AKG CS MK 10M Connecting cable 10m

Connecting cable for connecting the individual CS 2 microphone stations, 10 m (33 ft.) long.

• Base Station for up to 200 Microphone Stations
• Intuitive controls
• Superior audio quality
• Voice activation and NOM limitation
• Standard ins and outs for external equipment

AKG Conference System CS 2 is fully modular and therefore highly flexible, allowing users to create a custom system for any conference application. From microphone capsules to power supplies, designers will find exactly the right components for every type of conference system.  Analog control is provided by the Base Station.

Supplied ceiling-mounting brackets facilitate installation.
Equipped with power indicator LED.
The IR-510R covers a practical radius of approx. 8 m.

Rugged infrared receiver for up to seven selectable channels, for use with headphones, e.g., AKG K 77. Operates for more than 12 hours per battery charge.

The CS 5 IRR7 shall reproduce the floor channel and 6 translated languages. It shall have a 3,5mm stereo jack to connect any stereo headphone, a volume potentiometer and an easy selector switch. It shall have a built in NiMh rechargeable battery to supply the unit for up to 13 hours operation time. The unit shall switch off automatically when loosing the signal to save power. It shall be rechargeable with charging contacts on the housing.

Infrared radiators providing wireless transmission of up to seven language channels for persons (e.g., observers) listing to a conference without asking for the floor.

The infrared radiators shall connected to the CS 5 BU through 2 BNC connectors and 50 Ohm coaxial cabling and serial concatenation. It shall transmit a  PPM system modulated time-multiplex outputs of the central unit shall drive an arbitrary number of radiators. The CS 5 IRT1 shall have a radiation angle of +/- 22° and a working distance of 300 meters (with 50% down). The CS 5 IRT2 shall have a radiation angle of +/- 22° and a working distance of 500 meters (with 50% down).

As accessories of the infrared radiators the holding frame needed for mounting it to the side wall or the ceiling shall be included. The transmitter shall have a built in switchable power supply with IEC connector.