30kHz
90-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
50-Watt 5 ¼-inch (133.3mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs
Dimensions (each): 12.5″ x 10.1″ x 8“
Weight (each): 17.2 lbs
Power configuration: Bi-amplified
LF Driver size: 5.25 inch (133.3mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 50-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 50 Hz to 30 kHz
Weight
7.80 kg
Reviews
There are no reviews yet.
Be the first to review “AKAI RPM-500 Active studio monitor 90W (Piece)” Cancel reply
RPM500 offers pure and accurate frequency response from 50Hz to 30kHz. The 90-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Pure and accurate frequency response from 50Hz to 30kHz
90-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
50-Watt 5 ¼-inch (133.3mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs
Dimensions (each): 12.5" x 10.1" x 8“
Weight (each): 17.2 lbs
Power configuration: Bi-amplified
LF Driver size: 5.25 inch (133.3mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 50-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 50 Hz to 30 kHz
PRICE PER UNIT
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
115dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
Integral through cancellation magnets or by magnet design
Box :
7-1/2" (19mm) MDF panels
Finish :
Dark red natural veneering side panels, black body
Dimensions (HxWxD) :
9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight :
30.8lb (14kg)
PRICE PER UNIT
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer
Number
1
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
35 Hz - 50 kHz
THD > 80 Hz
≤0.8 %
Long term output
≥110 dB
Max. peak
≥120 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
23.8 lb (10,8 kg)
Magnetically shielded
Optional
Height x Width x Depth
14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.